Unboxing: Eibach Lift System Stage 1 and 2 for the Chevy Colorado / GMC Canyon
Вставка
- Опубліковано 26 сер 2024
- What's up guys, Team Eibach is back with another video!
In this video, Michael from our Engineering team shows us what's inside the Eibach PRO-TRUCK-LIFT System Stage 1 and 2 for the Chevrolet Colorado/GMC Canyon.
After the unboxing, a comparison is done to show the key differences between the two kits.
Visit eibach.com/us for more information.
My stage 1s came. In the mail today, no plastic straps.. the lid just on, Staples ripped. Off. I hope I have all the parts. :(
Stage 1 in a 2024 ranger how much lift will it give on each ring position? For different size motors you send different spring rates or one fits all? The ranger has different motor sizes in some parts of the world
These are for the USA spec Ranger
Eibach Wat size wheels do u recommend for the stage 1 kit and same question for the stage 2 kit
Nice
Yes
Very cool Kanye, very cool
Approximately how long does shipping take to Michigan? I am about to put in an order on the website but there is no estimated shipping time? It just says standard shipping.
It should be about a week or so with ground shipping, but we've notice there are some delays at the hubs.
@@EibachUSA Thank you for the reply. I ended up calling customer service in the morning & they said the same thing. I put in my order, & I am so excited for my new suspension! I got the complete kit with struts/shocks, springs, sway bars, & links. I figured it was designed to work together in harmony so I got the complete kit.
I love it
@@EibachUSA !!!!
Hey sugary how do u like the kit u bought ?
And wat size wheels did u go wit?
Will these fit 6 in lift? 08 Chevrolet
Can I have the part numbers for these kits
No decals included in my box. 😔
@eibach US do I need a block kit to be able to get to the 3 “ height ? Or will I able to adjust my height to 3 “ max without the blocks
For what vehicle? The blocks are for the rear and are typically a 1" increase for the rear. The max height for the front is what is listed for specific vehicle.
@@EibachUSA I figured it out. I would be fitting these on my 17’ z71 Colorado im pushing for 3” up front but I read that’s the max I can get and was pushing for the same in rear . But can only get 1.5 in rear . With a 1” block lift I can get close to that lol . I have one more question how do these perform on trail is there a lot of bounce on these or are they stiff enough to handle , how do they perform!?
If I put these on a 2nd gen will I get an extra lift?
They were not tested for the 2nd gen
Man, I had to order from a 3rd party and they left out the best part... the stickers so i can rep Eibach!
Hi
Question for you. I want to lift my colorado 4" and pair them with this eibach kit. What would you recommend i get to achieve a 4" overall lift kit?
Hi, our kit is only rated for up to 3" of lift.
@@EibachUSA which means I can only achieve a 3" lift with these shocks?
@@yessivasquez Yes, 3" is the maximum we recommend.
@@EibachUSA can I throw a spindle and lift blocks with the pro truck kit?
Hi do these have a left and right or it can go each side I just got mines
They can go either way.
@@EibachUSA thanks bro !
@@EibachUSA what do I need to measure mines to get a true 3 on the coilover ?
Pov:you freaking hand missed clicked or mouse or etc
Lol yea
Lol u right
Nice wrench, wish mine came with one. How can I get one?
....also, I've called Eibach already. Was told to get a wrench from the place I ordered the coilovers (Stage3). They don't have any, can't get any and told me to ask Eibach. I'm caught in a loop.
Thanks for your patience Erich! Forward your proof of purchase from Stage 3 to thallihan@eibach.com and copy sales@eibach.com. Be sure to leave your phone number / contact info so we can reach you and let you know we got it. We’ll get the replacement out the door right away.
@@mkrumm3 I'll give it a shot, thanks
@@erich_stolz As Mark said, follow the steps above. We'll take care of it first thing in the morning, thanks!
@@EibachUSA Sent.......sorry so long winded, it's a little more complicated that just a missing wrench.
Hola kien ganó el primer partido entré el Boer y Matagalpa
Does the rear shock go with the boot facing up ?
We usually put it with the boot side down.
@@EibachUSA Would it make a difference ? My mechanic put the boot side up, because oem shocks were up, and ive seen alot of other trucks having it up as well.
@@campos110486 No, just a preference kinda thing. You should be good, we've seen a few installed that way too.
@@EibachUSA sounds good. Thanks.
Ford Ranger 2020 Stage 2 product yet?
Unfortunately still out of stock.
eibach.com/us/1935/E86-35-048-01-22-FORD-Ranger-pro-truck-coilover-stage-2
@@EibachUSA roger that
Do you have those kind of shocks for a 2002 Toyota Tacoma Prerunner TRX
Not at the moment!
I didn't get the spanner wrench with mine either. If it worked I would like one but the springs are so stiff that I don't believe that you can adjust them without a spring compressor.
Give us a call at 800-507-2338 or email thallihan@eibach.com and we'll set you up with the wrench.
Just
当今世界处于战略空窗期
P9u