I bought this exact camera and use the same app, I use the free SD card it came with and chose to save to SD instead of subscribing to the cloud service, so far no issues.
@michaeljimenez239 I sure wished all would read your post. I have been trying to tell folks, that is the best way to use the camera and not use the cloud.
@@ester_22 I assume the seller you bought it from did not include one. You could have the same model but prob a different seller. Also what code are you referring too?
that camera aint no good look at the fine print folks they keep all your data i advise you not to put it in your bedroom and the rates are high its bad very bad i got rid of all of mine theres other cameras that are better do the reseach people bad. bad bad this product
Start reading the instruction and the contract you might be surprised what you find out about it. You could end up being charged a bunch of money to use it and they get to keep your data
@Dale Gray, thanks for your comments. I have had my camera for a few months now and have not had any problems. I use it with my Wi-Fi disabled for access to camera. I don't turn my whole WiFi off, only access for the camera. The camera will record video outside my house and store on memory card. If I want to control or control the camera, I turn on Wi-Fi and turn it off when I don't care about controlling the position of cam view. I have had no charges or contact from the company about charges. No I do not sign up for cloud services. I would never do that as they have access to your info. My camera is safe for me the way I use it. I only have my camera monitoring the outside of my house, not my bedroom, bathroom or any of the private areas of inside my house. I think that is what most people are afraid of hackers viewing their privacy. The cloud is another place to say away from and you do not require it to use the camera. Hope my experience will help folks understand the range of uses and security you can use and have fun with this camera. It tracks cars going down the street and people walking. The fun camera I have owned.
You meet the Yi Lot app on your cell phone and link your Wi-Fi router to the app and camera. Once set up you can use it without Wi-Fi to capture video and view video from card placed in computer.
Sorry, what dousit mean and require to 'CREATE AN ACCOUNT',(to get it straight). , same for 'file read/write? (a req. on my app.) (my cam. has no real manual)
There is an app that is required to work with the camera. All apps need to create an account. That does not mean a credit card is needed. You need to create a user name and password. If you have not worked with creating an app account, get someone to help you.
@@samowens44 I don't even come to the step to 'create' anything. What is to do? Insert an SD? which reaction to come? What to apply what to switch, when? SAY IT! sadly spoken I have no idea about webspeak, and no one with a brains around. and only a few icons for manual. The app writes four requirements:web, files, location and one,...
@jamesbronson2247, yes you can mount upside down and the video will be upside down, but, you have an option on the the main screen of the App upper right hand side to turn the video over 180 degrees. I use this option all the time.
5:30 when you sign up do you have to put your router password into the app so the cameras have access to the wifi? How does that part work? Is that the software password? Or do you have a original password for the app and put in the router password in a different area of the app?
@williamburdon6993, if you are buying cloud service for the Camera, you will have to pay somehow. If you are just using the camera without cloud, no credit card is need, tell them to buzz off.
These cameras are a scam. Don't buy these cameras. They let you use it for about 3 weeks, then shut it off. When you call costumer service, they tell you to continue to use this cam, you must sign up on their wifi which can get expensive!!! And in the contact you agreed to, States this company has the right to keep everything seen by these cameras. Do your research. Don't take my word. But believe you find what I said true
Mine has a good picture but alerts me when there is no motion but doesn’t alert me when there is motion. I get multiple alerts for no reason but when someone comes to my door, no alert. What gives?
I've just entered the realm of door cams. I liked how much I learned which is a lot. Thank you for all the little nuances, like the SD card going in at a slight angle. But this was a great learning exercise and I appreciate your doing it.
BUYER BEWARE! What you fail to mention in your video is that after a few days of free security service provided from the installed camera and app it will cease working until you purchase a costly subscriptin to continue using the camera. The company, according to its terms agreement in the contract, is allowed to keep all of the secured data, VIDEO and AUDIO, that the camera has captured. Knowing that would you install one of these cameras inside your home with the provided base?
Not only this, which is a major 'hidden' cost and security risk, but what's stopping some thief from just walking up and unscrewing the camera and stealing the whole camera. There's a reason other security camera companies secure the camera with security or hidden screws and bolts.
@@StellarJay77 That's true. Even if there wasn't any hidden costs or the socket is so high up that a thief would need a ladder to steal it. You would be losing that socket to a light bulb source which is why the socket was put there in the first place. That camera is a very poor substitute as a light source.
@@joejohnson2478 A camera is a poor substitution for a light source... Good thing this thing has a row of bright LED lights surrounding the gtont of the camera haha
You repeat several times that you have "signed up", but... at no time do you say WHAT you actually have signed up to ! That's quite interesting. So, here are people somewhere on the other side of the globe, who actually take control of a camera you just installed in YOUR home, and who ask you to... "sign up" into... something they don't tell you anything about ;-) Isn't such a deal kind of strange ? If I understand correctly, it looks like you need their server for your camera to work. And their server needs to know about you -- but you don't know anything about their server ;-) If that is the way it works, what data do they collect about you camera ? How do they use it ? What would happen to your camera if that company suddenly went down ? Or... have I completely missed the point of the "signup' ?
@dlaloux8491 sorry if you did not understand about "sign up", let me explain in a little more detail. Now viewing the video again, at the point I open the instruction booklet, I say we need to down load the App. That is the key thing that tells you that the camera is controlled by an App. All Apps, you have to create an account, that is called Sign up. Once you follow the button for Sign up, you need to create a user name and password so only you can access the App. Once you Sign up, latter you will "Sign In" to the app. You will use the user name and Password you just created. I point the sign up because you can not sign in until you have signed up for the App. This was supposed to be my way of not letting you get confused and try to sign in before signing up. Looks like I created a bigger misunderstanding for you, sorry. You are signing up for the App. All Apps work this way and no this is not a place on the other side of the world. You access the app from you cell phone so the app is Ok. Now if you do not know how to download the App, we have a lot more to talk about, let me know and I will explain that in detail.
To all, this camera is a piece of junk. Oh you get live view as long as your on their app watching and oh yeah the joke of an alert wont show any video. You have to pay minimum a $100 a year to actually be able to record anything and the camera is useless outdoors. No dampness no dust this camera cant handle it. This camera is junk. Just a way to get your money.
So far after a month working fine. I did delete the cam from the app and reset the cam back to factory settings by pushing the reset button next to memory card. A little hole is reset. I reloaded the whole camera and connected back to app and Wi-Fi. I did a video of that and it is on my UA-cam channel. So you can do it if things don’t seem right.
It did wierd things to my WiFi during set up. Only option for a Web cloud is Chinese, don't get naked in front of it... Not Private! Not water proof. I took it apart for parts, uses cheap 24BYJ48 steppers that won't last a week. Not Recommended.
Thanks for your input. I did not have problems with my unit, you could return a product you are no satisfied. Working with different Wi-Fi can present problems with a lot of products.
