El Cheapo LS Fuel System Install - Plus C10 gets an Interior on a 71 C10
Вставка
- Опубліковано 11 вер 2024
- I've been thrashing hard on the C10 lately! All of a sudden it seems like this truck is almost finished. I've never done a "cheap" efi fuel pump retro fitted into a stock tank, so fingers crossed it works. I used an Ebay in tank fuel pump and simply clamped it to the factory sending unit. A few fuel injection clamps and some hose later it was all hooked together. I still have to pressure test my lines, but I'm pretty confident. I also managed to get most of the C10's interior back together. I transferred over the door panel and glass to the new door, pressure washed the carpet and re-installed the bench seat. Starting to look like a truck again! Seems like I'll be tackling the wiring next! Stay Tuned!
Follow along on Instagram @ ddspeedshop
Check out the merch:
teespring.com/...
Send me your Junk
DD Speed Shop
Po box 42041
1881 Portage ave
Ferry Road RPO
Winnipeg, Manitoba
R3J 3X7
Let me know what you think about the truck guys!
In love with the truck. Fingers crossed with the motor..
It's looking good like it as a tough shortbed....Definitely liking the Exhaust it's going to sound good...
Looking pretty good, the LS swap is cool.
Best part is hearing the Canadian slang - "yoink" that part out. Love it!
Looking great Dan!! I’m an interior guy so would replace carpets but that’s just me.
Did the door locks work?
I laughed when you said the carpet looked fine when you stand far enough away. :)
I'm in my 60s now and love that your using what's
Available..it's getting to be a lost art ...making something out of nothing
Keep up the schoolin..
yeah saving a few bucks goes a long way.
That carpet reminds me of a apartment I had in 1978. :-)
sounds like u had a nice place haha
This is exactly what I needed to see. How to retrofit an in cab tank to EFI/Fuel Injection with an internal pump.
Awesome seeing the difference from Day 1, great series, Thanks for sharing.
thanks buddy! its coming along
Oh damn I'm surprised it took so much googling to get to a solution for these in-cab tanks for internal fuel pump. Nice work!
the truck is looking great ! one if my favorite body styles ! keep up the good work. nice to see someone working on stuff the way most of us “garage mechanics” do, no sponsors or rich backing just doing it cause you want to!
yup its just a hobby haha
One time we used the old funky gunky floor rug as a pattern, and cut another one for my friend's 55 Chev. It wasn't difficult to do, it fit right in, and it came out fine. My friend was happy with it.
The ol’ girl is starting to look like something now Dan , I love the vent windows on the older trucks and cars . One more thing we need to see more of Steve . Cheers
yeah im a sucker for anything with vent windows!
Last thing you said is the part that makes it a roller. Once it goes in an out the door, you can drive out to halfass's place and make the t body a roller. Since this has glass you will last longer outside with it unless you rape it around the light pole getting into drifting in a short side... I used to blast this old 56 caddy convertible that really nothing but paint wouldn't fix, even the top was tight with a glass back window was in it but damn off the side of guard rails was a blast. Couldn't kill car and we filled the back seat with empties. I get in my 56 short stepside factory with a rear broken brake line and go bout five miles and do a loop de loop and nail a tree sober. Pissed me off bad as I was driving careful and slow and crash dead 56
When it gets out of the garage and you can walk all around it at a bit of a distance... just enough so you can soak it all in 3/4 front and rear angle views will look amazing. Side view stares will really bring out an appreciation for what was done to make it a SHORTY.
That's how you put a truck together without throwing a ton of money at it and still make it cool like it can't wait to see more
Things keep moving right along.Nice to see things are going back together again .Keep up the great work. When the saying fits "new is good...but used is tested !" What a great vehicle to have fun with .
haha its been well tested
Glad to see you using the original tank , i like that they offer conversion products, i have 67 and using my original tank. I dont have a thousand dollars to spend on that stuff .keep up the good work.
This is a great string videos. Love seeing this old C10 resurrected.
"You guys can judge me in the comments..." Made me laugh... Keep up the good work! Love your innovation and how you solve problems.
haha im just winging it
Leaving the old carpet and interior pieces will give the next owner an idea of the original colors. Looking good.
figured theyd wanna pic the nxet color haha
You sir are a inspiration, work ethic,cool projects and beating the winter blues by keeping busy. Love it!
yeah i gotta keep busy.
Fuel lines look top notch Dan, keep up the great work and it'll be a good runner.
thanks craig!
