[MOD] XYL KM9 Unicorn Blaster Overhaul! (With metal and 3-D printed upgrade parts)
Вставка
- Опубліковано 3 лип 2024
- In this video, we completely overhaul the XYL MK9 Unicorn, a foam dart blaster. I take you through the process of breaking down the blaster, giving it a sweet dye job, and adding an awesome upgrade kit from Black Raisins along with some 3-D printed parts. This blaster is now shooting upwards of 200 FPS and looks much more tactical. Check out the video to see how I did it and let me know what you think in the comments.
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
SUBSCRIBE HERE: / naptownnerf
[Please follow me on the platforms below]
My Instagram: / naptownnerf
My Facebook page: / naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! teespring.com/stores/naptown-...
Unicorn Review: • [REVIEW] XYL KM9 Unico...
[Buy Here]
Unicorn Blaster: outofdarts.com/products/xyl-u... or blackraisins.com/collections/...
Black Raisins Unicorn Upgrade Kit: blackraisins.com/collections/...
Upgrade Barrel: (this is a longer threaded version of the one I have, which is an upgrade but 2in longer) outofdarts.com/products/xyl-u...
BCAR - blackraisins.com/collections/...
Dye - amzn.to/3RJOOsj
Blaster work mat - amzn.to/
474StW2
Hex screwdrivers - amzn.to/48cned4
3-D Printed Files:
Buffer tube - www.thingiverse.com/thing:616...
Top Picatinny - www.thingiverse.com/thing:617...
Threaded barrel piece - www.thingiverse.com/thing:624...
Hardware needed with 3-D printed parts:
M3 screws (for buffer tube) - amzn.to/3RqDHTR
M4 bolt (for buffer tube) - amzn.to/3RLeHaj
Brass inserts (for Piccini rail) - amzn.to/3tccyw1
Worker darts - outofdarts.com/products/worke...
Out of Darts dye mod guide - • Add some color to your...
Time codes:
0:00 - Intro
0:13 - Unicorn mod overview
2:49 - Upgrade parts overview
6:18 - Upper receiver teardown
6:51 - Barrel mod diagnostic
8:35 - Barrel reassembly time lapse
8:44 - Lower receiver teardown
10:39 - Dyeing process time lapse
13:38 - Mod completed
16:25 - Blaster first test
18:08 - Final thoughts
#nerf #nerfmod #3dprinted
Track: Outer Space - SOMM [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Outer Space - SOMM | Free Background ...
Free Download / Stream: alplus.io/outer-space - Розваги
With the prime being tough at times, I found that was more caused by the barrel than the spring. The stock barrel included with the blaster has that middle section that is machined to be a little thinner (probably around 15mm) around where the priming block is. When you change the barrel to a fully 16mm od barrel, the priming block can get caught up on it. I'm not sure if anyone has designed a new priming block with a slightly wider hole, but it's worth looking into. You could swap back to the old barrel just to make sure that's the issue, but obviously that would knock your performance back down.
Yeah, I talk about all this in the second video that will be coming out next week. Also, after shooting that video, I found out that they do make a 11 1/2 inch replacement barrel that is threaded now. I put the link in the description.
Oh cool. Nevermind then lol
@@NaptownNerf you could probably get a updated one if you email out of darts customer support for free
Love it! That purple dye looks great
That dye job came out looking great
it amazases me now that 200 fps is kinda the norm now a couple of years ago 200 was a holy grail build shows u how quick stuff moves
Awesome job on the dyeing. The Geese must like it cause they wanna know the fps reading too lol.
Wow. What an upgrade!!
Heya Naptown. Thanks for the great video. It shows me that I dont need to spend the money on the metal parts to get 200fps+.
Use 29cm of Swift barrel and a Kronos 18kg spring, and your there with worker bamboos and your choice of bcar. And its not a hard prime.
The prime on the blaster does get easier once the priming blocks bearing wears into the barrel. The factory barrel has the thinner outer section so the bearing dont destroy the barrel.
The factory barrel and a Bigshock spring gets it to 130 fps if you wanna use it for hvz.
Its not a bad little blaster, and its great for cqb stuff.
Try a 30cm barrel with the BlackRaisins 1.6 long spring and a 1”inch spacer.
That set up for me is doing 230 on red workerHE’s 1.g
Yeah, I'm going to buy one, but I need to get it from Biu Blaster as Out of Darts can't ship it here to NZ ;-; It's also NZ$148 last I checked, but that's with GST and shipping, so not that bad.
And daaaaaaaamn, that dye job looks bloody good, nice work!
Thanks. It definitely turned out pretty darn well, especially for my first attempt.
Looks great! I don't know if that rough of a prime is worth it, but I'd be curious to see how it fares after a day of game use. Good job!
Stay tuned for next weeks video. Full testing done with multiple barrels and springs.
Do you find that the pusher no longer engages the slam fire mechanism causing it to not fire sometimes?
I did have this problem a few times at first with the beefier spring and the long harrier barrel. But when I tested with their barrels, I didn't seem to have the issue. So I wasn't sure if this is a problem with the kit or just with this set up that wasn't really intended.
Just be be careful with the pusher o-rings on this kit tending to fall off...a lot under hard use
nice sbr buid unicorn not my yhing but u made i look good and shoot right
Unicorn MK9 gel blaster.
200 fps nylon for 48 dollars.
Foam darts blaster are not for me
Cool mod but kinda defeats the purpose of the Unicorn 🤔
officer its airsoft i swear