I saw another video where a guy had a similar unit that after a few days it cut off from his Wi-Fi and he had to buy a subscription to keep it working. Had to agree to their terms and he said to read the whole thing because he found out they can keep your data. I hope this one doesn't do this to you.
The video sett can be set to record all the time or only when motion is detected. I set mine to all the time. When I want to see video for a certain time period, I pull the memory card and look for the time period. To move through video quickly, just click on play cursor for video and drag at a faster speed than regular play. Amazing how fast you can look at 4 hours of video like that. Good luck. Use the Wi-Fi connection when it is just watching your house and not you.
I have the similar camera model, compatible with Tuya and Smart Life app. I have noticed, as you can observ in the video, that the camera can be moved with PTZ controls in pan and tilt. But, in the movement sensor mode, only moves in pan looking for the object or person that is moving in front of it, with no tilt movement. This is a firmware issue, because my Fuers Tuya compatible camera does it and in search movement mode, moves pan & tilt. Do you know if there is a firmware update that solves this issue?
In the upper right of camera view, click on the little gear symble. That is the settings tab. Look for Motion detection and click it on. You can set low to high sensor. I go for medium.
@@samowens44 I appreciate your immediate responsive instruction, it worked. Thank you so much, I know how much time and effort it takes to make videos and your video has great content, clear concise instructions with information posted within your video. I'm also looking up videos on how to install the socket, I love the way you attached the socket to an extension cord. Best wishes in your continued help to the public.
I assume every wifi cam has similar or the same features and handling /manual May you please explain about requirements .. and setting differences, the signals' way in the web system? I have HD IOT cam with USB., ROUTER or NET optionally, at this time.
After trying every possible option to connect to the camera, after listening to the lady screaming at me to hold my phone steady 15-20 cm away from camera to get QR code and never getting one... after many other obstacles, I used the reset button and gently placed this piece of trash in the garbage bag. At least this one wasn't expensive....
A rip-off the subscription is very expensive it only works for 2 weeks then it’s lights out until U pay and they keep all ur data as in agreement so keep it out of ur bedroom or living room unless U want to have Ur data out for everyone to C. I wouldn’t advise getting this thing
All mine kept saying from power on is...looking for connection. No matter what I did. Just kept saying that. After a couple of hours I threw it in the trash.
Continuing. Can't get past Register. Try to set up again and the chime doesn't play to start the setup again. The unit dies. The BCCA....................... tag never comes back.
@johnmann5232 I do cover showing memory card insertion. It is in video title Light Bulb Camera questions and answers. On my UA-cam channel. Search @samowens for my UA-cam.
Sam, you are great! I was stressed about these cameras. I purchased four of them! I have struggled to hook them up with no success but now I will use your video. Thank you. The seller I used does NOT issue refunds, that also added to my stress. I wonder if I can use the led light more often than not with the camera? Maybe press the light button like you showed and leave it on? These little cameras are taking up a spot for an outside light or flood light at our house so light is needed. I bet the led light comes on when there is motion but that is not all the time. You are the best source of info on these cameras on the web.
@Andre Richison thanks for comment. The light can be turned on I don’t know how long it will stay on, have not used it that way. Try it. It does not come on wit motion detection.
Any idea if this will work during Canadian winter ? If you want to access your recorded video remotely do you have to pay monthly fees for cloud access ? Thank's Sam, good job.
@@eleanormassaro5195 the memory card is the microSDXC. They are most popular for cameras. I use a 64 GB size. Also, if anything happens,there is no fixing the cam. Just get another. They are around $30.
@Frankreynolds7957, first, all cameras, should have a OR code on the base of the camera. If you do not have one, there is no way I know to link the camera to the app. The App is Yi Lot Good Luck. When you find the App, you will follow instruction in app, at one point it will ask access to your camera, say yes, then it will tell you to point your phone at the camera with the view of your camera, look for the QR code on camera and let phone camera see it. You will hear some beeps and connection is made. Just that easy, then follow rest of App directions.
@eddielai8831, this Lightbulb Camera is very popular because it can be powered from a light socket. No special wiring. It can also be manually turned for an angle of capture without WiFi and the App for the folks are afraid of being hacked. Eddie you should look at some of my other video about the camera on my youtube camera. I have about 4 or 5 that cover the secrets, the memory card and operation. I discovered more things as time goes on and published what I found. Enjoy the many options of your camera.
@brucequintana6619, yes, it does seem that the camera does not want to easily capture code. I found, move around to different lighting conditions, then you move the camera in and out twisting as you move in in and out. It may take several attempts, but you will get it soon, just try other areas, too much light I found causes trouble. Good luck, I know you will get it now! I am with you!!
@@samowens44 cloud or not, it's open to the net. Having a backdoor into the system isn't difficult. ANY camera or mic that can be hacked remotely if it's net ready. Private or public network.
@@irishhandyman2009 you should use cameras to view out from your home. Don’t use in personal space. Your smart phone, computer, are all with cameras. They are far more susceptible to hacking.
I am sorry, that is like asking me your car does not start and you have a KIA! I just can not begin to know how to help you. Watch my video and tell me a area that fails or something that I can give you information from that point. Good luck, I really would like to help.
I did not watch the entire video...BUT...beware that if you agree with the terms of usage of the camera mfg, you allow them to keep and use all the footage captured by the camera and all of your personal data. Do you really want that?
That wiring is the part I was hoping to see and you skipped it! LOL! Someone said you could hook it up to a battery as well if you didn't want to mess with your house electric wiring. Have you tried that? I want to hook another one up but don't have any more light sockets available. I thought I could try the wiring bit...but I don't know exactly how to go about that. I know you have to turn the circuit breaker off tho! ;o)
@chrinamint here is a simple answer to your need for a light socket that you can mount and cord and plug are attached. The socket base type is called E26. You can search for other types of sockets and pick what works. Here is link to one I suggest on Amazon. amzn.to/3JBPMly
@@samowens44 they sent one with me with each of my light bulb cameras that I bought but there were no instructions on how to use that part. The little instruction thing only talked about setting the camera up with the app and everything. All these people that are splitting wires and hooking them on there I don't know about that kind of stuff.
@graftedinforever. Turn the bottom part of cam to position you want to zero to. Hold the part that goes into base. You can also move cam up or down same way.
@Just Vlog Everythiing, yes, with memory card in computer, delete away. I do it all the time. The camera will write over the oldest files when the card fills up from recording, so you don't have to delete.
THANK YOU! QUESTION WHEN I PLUG MY CAMERA IN IT SCANS AROUND THEN ASK ME TO PLEASE CONFIGURE THE NET WORK. I KNOW JUST ABOUT NOUGH ABOUT THIS KIND OF THING TO KNOW I KNOW NOTHING AT ALL. HELP PLEASE!