Besides my truck in my logo, this year truck is another one of my favorite! Early 50 s ford truck is also my favorite too
yeah hard to argue with the look of those trucks
Looking good, can't wait to hear it run!
same here haha
Fine work Dan, it's coming together great...I'll come up to pick it up when it's warmer! Ha!
Deal!
Looks like you got it coming your way. You are sarcastic, humorous, mellow, competent & entertaining. But that's just me.
ill take those all as compliments haha
It’s really coming together now, it’s gonna make someone a cool little truck, I dig it....
yeah its a cool unit
NOISE IS A GOOD THINK !!! CANT wait to SEE it moving under its own POWER !! THANKS !
haha yeah thatll be sweeet
Great video! The fuel system is what I was waiting for can't wait to hear it fire up. With that exhaust, you won't be able to hear the fuel pump.
haha exacatly
My current project and yours have a lot in common, mine is less progressed. Watching you inspires me to keep going on mine.
nice! glad I could help somehow. get out there and start wrenching
That thing is going to roar with that exhaust like that. Loving this build
haha yeah itll be a little noisy
The door sounds good and solid when you close it so nice work on putting in all the floor parts!, can't wait to hear it run!
yeah its a solid truck
I have the stang coming along nicely as well.i had to pull front back off motor and pull the gear drive out..went to summit yesterday to get thrust bearing for billet dbl roller,but I mocked it back together and now my pulleys lined up..wont be long now..truck is coming along nicely..looking like We may be ripping holeshots bout same time💪👊✌
nice! keep making progress my friend
Weather stripping glue is called "Gorilla Snot". LOL
hahaha good to know
Looking really good. Won't be long now and you'll be able to fire it up. I think it's a keeper Dan
Can't wait for next video. Than off to the T
haha i hope i can let it go
Truck is coming together nicely! It won't take much more then you can get back on the little hot rod!
yeah a little more love
That's a fun project. I like the budget builds. Not all fancy but gets the job done.
yup nothing fancy here thats for sure haha
@@DDSpeedShop but it works!
It’s coming together quickly ! I am enjoying this build
awesome! thanks for watching
Looking very good...keep it up..cant wait to see more of T wrecks too..👍.....
yeah im ready to finish this thing up
I'm pretty stoked about it! So yeah!!
haha same
Its perfect! Get it running and its done! Beautiful!
haha totally agree
I am on the edge of my seat waiting to hear it! Your vids are the best, man. Love the look of the vehicles, and the relaxed presentation. Keep at ‘er!
thanks buddy! should be running soon!
We should be able to hear it run soon.... The pressure in the return line will only be the resistance to flow so no worries there....well done once again.
yeah im thinking itll be good
Dude! You do know that the fuel line you use INSIDE the fuel tank has to be special submersible fuel hose. Otherwise fuel will cause the outside of standard fuel hose to degrade VERY quickly. The outside layer of standard fuel hose is NOT designed to sit in fuel. Gates makes a special submersible fuel hose and it is sold in I think 6" or 8" lengths.
the pump came with a section of hose so i assume its ment to be in the fuel
@@DDSpeedShop Oh, yes then that would indeed be a section of the right type of fuel hose. Sorry to raise such an objection.
Nice job resurrecting that beater. Almost time to get that thing sold and move on to the hot rod.
yes and yes
Nv3500 would make this thing a really fun daily.
Nice, good to see you don't waste time on the 'non-essentials' 👍
haha i do not
Truck is coming along Great Dan!
thanks buddy
nice job. was rusted pretty bad. thank`s for the great video`s
yeah this truck liked to rust haha
For your shifter dilemma, put a nut between the 2 levers under hood, couple spot welds, then hook up to transmission. Still be column shift. Keep the videos up, liking all of them!!
good call!
I notice it all the time and have to say it. U go from standing beside a vehicle to laying under it all in the smoothest motion lol just had to put that out there
Haha its probably mostly the camera.
That C10 is looking very good! Good job!!!
thanks!
@@DDSpeedShop you are quite the car builder...And, you're very welcome. You and Dani seem to really enjoy each others company, never loose that magic.
Coming along my friend. Your videos show that you can have a good driver if you have some time, desire, a little money and spare parts. 👍🇺🇸🤙😃Keep up the good work.
thats the plan. thanks for watching!
And is my favorite style , is good video tank you for share 🤝👍
DD Word of the day "rinkydink"👍
haha thanks buddy
Nice truck I have a 1971 c10 I want to put a ls in it it has a 250 straight 6 now see you working on your make me want to do my truck !
