This is an older video but let me tell you YOU HELPED ME PASS MY TEST!!! I needed more references to get my truck at the correct angle, kept it straight backing up and got it in the box! My truck was a little crooked but baby it was in that box! Thanks so much keep doing what you’re doing!
I just earned my unrestricted CDL this past January. At first, I was terrible at parallel parking, but once I studied how the truck moves from an outside perspective by watching the instructors and playing with die-cast 18-wheeler models trucks and learning all my landmarks for the tractor and trailer tires--I finally got it an aced this portion of my CDL test with one of the best examples my CDL examiner had ever seen he told me. I mean, I had that 48-foot trailer in that box in just 3.0 minutes on my test!
This is the best and most helpful instructional video. I recently failed my CDL test on the parallel maneuver. The school and the test site cones were said to be identical. They weren't. After my first turn, then straightened up, I was taught to straight back until the start cone (with the pipe) is next to my shoulder. Works perfectly at the school every time. I did my steps exactly right, then I was failed. My mistake was backing until the cone was at my shoulder. Because the test site box was set up different. My school instructors said they set their cones up exactly the same. They were wrong. But it's my fault as the driver because it's up to me to notice these things. There were no lines to watch my rear tandems to stop at so I will use my G.O.A.L. and also stop when my cone reaches the fuel tank. I'm watching these videos to learn from my mistake and do better next time.
@@truckerstevecdlinstructor Thank you. Now that I have experienced the exam, I am very comfortable with the process. My rhythm was effected a couple times by the examiner skipping stuff, but my pre trip and In cab were an easy pass. My straight back and offset were executed without any pull ups. I was completely gutted when I executed the parallel exactly the way I do every day, but the exam set up was so different it didn't work. I never hit any cones, but I was too deep in the box after I straight backed in. (before the next step of curving the trailer into the box). Today I told my instructor that he needs to adjust the school set up because all 4 students that tested failed on stuff we do easily at the school. It's our fault. I get that. But we followed step by step instructions to the letter and they didn't work.
You need to know not to go to deep when you back into the space. If the front cone on the left is in front of your tractor, you are to deep. You can also be to deep because you are not center in the lane. Best to you!
@@truckerstevecdlinstructor Thank you. I noticed. I'm ready now. For over a month I have been taught to back u until my shoulder or steps lines up with the cone. Every single time that has worked perfectly. When I told my instructor and other students the details they were all shocked. I told them all to be careful and focus on the rear axle. Forget the cone because that's a fail. I want to see all of the students in my class pass.
I needed this video, Thank you Leader,,I was having problems when backing on the parallel test, but now I see what to do on the final test, it was today but I asked for extra time and practice , Don't want to miss on the first trial.
Love your videos the trailer I’ll be using is 28ft and only one set of wheel out back but your videos are beyond helpful I’ve struggled doing parallel and my dmv is incoming I won’t have practice with your method but I will use it to pass my test!
Going to be taking my test in exactly 2 weeks from today. Your vids helped better then the school I'm at lol. They didn't give me any references or anything other then these two marks they have on the trailer. Didnt show me how to fix problems or nothing. Thank you, helped out alot.
Steve, what if I doing the test with a truck with only one axle on the back of the trailer, when backing up to the box, should the back tire of the trailer be on the line as well before I turn the wheel to the righr to bring the Tractor in?
I failed it yesterday the cones were lined up different ant my school I was able to dominated like nothing once in the dmv I was a little confused passed my pre trip air brake check , straight line , offset a, got to go ba j
This is an older video but let me tell you YOU HELPED ME PASS MY TEST!!! I needed more references to get my truck at the correct angle, kept it straight backing up and got it in the box! My truck was a little crooked but baby it was in that box! Thanks so much keep doing what you’re doing!
Thank you so much! May I ask you what CDL School did you attend also the State. Just trying to be of help to as many students as possible.
@@truckerstevecdlinstructor South Carolina 160 driving academy
I just earned my unrestricted CDL this past January. At first, I was terrible at parallel parking, but once I studied how the truck moves from an outside perspective by watching the instructors and playing with die-cast 18-wheeler models trucks and learning all my landmarks for the tractor and trailer tires--I finally got it an aced this portion of my CDL test with one of the best examples my CDL examiner had ever seen he told me. I mean, I had that 48-foot trailer in that box in just 3.0 minutes on my test!