20e56, it is hard to help you as there are so many things that need to be checked. Let me start by saying you have to follow the instruction in the user manual for setting up the camera. One is you have to connect the camera to the app. Then you have to connect the app and camera to your wifi network. Your cell phone has to be on the same network. You have to set your phone to your wifi router in the settings. If you don't do this, you will be on the cellular network and you will not be able to control the camera. The instruction walk you through downloading the app then you have to follow what it tells you. One part is it says to point your phone up to the camera, well the app hooks into your camera and sets it to record the QR code that will be present in your phone. If you did not do all this, then get some help as I would never be able to walk you through it with messages. This all requires a good knowledge of working with apps and connecting to a network. Good luck.
Did you watch my video, I really show you just how to do all of what I told you. You should watch again and follow the instruction as I am doing in the video. This is the only way you are going to get this to work.
THANK YOU SO MUCH FOR YOUR VIDEOS. I DID FINALLY GET IT TO WORK. MY COMPUTER WAS TO OLD SO I HAD TO GET IT ON MY NEWER IPAD. AND I DIDN'T HAVE A SMART PHONE.
Subscription is too expensive! They say that you don't have to get Subscription, but then almost force you to get the Subscription to keep the service.
Yes, it says in the description of product that it does not work with 5G. When you get a product that uses wifi, you need to always check if it will work on 5g now that 5g is available. Check this on any product you get in the future.
Let me know what you want to know. I will be glad to make another video to cover you needs. I have had 2500 view for my video with no comment of waste of time.
Don’t take over, like wiring the bulb socket, more than I minute. Use your instruction’s sheet and be precise. Go over the steps in order, don’t jump around. My instruction sheet is so pale I can’t read them. I’m sure other folks may have the same problem. Make sure, when you’re showing something on your phone screen, that the camera picks that up and the observer can see it plainly. I’ve perused other folk’s instructions and with some adjustments your’s could be the best. Send me a notice when, if, you publish it. Thanks
@@macgregorxmagpie6279 I agree with you most of your statements about my video. I have gone back and edited out the long detailed demonstration of wiring the light socket. I gear my video for the people that know little about using tools and especially wiring 120 volt A/C. I will let people get help with that, it is really not needed to explain the camera. The problem I had with making a video demonstrating all the steps as they were written, is some were out of sequence. Also, I was loading App and performing all the steps for the first time. I had not done a run through before the video. You saw me learning as I went and you were looking over my shoulder. I did not have a camera person viewing how the phone and material held up could be viewed. I got to see all of it after I completed the video. This was a one shot video with editing done to remove areas that did not need to be shown. To edit or remake sections would meant, I have to delete the app, reset the camera back to factory settings then set up the work area in the proper order again to remake the whole video. Apps and the setup of a device is a very difficult thing to video as most times you have to go back as something does not work or you Wi-Fi is in a low data mode and a million other reason. The Lightbulb camera instruction were hard to read and out of sequence as I tried to follow them. I think it is the hardest thing to video and have it to come out great. I feel that I am helping some folks that don't even know how to begin to work with a project like this and gain a little confidence to try after watching my video and as I attempt to explain the steps. The main things I try to show and demonstrate is, use QR code to read and download App. The instructions show you must connect the lightbulb to the App first and create the account and name camera. The next part is you must connect the App to you home Wi-Fi. That is you have to use the Wi-Fi password of home Wi-Fi for that part. Once that is complete you are ready to communicate with the light bulb by way of the App and your Wi-Fi. This is true with all apps, they all have be be setup just like this. A person that has setup apps and devices will be able to do it will little problems. Wi-Fi signal causes most problems. You need to have the Bulb near the Wi-Fi for setup. forgot, there is one step in there that you hold your cell phone up to the camera and let the camera read a QR code that the app places on the screen to make final connection. The instruction do tell all of this, but takes a magnifying glass to read it. Once you are connected then you need to go to settings on the app for camera to set up recording times and a whole bunch of other items to fine tune how you want the camera to perform. I think it is a fun thing to play with. Anyway that is why the video came out as it did and I can't change it as I explained.
@@macgregorxmagpie6279 it’s ridiculous how small the print is on the instruction manual. I can’t even read it with my reader glasses. You need a darned magnifying glass!
This camera cannot be connected to a fast WiFi like fiber optic or 5g only to 2.4G WiFi total waste of money and if you buy more than one the app don’t allow you to see more than one video unless you buy a very expensive cloud subscription from them that’s where the rip off comes in😡
Me abrieron por 15 minutos y se desconectaron, las cámaras están en redes guardadas, cómo las regreso a la principal de wifi, porque ya no me quieren abrir
there is a small catch with chinese cameras if you have to have an account for the wifi to work. if you have an account, they can have access to your wifi. and that you probably have to update your account and that costs money. check out this clip. ua-cam.com/video/Cpm6sFooFxs/v-deo.html
This is a free bulb cam system. You just pay shipping, BUT THEY DON'T TELL YOU THAT THEY AUTOMATICALLY SIGN YOU UP FOR A MONTHLY SUBSCRIPTION, AND CHARGE YOU $19.98.. which you can cancel. PAY ATTENTION!!!! THIS IS A RIPOFF!!!!!!! READ MY OTHER COMMENT...
I did not encounter this with my camera. You are offered to buy cloud service, but not required. I believe there are many Light Bulb companies selling these type camera. Some companies may be doing this, I do not know. My camera link on Amazon is showing products is unavailable. Looks like my video may have sold out their stock. It may come back, go to the company name and see if they have another line of the Light Bulb Camera. Company name is Ashipher on Amazon.
You got the wrong Light Bulb Camera. When you shop for cameras, look for the features in the description and see what level of memory card, There is no reset key. The reset is a small hole and you use a paper clip to stick in the hold and you fell a click when the button is pushed. All devices have a reset and a memory card, it is the only way you can start over if something goes wrong.
@samowens44 I got to the qr code and it read it the first time once I backed my phone up from the camera. But it still won't connect to my wifi and I have it set to 2.4Ghz.
@@williamswindle5445 you need to have the camera very near the Wi-Fi router. If you have it mounted where it going to live, there may not be enough signal. Instructions tell you to setup next to Wi-Fi. Then you try to find a spot that works or you move the router or get a Wi-Fi extender.
No there are no demands for subscriptions or even the cloud service. I have had mine since July and I just use it with no demands with anything. I don't know where these hearings are coming from.
Hi Mr. Sam, I have a question? I'm looking at your page Trying to install the camera light bulb. Upon following your steps as I scan the QR Code it's coming up in Chinese language. How do I change the language to English can you give me a little assistance? I'm not sure what state that you're located in I'm in New Jersey and I wanted to know how do I change the setting ? If you're able to get back to me I'm trying to install at the present moment. My time right now is 8:52 PM I'm not sure of the difference in time zone. ? Or if anybody else on Mr. Sam's page know how to change the setting upon me trying to install camera light bulb which is what hes advertising I will greatly appreciate any type of help or feedback
I got my light bulb camera 2 months ago with a 512gb SD card & only 19% has been stored on it. It has stopped recording. Shouldn't it still keep recording video or have I got to subscribe to the cloud?