Nice! Get out there and make it happen.
Use what ya got. Anythings a tool. Good ol' American ingenuity in the middle of an organized mess..
absolutely
The fuel system should work fine, I used an external Walbro pump for my '65 GTO when I put a FITech on it. I used the carb feed for the return and ran the high pressure 3/8 down the passenger side. The in cab tank makes it all real short and easy. When I do my '76 C10 I will probably do an in tank pump like you did on this one. Makes things easier if you can fit it through the sender hole. Wasn't enough room on the '65, the sender is real short.
Might seem boring compared to the T, but the C10 a cool project in its own right. Keep going on it.
yeah its just all the tedious stuff on the truck thats kinda boring. the T was a nice break
@@DDSpeedShop Over the 5 years it I was doing the '65 GTO, I took a year off in the middle of it, and months at a time while I was working solely on it. Was about 3 years total doing the frame off and repairing massive rust. Life soaked up another year, then 4 more years before I got it legal to drive. Divorce sucks the wind right out of ya. Had to build my shop to finish it and other projects, she got the shop I did the GTO in.
You have to take a break, go do something else, have fun, rekindle that burning desire to build something, because otherwise you get burned out and just quit. After welding and grinding for months at a time, I painted three other vehicles, and built two engines and transmissions, just so I could get a different kind of dirt under my nails.
Doing the creative fun stuff recharges you to then blast through the boring tedious crap. At least it does for me.
Looking Good man, Love those old trucks
yeah theyre cool old hot rods
Cool video, I have a 71' Chevrolet C-10 that I just started restoring. I'll be learning some stuff from your video, keep loading up new videos. New subscriber here👍🇺🇸..
Nice work getting to the fun part now ready for start up , you could’ve saved yourself a bit of mucking around by running the fuel return in one of the unused vent fittings on the tank I’ve done that and it works well, can’t wait to see that T coupe fired up and driving hot rods are so much fun building and driving them, keep up the awesome content and the live feeds it’s all good stuff, cheers from a fellow motor head from down under Tasmania Australia 🇦🇺 😎👍👍🍻
Thabks buddy! This other tank didn't have a vent on it for some reason. I'm stoked to get back on the T
Looks good! Getting excited for the first start. Next video can you get a close up if the to of the fuel sending unit where you squished everything together? Or maybe the seat is in the way....🤷♂️
Yes, I would appreciate that too.
yeah ill give it a once over on the next video
It's going to be done before you know it, great job!
hopefuly. thanks for watching!
Nice work on that fuel pump install and fuel system!
thanks!
Looking good! Go slow on the LS hook ups. I’ve never done one, and am about to embark on this job this summer
you got it buddy. i usually just film whatever im wrenching on haha
Between Dan here and Sloppy Mechanics anybody can do a swap cheaply. Even If you're not a fabricator it's been done enough it's within reach for a few extra bucks.
Mad Scientist Garage Yep! Just have never done one with the LM7 LS series engines. 327, 302, 390 engines (ford and Chevy) buy been out of the motor head scene for about 25 years and just now getting back to it. Thanks for the encouragement, by the way! Good stuff!
I don’t know how long that fuel pump stuff is going to last Dan. Keep knocking it out.... looks great! Hopefully you can drive it by this summer, it’s coming up fast. Ciao my friend!
I hope so too!
lovely stuff
The truck is turning out really badass. Sorry about the mouth.. But man it looking good.. I would put the hole truck in black primer. But that's just my opinion. Your doing one hell of a job. Keep up the great work.. And keep those wrenches on turnin and the tires on burnin.. Can't wait to hear that heartbeat rumble.. Lol..
yeah it needs to go away for a bit, might finish it up a little nicer later on haha
DD Speed Shop even if you get it up and running and get it out the door. Just to get the Tires in there.. But no matter what your working on. I'm here watching... It's always badass and awesome to watch..
gotta love gas tank behind the seat easy to take gas for mower , log spliter . better than cans . rubber mat good for floors then you can hose it out LOL going to sell it here or ebay . nice job, nice truck
Haha thanks buddy.