Congratulations CDL Driver! Liked your comment.
Hi 👋
Thank you so much. Teacher 👨🏫.
You the Best…..
You have a wonderful day.~
From: Hawaii.~~~
This is the best and most helpful instructional video.
I recently failed my CDL test on the parallel maneuver. The school and the test site cones were said to be identical. They weren't. After my first turn, then straightened up, I was taught to straight back until the start cone (with the pipe) is next to my shoulder. Works perfectly at the school every time. I did my steps exactly right, then I was failed. My mistake was backing until the cone was at my shoulder. Because the test site box was set up different. My school instructors said they set their cones up exactly the same. They were wrong. But it's my fault as the driver because it's up to me to notice these things. There were no lines to watch my rear tandems to stop at so I will use my G.O.A.L. and also stop when my cone reaches the fuel tank. I'm watching these videos to learn from my mistake and do better next time.
You are a good student and appreciate your comment. Pass and get your CDL
@@truckerstevecdlinstructor Thank you. Now that I have experienced the exam, I am very comfortable with the process. My rhythm was effected a couple times by the examiner skipping stuff, but my pre trip and In cab were an easy pass. My straight back and offset were executed without any pull ups. I was completely gutted when I executed the parallel exactly the way I do every day, but the exam set up was so different it didn't work. I never hit any cones, but I was too deep in the box after I straight backed in. (before the next step of curving the trailer into the box). Today I told my instructor that he needs to adjust the school set up because all 4 students that tested failed on stuff we do easily at the school. It's our fault. I get that. But we followed step by step instructions to the letter and they didn't work.
You need to know not to go to deep when you back into the space. If the front cone on the left is in front of your tractor, you are to deep. You can also be to deep because you are not center in the lane. Best to you!
@@truckerstevecdlinstructor Thank you. I noticed. I'm ready now.
For over a month I have been taught to back u until my shoulder or steps lines up with the cone. Every single time that has worked perfectly. When I told my instructor and other students the details they were all shocked. I told them all to be careful and focus on the rear axle. Forget the cone because that's a fail. I want to see all of the students in my class pass.
I needed this video, Thank you Leader,,I was having problems when backing on the parallel test, but now I see what to do on the final test, it was today but I asked for extra time and practice , Don't want to miss on the first trial.
Thanks trucker Steve passed my cdl test first time with your methods.
Way to go! Be safe, use the Smith System of safe driving.
This looks like the video that’s going to help me I test in a week
Let me know how your test goes. Give me the results.
Great video Steve thanks
Love your videos the trailer I’ll be using is 28ft and only one set of wheel out back but your videos are beyond helpful I’ve struggled doing parallel and my dmv is incoming I won’t have practice with your method but I will use it to pass my test!
Best to you on your MVA Test.
The best video I seen thank you 🙏
Thank you for your comment
This video is excellent!
Thank you for your comment.
Going to be taking my test in exactly 2 weeks from today. Your vids helped better then the school I'm at lol. They didn't give me any references or anything other then these two marks they have on the trailer. Didnt show me how to fix problems or nothing. Thank you, helped out alot.
Very helpfull demo.do one for blind side plz
Thank you so much
Thank you I hope this help me, in three days I’m going to have my test I hope the best of everyone
I got my CDL thank you
Steve, what if I doing the test with a truck with only one axle on the back of the trailer, when backing up to the box, should the back tire of the trailer be on the line as well before I turn the wheel to the righr to bring the Tractor in?
Can you give tips on how to adjust the truck if i dont see the cones after i setup straight.
I failed it yesterday the cones were lined up different ant my school I was able to dominated like nothing once in the dmv I was a little confused passed my pre trip air brake check , straight line , offset a, got to go ba j
It’s so important to set up the CDL school range the same as the MVA testing site. DMV sites
What accent am I hearing lol
Stright.....guys are missing a letter there.
Centered
@@truckerstevecdlinstructor like your videos. I just started yard training and these videos helped a lot. Thank you sir.
@@justinmoss2823 Thank you Justin.
2nd and 3rd cone
Center cone is the second. Backing in with the center cone in sight, will help Center the trailer into the alley when you back in