Sam, I’m having problems making my camera. It doesn’t have a code on the camera or connect to the camera. If you understand what I’m saying I need help.
@Johnniemoore8419, I know if you are not familiar with setting up devices it can be a challenge. I have several video that explain the operation and setup of the Light Bulb Camera. Here is my playlist of all the video I created to help folks like you that have problems. ua-cam.com/play/PL-ycvkaR8LuutTsXCDRt-ih6zGMg1G35U.html&jct=aVsTBhWKs03zfegdGoIezl6LDAdSLQ
Yes, but first you must use wifi to set the camera up then you can disconnect and set to record all the time. You can not control the movement without wifi. You can move the camera by hand if you want to change the view.
I had to buy "cloud" storage for both my bulb camera's at 14.99 a month. It will let you connect up to 5 camera's. I've got them going on the inside of my house for the set up process---but I live in Iowa and right now our temps are at 0...Can I use this still? I have a hanging down type of back porch light that's covered...just don't know about the temps and there is no information.
@dellathoma5671, You are not required to buy Cloud Storage, it just gives you more video viewing options. Now, the camera mounted on your porch and next to the house gives the area a much higher temp due to the heat from you home. I found by searching internet the range is 0 C which is 32 f to 113 f. The cam is under a porch and next to house, this is a warmer place than way out from house. The heat in your house will put the outside of your house at a higher temp. Put a thermometer near the light and see what the temp really is for the Cam. Good luck.
I have tried numerous times connecting this camera, mine I think is a dud ones, it does not move, does not tilt but makes the sounds and the lights flashes, had to delete and download the apps a few times and enter the id, to no avail 🤔, once I have put in details of wifi as such, tries to connect but has to go to register and I tried to tap, it says invalid 🤔🤔 I thought once you download the app it will tell you to register but it did not, what am I doing wrong 😑😑🤔🤔
I believe it's a scam company. I ordered some myself and trying to get a refund with no avail. They don't answer email or phone. So I'm reporting them as a scam to my credit card company!
Most cameras like this do not come with memory card. The code you need to connect app to camera is QR code on base of cam. In the app instructions you are directed to point cell phone cam toward QR code.
The bulb (in all pictures) is always pointed to use it downward. Will it also work ok in a socket that points up but has a cover over the socket. House outside lights. What does one miss by not taking the subscription?
You can mount the cam up or down. In the main view screen on app is a tilt 180 degree correction control. Upper right hand area. The cloud subscription gives more video viewing options.
@AbrarShariffMohammed, I have stated the app many times in all of my videos. I will not answer questions that the answer is clearly stated in my video. You must view my video and watch all the way thru. I cover the most detail of anyone about the Light Bulb Camera. Look at all of my video about the cam on my youtube channel. All of the answers are there to see and hear. Sorry, I get a lot of these questions, I am now just referring to my video.
@Donald Fontenot look at my other video Light Bulb Camera App installation, wifi connection and operation procedure ua-cam.com/video/Gcx1izAFWoM/v-deo.html I show details a little better. You have to link your phone by pointing the wrong code to the camera and move it a back and forth at the cam.
I just got on from Walmart the other day for $23.00 I got one for my front porch Is it anyway to make the light brighter. It is so dim. I change the lighting to color and that didn't work. It's dim and at night you can't really see anything when you go outside or on when you check your phone through the camera If I can't get the light any brighter I was thinking just drill it like you did, and put it next to my porch light, but then I would need some kind of power for it to work outside. Any suggestions would be appreciated
@MLynette Pinky, I hope you are just being funny or if you are serious, I am going to explain the Light Bulb Camera features. I primary feature is to capture video and can track motion when motion feature is set in the settings. It has inferred lighting for night video capture. It does have a bright light that you can activate to light up the area, or have it to come on automatic is an alert is triggered. The light I featured may be different than the one you got from Walmart, mine does not have any colored light settings. Anyway, it is not the correct product if you want to use it as a night light for your front porch. I suggest you take it back and get a regular light bulb to use for proper lighting that you state you want. Thanks for commenting.
I bought this exact camera and use the same app, I use the free SD card it came with and chose to save to SD instead of subscribing to the cloud service, so far no issues.
@michaeljimenez239 I sure wished all would read your post. I have been trying to tell folks, that is the best way to use the camera and not use the cloud.
Mine didn't come with SD card. And mine doesn't have the code in it.
@@ester_22 I assume the seller you bought it from did not include one. You could have the same model but prob a different seller. Also what code are you referring too?
Ty appreciate ya
Does the company see everything in your house also through the app?
that camera aint no good look at the fine print folks they keep all your data i advise you not to put it in your bedroom and the rates are high its bad very bad i got rid of all of mine theres other cameras that are better do the reseach people bad. bad bad this product
Use an SD card and don’t use their cloud.
Thanks bc they make it appear so good. ✅
Yes, they keep your data but only if you get the subscription. To avoid that just a an SD card
I’ve heard it cuts the app function after trial and it only works again with a subscription. So it’s not about using their cloud.
The best solution is to stay out of it.
Start reading the instruction and the contract you might be surprised what you find out about it. You could end up being charged a bunch of money to use it and they get to keep your data
@Dale Gray, thanks for your comments. I have had my camera for a few months now and have not had any problems. I use it with my Wi-Fi disabled for access to camera. I don't turn my whole WiFi off, only access for the camera. The camera will record video outside my house and store on memory card. If I want to control or control the camera, I turn on Wi-Fi and turn it off when I don't care about controlling the position of cam view. I have had no charges or contact from the company about charges. No I do not sign up for cloud services. I would never do that as they have access to your info. My camera is safe for me the way I use it. I only have my camera monitoring the outside of my house, not my bedroom, bathroom or any of the private areas of inside my house. I think that is what most people are afraid of hackers viewing their privacy. The cloud is another place to say away from and you do not require it to use the camera. Hope my experience will help folks understand the range of uses and security you can use and have fun with this camera. It tracks cars going down the street and people walking. The fun camera I have owned.
we run on our own FOG network no access to the cloud is needed.
9;56@@samowens44
Yes
Ok@@AlanDeRossett
Do you need wi fi at home to use this or does it pair to. Phone
You meet the Yi Lot app on your cell phone and link your Wi-Fi router to the app and camera. Once set up you can use it without Wi-Fi to capture video and view video from card placed in computer.
Sorry, what dousit mean and require to 'CREATE AN ACCOUNT',(to get it straight).
, same for 'file read/write? (a req. on my app.)
(my cam. has no real manual)
There is an app that is required to work with the camera. All apps need to create an account. That does not mean a credit card is needed. You need to create a user name and password. If you have not worked with creating an app account, get someone to help you.
@@samowens44 I don't even come to the step to 'create' anything. What is to do? Insert an SD? which reaction to come? What to apply what to switch, when? SAY IT! sadly spoken I have no idea about webspeak, and no one with a brains around. and only a few icons for manual. The app writes four requirements:web, files, location and one,...