It's coming along. Another great video 👍👍🇨🇱
We used a tank from chevy van fit between rails behind rearend . I got one from s10 2 door blazer it was in rear also think 4drs are mounted on side of frame like fullsize truck. If you decide to go that route another cheap option for these trucks
thanks for the tip man! if i end up keeping it ill probably re do a few things haha
Looks good man! Canuck tire has doormat rolls that make excellent cheap truck rubber flooring 👌 just heat gun it a bit and send it lol
good call! you farmers have all the tips haha
Awesome Channel dude. Watching all the way from Australia. Truck looking awesome. Been watching the T project too. Usually watch out in the garage as I’m “trying” to weld something myself!!!
nice! get back to it my friend
Another great video Dan. Thanks for sharing your hard work.
thanks for the support!
Hey Dan trk coming along nicely wpuldnt be.to long now until she making those flowmasters talk also wanted to say i saw on old waylon wires channel ypu and Dani sent him some real nice t shirts i thought yhat was classy thing for you two to do they are sharp.ok man stay warm.
thanks! hes a hell of a dude
Awesome project....They all are
thanks for watching my friend
Good progress. Also excited for the first start up. (No hood scoop) 😁 you should keep the truck.
yeah im ready to hear it make some noise
I love the progress just make sure you are using “fuel injection” hose and clamps as I would hate to see all your hard work go up in flames 🔥
Love that you are keeping the tank in stock location!
haha your one of the few. im taking alot of heat over it
Lookin good man .. mint little shop truck 😎👍
yeha its a cool unit
Overall a nice old truck
thanks buddy
Great job Dan....Oh and by the way I seen my map on the bench..take care you two.
Thanks tory!
Damn you work fast, lol. Love the truck and the channel. I'm building a 71 f100 with an efi 302 for my daily right now. Looking forward to the next video
thanks buddy! sounds like a nice rig!
amazing stuff
I was watching where you put you carpet in I took some tractor trailer mud flaps and made some cuts to fit around the seat supports to kind of hold them into place and they work really good and that should cover up the carpet. Now I found mine along side the road so the cost was low.. And I have a miss matched set...might go good with the miss colored door.
good call. thanks for the tip
Has the fuel pump setup held up??? Thinking about doing the same. awesome work man
Looking good man you trucking along!!!
Thanks 👍
Possibly the simplest fuel system I’ve seen. Everyone uses rear tanks with twist lok lines and AN fittings. That stuff is pricey. This gets you on the road the quickest and cheapest. 👍
thats the point. hopefully its reliable too haha
DD Speed Shop if the hose and clamps hold 60psi you should be in business. I hope it works.
hi Dan the truck is turning out nice i have found on widow regulators and door handles white lithium grease is the cleanest last longer then wheel bearing grease and does not evaporate like wd40 awesome job
awesome! good call thanks
Danny..... Have you thought of doing an Air Ride set up on a Build? I'm from North Carolina. So LOW vehicles are are kinda popular. And I thing this C10 would look amazing sitting on the ground. But I understand the Canadian weather isn't practical.
yeah air ride would be cool but i don think im going for that look on this truck
it is almost nice enough to drive. i miss the good old days when the fuel tank was in the cab with you. that wouldn’t fly with today’s standards. imagine going into the chevy dealer and plopping down sixty grand for a new truck and the fuel tank was behind the seat.
haha that would be somthing
Let's hear this beast!!!
The weather should be changing soooon ,I am thinking c 10 tires smoking.great videos,
yeah im ready for spring haha
Looks great to me!
your easy to please haha
Digging that fuel pump job that is some country boy can survive right there I’ll tell you what dude get u some black AstroTurf w new seal plates u fly I buy
haha thanks man!
What pump did you use ? And does that eliminate the in line pump because you added a return rather than the Corvette filter everyone uses? Also where did you wire the pump into for power? Thank you great video
You also took the words right out of the haters mouths that was funny when you said that they could judge you in the comments section lmfao nailed it 👌
haha gotta beat em to the punch
@@DDSpeedShop and that you did
Love it! Going to be a sweet ole truck.
yeah its a cool unit
Getting there. If I did one I would want the tank outside of the cab. Lol. You would have to get pretty hard to open the tank. Seen a documentary about the old stangs get rearended and just throw gas all over the people in the car.
yeah if it was a keeper id of put the tank udnder the bed for sure
If that old door is junk, before it goes you may want to cut the top frame off as sections may come in handy on the "T" (those double areas, smooth curve and reverse folds can be a pain to duplicate and IRCC you may be splitting the posts of the "T" to get sides to line up). On the other hand you may already have lots of those types of pieces from other projects and gotta be careful not to cross over to hoarder.
good call! ill toss the door into "storage" haha
Yeaaa buddy. Looking good
thanks buddy!
It's looking good!!!