Hackett Gulch, Colorado 2022 Ford Bronco Badlands Sasquatch on 37's

Hackett Gulch, Colorado 2022 Ford Bronco Badlands Sasquatch on 37" Firestone Destination MT/2's. Zone Off-Road lift with just the front spacer for now, will be installing the rear spacer later this week, just a little bit of rubbing in the rear, front body mount, and rear of the front fender well.

[@ecii437]

Thx for sharing the video. I’m curious to know what you settled on for your suspension setup with the 37s because I have the same goal regarding minimal lift.

[@lifeb4work908]

At first, we ran leveling spacers in the front for about 8 months which worked great with minimal rubbing in the rear fenders. After that, we put on Icon coilovers. Note that this is on the sasquatch model. Depending on your factory setup there might be other mods that will need to be done.

[@dailydrivenshitboxes6524]

did you break any steering components with the 37s? prior to installing the broncbuster stuff

[@lifeb4work908]

I put them on before going to 37s just to be safe.

[@fullspeedfordbronco]

37’s with no lift?

[@lifeb4work908]

The front is lifted with just the strut spacer from the Zone Off-road 3" lift kit, I wanted to see how minimal of lift we could get without the 37's rubbing, trying to keep it as low as possible. The rear is still at stock height which its just a little lower than the front as of right now. We will be putting on the rear spacers later this week.

[@ecii437]

@@lifeb4work908 It’s been about a year now and I hope everything worked out well. I’d like to ask if you’re still happy with the setup and if you’d do anything differently if you had to do it over again? Thanks

[@lifeb4work908]

@ecii437 we ended up going with ICON CDEV coilovers and had a few warranty issues.
If we were to do it over again, I would have waited for Fox coilovers and had been more patient with the aftermarket catching up.
We sold the Bronco a few months ago, long story, and maybe we'll do a video why.
For now, we're going to wheel our Suzukis, and of course, we will keep making content.