There’s nothing to lock it in place u can remove it like a light bulb, wats the point?
Can you mount the device pointing up instead of down. My porch light bulb installs with the bulb pointing up, not down.
@jamesbronson2247, yes you can mount upside down and the video will be upside down, but, you have an option on the the main screen of the App upper right hand side to turn the video over 180 degrees. I use this option all the time.
@@samowens44 thank you! Happy Thanksgiving
what brand is this?
Go to my description for my video and there is a link to the product.
5:30 when you sign up do you have to put your router password into the app so the cameras have access to the wifi? How does that part work? Is that the software password? Or do you have a original password for the app and put in the router password in a different area of the app?
@Za Z. You are using the Wi-Fi password for your router to sign the app into your router.
They want my credit card info, Is there any way around that? I am not giving it to them or anyone else
@williamburdon6993, if you are buying cloud service for the Camera, you will have to pay somehow. If you are just using the camera without cloud, no credit card is need, tell them to buzz off.
These cameras are a scam. Don't buy these cameras. They let you use it for about 3 weeks, then shut it off. When you call costumer service, they tell you to continue to use this cam, you must sign up on their wifi which can get expensive!!!
And in the contact you agreed to, States this company has the right to keep everything seen by these cameras. Do your research. Don't take my word. But believe you find what I said true
Mine has a good picture but alerts me when there is no motion but doesn’t alert me when there is motion. I get multiple alerts for no reason but when someone comes to my door, no alert. What gives?
Go to settings and look at sensitivity setting. Change the settings and test for results.
@@samowens44 Thanks so much for responding so quickly! I did adjust the settings from high, medium and low. No change noticed 🙁
Turn motion detection off, wait a few min then turn back on. If this does not work you could try resetting your camera and set up again.
I've just entered the realm of door cams. I liked how much I learned which is a lot. Thank you for all the little nuances, like the SD card going in at a slight angle. But this was a great learning exercise and I appreciate your doing it.
Thanks Timothy, I appreciate your comments and it is nice to know I was able to present the video in a way you could follow and understand the steps.
They gonna be bored if they watch me! 😂😂
I agree with you on that. The words ARE TO SMALL.
BUYER BEWARE!
What you fail to mention in your video is that after a few days of free security service provided from the installed camera and app it will cease working until you purchase a costly subscriptin to continue using the camera. The company, according to its terms agreement in the contract, is allowed to keep all of the secured data, VIDEO and AUDIO, that the camera has captured. Knowing that would you install one of these cameras inside your home with the provided base?
Not only this, which is a major 'hidden' cost and security risk, but what's stopping some thief from just walking up and unscrewing the camera and stealing the whole camera. There's a reason other security camera companies secure the camera with security or hidden screws and bolts.
@@StellarJay77 That's true also!
@@StellarJay77 That's true. Even if there wasn't any hidden costs or the socket is so high up that a thief would need a ladder to steal it. You would be losing that socket to a light bulb source which is why the socket was put there in the first place. That camera is a very poor substitute as a light source.
@@joejohnson2478 A camera is a poor substitution for a light source... Good thing this thing has a row of bright LED lights surrounding the gtont of the camera haha
Not true with our 10 cameras but we do not connect to the cloud and use it on our own Fog network. no subscriptions are needed.
You repeat several times that you have "signed up", but... at no time do you say WHAT you actually have signed up to ! That's quite interesting. So, here are people somewhere on the other side of the globe, who actually take control of a camera you just installed in YOUR home, and who ask you to... "sign up" into... something they don't tell you anything about ;-)
Isn't such a deal kind of strange ?
If I understand correctly, it looks like you need their server for your camera to work. And their server needs to know about you -- but you don't know anything about their server ;-)
If that is the way it works, what data do they collect about you camera ? How do they use it ? What would happen to your camera if that company suddenly went down ?
Or... have I completely missed the point of the "signup' ?
@dlaloux8491 sorry if you did not understand about "sign up", let me explain in a little more detail. Now viewing the video again, at the point I open the instruction booklet, I say we need to down load the App. That is the key thing that tells you that the camera is controlled by an App. All Apps, you have to create an account, that is called Sign up. Once you follow the button for Sign up, you need to create a user name and password so only you can access the App. Once you Sign up, latter you will "Sign In" to the app. You will use the user name and Password you just created. I point the sign up because you can not sign in until you have signed up for the App. This was supposed to be my way of not letting you get confused and try to sign in before signing up. Looks like I created a bigger misunderstanding for you, sorry. You are signing up for the App. All Apps work this way and no this is not a place on the other side of the world. You access the app from you cell phone so the app is Ok. Now if you do not know how to download the App, we have a lot more to talk about, let me know and I will explain that in detail.
@@samowens44 - So I'd also be thankful to learn aabout...!
They don't tell that there's an expensive connect charge to keep it up and working..
On the Light Socket camera? My emails bounced back as a fake site.
To all, this camera is a piece of junk. Oh you get live view as long as your on their app watching and oh yeah the joke of an alert wont show any video. You have to pay minimum a $100 a year to actually be able to record anything and the camera is useless outdoors. No dampness no dust this camera cant handle it. This camera is junk. Just a way to get your money.
Thank you for this video - I am wondering if you will do a follow up in a few months to let folks know if it lasted outside of the warrantee period?
So far after a month working fine. I did delete the cam from the app and reset the cam back to factory settings by pushing the reset button next to memory card. A little hole is reset. I reloaded the whole camera and connected back to app and Wi-Fi. I did a video of that and it is on my UA-cam channel. So you can do it if things don’t seem right.
And also, I’m curious if the light part burns out like a normal lightbulb would, how do you replace that on this particular lightbulb?
If a memory card is installed a subscription will still be necessary to keep it working?
It did wierd things to my WiFi during set up. Only option for a Web cloud is Chinese, don't get naked in front of it... Not Private! Not water proof. I took it apart for parts, uses cheap 24BYJ48 steppers that won't last a week. Not Recommended.
Thanks for your input. I did not have problems with my unit, you could return a product you are no satisfied. Working with different Wi-Fi can present problems with a lot of products.
I saw another video where a guy had a similar unit that after a few days it cut off from his Wi-Fi and he had to buy a subscription to keep it working. Had to agree to their terms and he said to read the whole thing because he found out they can keep your data. I hope this one doesn't do this to you.
I have had mine since July and have used it with motion detection without Wi-Fi connection. No cloud just the cam. Have not had anything to happen.
@@samowens44 Ok, that's good to hear. Maybe I will get one of that brand then.
Some are honest and some are crooks. Thanks for your reply.
@@samowens44 That item is no longer available I just found out. It was cheap too.
Only $19. 😒
The video sett can be set to record all the time or only when motion is detected. I set mine to all the time. When I want to see video for a certain time period, I pull the memory card and look for the time period. To move through video quickly, just click on play cursor for video and drag at a faster speed than regular play. Amazing how fast you can look at 4 hours of video like that. Good luck. Use the Wi-Fi connection when it is just watching your house and not you.
@@samowens44 It's no longer available on Amazon.
I have the similar camera model, compatible with Tuya and Smart Life app. I have noticed, as you can observ in the video, that the camera can be moved with PTZ controls in pan and tilt. But, in the movement sensor mode, only moves in pan looking for the object or person that is moving in front of it, with no tilt movement. This is a firmware issue, because my Fuers Tuya compatible camera does it and in search movement mode, moves pan & tilt. Do you know if there is a firmware update that solves this issue?
Thank you for the very helpful and detailed video instructions. How do you set up the tracking?
In the upper right of camera view, click on the little gear symble. That is the settings tab. Look for Motion detection and click it on. You can set low to high sensor. I go for medium.
@@samowens44 I appreciate your immediate responsive instruction, it worked. Thank you so much, I know how much time and effort it takes to make videos and your video has great content, clear concise instructions with information posted within your video. I'm also looking up videos on how to install the socket, I love the way you attached the socket to an extension cord. Best wishes in your continued help to the public.
I assume every wifi cam has similar or the same features and handling /manual
May you please explain about requirements
.. and setting differences, the signals' way in the web system?
I have HD IOT cam with USB., ROUTER or NET optionally, at this time.
I emailed the address provided by the Company TWICE and it immediately bounced back as FAKE. Not a good sign. I’ll try calling tomorrow.
After trying every possible option to connect to the camera, after listening to the lady screaming at me to hold my phone steady 15-20 cm away from camera to get QR code and never getting one... after many other obstacles, I used the reset button and gently placed this piece of trash in the garbage bag.
At least this one wasn't expensive....
A rip-off the subscription is very expensive it only works for 2 weeks then it’s lights out until U pay and they keep all ur data as in agreement so keep it out of ur bedroom or living room unless U want to have Ur data out for everyone to C. I wouldn’t advise getting this thing
All mine kept saying from power on is...looking for connection. No matter what I did. Just kept saying that. After a couple of hours I threw it in the trash.
Continuing. Can't get past Register. Try to set up again and the chime doesn't play to start the setup again. The unit dies. The BCCA.......................
tag never comes back.
Thomas Cynthia Lopez Deborah Smith Daniel
Cams today won't work on anything but a cell phone. This is crap. I'm not pleased.
Read more of the instruction in the package a hacker from across the world could be watching you !
I gave up on mine. I looked at what was supposed to be it’s “IUD” It wasn’t . So now it goes in the trash with two other ones.
You can put it in a lamp and go to the settings and flip the video .
I like this guyq
Acknowledge Uncle Sam, big help for us God bless .
@Doobie thanks for your comment.😀
I bought 2 and the motor doesn’t work! I want my money back! Pure garbage!
These cameras are the worst i bought 5 myself waste of money they break after 1 month and the keep youre data
Nice job on the demo of the unit. It would of been helpful to see how to put the sd card into the unit
@johnmann5232 I do cover showing memory card insertion. It is in video title Light Bulb Camera questions and answers. On my UA-cam channel. Search @samowens for my UA-cam.
My panorama camera motion detector does not work unless I use it manually. Thank you for letting me know that the SD card has a slight angle.
where did you get the SD and what size. the slot is too small for the ones that I have for my game cameras
What if i cant get verification code....it doesnt show on my mail
Thank you! Great video. It was very helpful!
Sam, you are great! I was stressed about these cameras. I purchased four of them! I have struggled to hook them up with no success but now I will use your video. Thank you. The seller I used does NOT issue refunds, that also added to my stress. I wonder if I can use the led light more often than not with the camera? Maybe press the light button like you showed and leave it on? These little cameras are taking up a spot for an outside light or flood light at our house so light is needed. I bet the led light comes on when there is motion but that is not all the time. You are the best source of info on these cameras on the web.
@Andre Richison thanks for comment. The light can be turned on I don’t know how long it will stay on, have not used it that way. Try it. It does not come on wit motion detection.
I got same camera but when I try to download app it says not available in my country
Your the 😊coolest explain now I’ll try thank u
Any idea if this will work during Canadian winter ? If you want to access your recorded video remotely do you have to pay monthly fees for cloud access ? Thank's Sam, good job.
I do not use the cloud. I just pull the memory card.
Also sir, what size SD card did you put in there. It looks smaller than the normal SD card that I’m used to working with
@@eleanormassaro5195 the memory card is the microSDXC. They are most popular for cameras. I use a 64 GB size. Also, if anything happens,there is no fixing the cam. Just get another. They are around $30.
@@eleanormassaro5195 Read my comment BUYER BEWARE as to why I'd avoid purchasing it.
American power is 110-120 does it work in220
My camera did not come with instructions. I do not have a QR code and can’t seem to find the app for my IPhone. Can anyone help me? Thank you.
@Frankreynolds7957, first, all cameras, should have a OR code on the base of the camera. If you do not have one, there is no way I know to link the camera to the app. The App is Yi Lot Good Luck. When you find the App, you will follow instruction in app, at one point it will ask access to your camera, say yes, then it will tell you to point your phone at the camera with the view of your camera, look for the QR code on camera and let phone camera see it. You will hear some beeps and connection is made. Just that easy, then follow rest of App directions.
Thanks Sam, my camera keeps saying SD card removed then inserted every 5 minuits , how do I solve this please ?
Try removing power. Or unscrew camera. The power up, should reboot. Make sure mem card is seated properly.
What is the App? I do not have the papers or the QR code. I was hoping you would tell me the app name. Oh well back to searching again
@teresacrockett7015 the app is Yi Lot
Does it work with 220 v
It will work on any voltage between 120 V to 240 Volts.
Thank you Sam, for making us aware of how to use this! Very helpful!
@eddielai8831, this Lightbulb Camera is very popular because it can be powered from a light socket. No special wiring. It can also be manually turned for an angle of capture without WiFi and the App for the folks are afraid of being hacked. Eddie you should look at some of my other video about the camera on my youtube camera. I have about 4 or 5 that cover the secrets, the memory card and operation. I discovered more things as time goes on and published what I found. Enjoy the many options of your camera.
This was not helpful
I do good until it comes to scanning the camera, and it doesn't work. I am trying to widen my zoom. Very frustrating.
@brucequintana6619, yes, it does seem that the camera does not want to easily capture code. I found, move around to different lighting conditions, then you move the camera in and out twisting as you move in in and out. It may take several attempts, but you will get it soon, just try other areas, too much light I found causes trouble. Good luck, I know you will get it now! I am with you!!
This is a catch there game is. To sell you cloud storage and get your info
Don’t sign up for cloud. You can use the memory card to store your video.
@@samowens44 cloud or not, it's open to the net. Having a backdoor into the system isn't difficult. ANY camera or mic that can be hacked remotely if it's net ready. Private or public network.
@@irishhandyman2009 you should use cameras to view out from your home. Don’t use in personal space. Your smart phone, computer, are all with cameras. They are far more susceptible to hacking.
My camera it set up. But will not work with the light sucket. Only work with the wall plug.Help
The light socket must have power. Test with light bulb.
I am trying to set up my camera using my android phone. None of the tutorials match. What do I do.
I am sorry, that is like asking me your car does not start and you have a KIA! I just can not begin to know how to help you. Watch my video and tell me a area that fails or something that I can give you information from that point. Good luck, I really would like to help.
I did not watch the entire video...BUT...beware that if you agree with the terms of usage of the camera mfg, you allow them to keep and use all the footage captured by the camera and all of your personal data. Do you really want that?
That wiring is the part I was hoping to see and you skipped it! LOL! Someone said you could hook it up to a battery as well if you didn't want to mess with your house electric wiring. Have you tried that? I want to hook another one up but don't have any more light sockets available. I thought I could try the wiring bit...but I don't know exactly how to go about that. I know you have to turn the circuit breaker off tho! ;o)
@chrinamint here is a simple answer to your need for a light socket that you can mount and cord and plug are attached. The socket base type is called E26. You can search for other types of sockets and pick what works. Here is link to one I suggest on Amazon. amzn.to/3JBPMly
@@samowens44 they sent one with me with each of my light bulb cameras that I bought but there were no instructions on how to use that part. The little instruction thing only talked about setting the camera up with the app and everything. All these people that are splitting wires and hooking them on there I don't know about that kind of stuff.
Just go to UA-cam. Com and search for how to wire a E26 light bulb socket. You will find what you are looking for.
How do I set the camera to "zero" so that "home" isn't with the camera facing the wall. I have it screwed I to my porch light socket.
@graftedinforever. Turn the bottom part of cam to position you want to zero to. Hold the part that goes into base. You can also move cam up or down same way.
@mbmv22 my Amazon storefront link is amazon.com/shop/samowens My youtube channel shortcut is @samowens44
The app allows reversing up or down of the camera
Yes, I did discover that after the video was made. I did place a notice in the description to indicate mounting up or down is ok.
Thank you.
Sir moton dectct alarm in it I don't know india
Great job!
Granpa will I be able to delete the footage stored in memory card from app or not?
@Just Vlog Everythiing, yes, with memory card in computer, delete away. I do it all the time. The camera will write over the oldest files when the card fills up from recording, so you don't have to delete.
THANK YOU! QUESTION WHEN I PLUG MY CAMERA IN IT SCANS AROUND THEN ASK ME TO PLEASE CONFIGURE THE NET WORK. I KNOW JUST ABOUT NOUGH ABOUT THIS KIND OF THING TO KNOW I KNOW NOTHING AT ALL. HELP PLEASE!
20e56, it is hard to help you as there are so many things that need to be checked. Let me start by saying you have to follow the instruction in the user manual for setting up the camera. One is you have to connect the camera to the app. Then you have to connect the app and camera to your wifi network. Your cell phone has to be on the same network. You have to set your phone to your wifi router in the settings. If you don't do this, you will be on the cellular network and you will not be able to control the camera. The instruction walk you through downloading the app then you have to follow what it tells you. One part is it says to point your phone up to the camera, well the app hooks into your camera and sets it to record the QR code that will be present in your phone. If you did not do all this, then get some help as I would never be able to walk you through it with messages. This all requires a good knowledge of working with apps and connecting to a network. Good luck.
Did you watch my video, I really show you just how to do all of what I told you. You should watch again and follow the instruction as I am doing in the video. This is the only way you are going to get this to work.
THANK YOU SO MUCH FOR YOUR VIDEOS. I DID FINALLY GET IT TO WORK. MY COMPUTER WAS TO OLD SO I HAD TO GET IT ON MY NEWER IPAD. AND I DIDN'T HAVE A SMART PHONE.
you forgot a couple tidbits friend;
requires a subscription
& the company keeps your data(vids) is in the TOS fine print
Does the camera have inbuilt battery incase of power outage or it works only when connected to electricity?
No they run off power
Light sockets outside front and back door there are I can't see anything
Call my cell phone
Subscription is too expensive! They say that you don't have to get Subscription, but then almost force you to get the Subscription to keep the service.
How do i get the camera to go to motion detector so it fallows people. I have to move mine my self
You need to go to settings to find motion detection and turn it on. At top right click on gear icon.
Thank you for answering my question
Can’t get mine to work 😡
I have a 5G Wifi , and will only work on a 2.4ghz. Have anyone else ran into that issue?
Yes, it says in the description of product that it does not work with 5G. When you get a product that uses wifi, you need to always check if it will work on 5g now that 5g is available. Check this on any product you get in the future.
@@samowens44 Thanks. They also said you can add it via HotSpot. I didn’t want to go through all that trouble, so I’ll be returning them.
What about 0425?
How do you pull up your cameras on The Ready Set where do I go get them back up there are in the footage where did it go
The info I got off this website was zero. It was such a waste of time.
Let me know what you want to know. I will be glad to make another video to cover you needs. I have had 2500 view for my video with no comment of waste of time.
Don’t take over, like wiring the bulb socket, more than I minute. Use your instruction’s sheet and be precise. Go over the steps in order, don’t jump around. My instruction sheet is so pale I can’t read them. I’m sure other folks may have the same problem. Make sure, when you’re showing something on your phone screen, that the camera picks that up and the observer can see it plainly. I’ve perused other folk’s instructions and with some adjustments your’s could be the best. Send me a notice when, if, you publish it. Thanks
@@macgregorxmagpie6279 I agree with you most of your statements about my video. I have gone back and edited out the long detailed demonstration of wiring the light socket. I gear my video for the people that know little about using tools and especially wiring 120 volt A/C. I will let people get help with that, it is really not needed to explain the camera. The problem I had with making a video demonstrating all the steps as they were written, is some were out of sequence. Also, I was loading App and performing all the steps for the first time. I had not done a run through before the video. You saw me learning as I went and you were looking over my shoulder. I did not have a camera person viewing how the phone and material held up could be viewed. I got to see all of it after I completed the video. This was a one shot video with editing done to remove areas that did not need to be shown. To edit or remake sections would meant, I have to delete the app, reset the camera back to factory settings then set up the work area in the proper order again to remake the whole video. Apps and the setup of a device is a very difficult thing to video as most times you have to go back as something does not work or you Wi-Fi is in a low data mode and a million other reason. The Lightbulb camera instruction were hard to read and out of sequence as I tried to follow them. I think it is the hardest thing to video and have it to come out great. I feel that I am helping some folks that don't even know how to begin to work with a project like this and gain a little confidence to try after watching my video and as I attempt to explain the steps. The main things I try to show and demonstrate is, use QR code to read and download App. The instructions show you must connect the lightbulb to the App first and create the account and name camera. The next part is you must connect the App to you home Wi-Fi. That is you have to use the Wi-Fi password of home Wi-Fi for that part. Once that is complete you are ready to communicate with the light bulb by way of the App and your Wi-Fi. This is true with all apps, they all have be be setup just like this. A person that has setup apps and devices will be able to do it will little problems. Wi-Fi signal causes most problems. You need to have the Bulb near the Wi-Fi for setup. forgot, there is one step in there that you hold your cell phone up to the camera and let the camera read a QR code that the app places on the screen to make final connection. The instruction do tell all of this, but takes a magnifying glass to read it. Once you are connected then you need to go to settings on the app for camera to set up recording times and a whole bunch of other items to fine tune how you want the camera to perform. I think it is a fun thing to play with. Anyway that is why the video came out as it did and I can't change it as I explained.
@@macgregorxmagpie6279 it’s ridiculous how small the print is on the instruction manual. I can’t even read it with my reader glasses. You need a darned magnifying glass!
This camera cannot be connected to a fast WiFi like fiber optic or 5g only to 2.4G WiFi total waste of money and if you buy more than one the app don’t allow you to see more than one video unless you buy a very expensive cloud subscription from them that’s where the rip off comes in😡
How do you turn on the camera to activate on motion?
It is done in the settings. You need to find the setting button and there you will find all the controls. My video really show this.
Me abrieron por 15 minutos y se desconectaron, las cámaras están en redes guardadas, cómo las regreso a la principal de wifi, porque ya no me quieren abrir
Mine isn't tracking
there is a small catch with chinese cameras if you have to have an account for the wifi to work. if you have an account, they can have access to your wifi. and that you probably have to update your account and that costs money. check out this clip. ua-cam.com/video/Cpm6sFooFxs/v-deo.html
Thank you
This is a free bulb cam system.
You just pay shipping, BUT THEY DON'T TELL YOU THAT THEY AUTOMATICALLY SIGN YOU UP FOR A MONTHLY SUBSCRIPTION, AND CHARGE
YOU $19.98.. which you can cancel. PAY ATTENTION!!!!
THIS IS A RIPOFF!!!!!!!
READ MY OTHER COMMENT...
I did not encounter this with my camera. You are offered to buy cloud service, but not required. I believe there are many Light Bulb companies selling these type camera. Some companies may be doing this, I do not know. My camera link on Amazon is showing products is unavailable. Looks like my video may have sold out their stock. It may come back, go to the company name and see if they have another line of the Light Bulb Camera. Company name is Ashipher on Amazon.
The camera bulb i have doesn't take any sd card and didn't come with a reset key. It won't pair to my internet or phone. 😡
You got the wrong Light Bulb Camera. When you shop for cameras, look for the features in the description and see what level of memory card, There is no reset key. The reset is a small hole and you use a paper clip to stick in the hold and you fell a click when the button is pushed. All devices have a reset and a memory card, it is the only way you can start over if something goes wrong.
@samowens44 I got to the qr code and it read it the first time once I backed my phone up from the camera. But it still won't connect to my wifi and I have it set to 2.4Ghz.
It was given to me so I thought I'd give it a try.
@@williamswindle5445 you need to have the camera very near the Wi-Fi router. If you have it mounted where it going to live, there may not be enough signal. Instructions tell you to setup next to Wi-Fi. Then you try to find a spot that works or you move the router or get a Wi-Fi extender.
Did it stop working unless you buy a subscription?
I've been hearing these stop unless you buy an expensive subscription
No there are no demands for subscriptions or even the cloud service. I have had mine since July and I just use it with no demands with anything. I don't know where these hearings are coming from.
Hi Mr. Sam, I have a question? I'm looking at your page Trying to install the camera light bulb. Upon following your steps as I scan the QR Code it's coming up in Chinese language. How do I change the language to English can you give me a little assistance? I'm not sure what state that you're located in I'm in New Jersey and I wanted to know how do I change the setting ? If you're able to get back to me I'm trying to install at the present moment. My time right now is 8:52 PM I'm not sure of the difference in time zone. ? Or if anybody else on Mr. Sam's page know how to change the setting upon me trying to install camera light bulb which is what hes advertising I will greatly appreciate any type of help or feedback
Just go to your App Store on your Phone and look up the Yi Lot App and download, should be in English.
Be aware that these type of cameras can be hacked or even turned off by someone using the same app you are.
I got my light bulb camera 2 months ago with a 512gb SD card & only 19% has been stored on it. It has stopped recording. Shouldn't it still keep recording video or have I got to subscribe to the cloud?
@jamesphelps1678 The light bulb camera WiFi outdoor supports a maximum of 128G Micro SD card
He made that seem way more complicated that it really is.....
I don't own a Iphone, will it work with a laptop??
No, it only works with the app on a smartphone. Sorry.
Thank you very much. :(@@samowens44
When my camera tracks motion, the gimbal can only move left and right, but not up and down. Any idea why?
@user-gn5ts7yb9t tracking right and left is the design of the camera, people move left and right and no need to track up and down.😀
Sam, I’m having problems making my camera. It doesn’t have a code on the camera or connect to the camera. If you understand what I’m saying I need help.
@Johnniemoore8419, I know if you are not familiar with setting up devices it can be a challenge. I have several video that explain the operation and setup of the Light Bulb Camera. Here is my playlist of all the video I created to help folks like you that have problems.
ua-cam.com/play/PL-ycvkaR8LuutTsXCDRt-ih6zGMg1G35U.html&jct=aVsTBhWKs03zfegdGoIezl6LDAdSLQ
Can the can work with out wifi
Yes, but first you must use wifi to set the camera up then you can disconnect and set to record all the time. You can not control the movement without wifi. You can move the camera by hand if you want to change the view.
I had to buy "cloud" storage for both my bulb camera's at 14.99 a month. It will let you connect up to 5 camera's. I've got them going on the inside of my house for the set up process---but I live in Iowa and right now our temps are at 0...Can I use this still? I have a hanging down type of back porch light that's covered...just don't know about the temps and there is no information.
@dellathoma5671, You are not required to buy Cloud Storage, it just gives you more video viewing options. Now, the camera mounted on your porch and next to the house gives the area a much higher temp due to the heat from you home. I found by searching internet the range is 0 C which is 32 f to 113 f. The cam is under a porch and next to house, this is a warmer place than way out from house. The heat in your house will put the outside of your house at a higher temp. Put a thermometer near the light and see what the temp really is for the Cam. Good luck.
I have tried numerous times connecting this camera, mine I think is a dud ones, it does not move, does not tilt but makes the sounds and the lights flashes, had to delete and download the apps a few times and enter the id, to no avail 🤔, once I have put in details of wifi as such, tries to connect but has to go to register and I tried to tap, it says invalid 🤔🤔 I thought once you download the app it will tell you to register but it did not, what am I doing wrong 😑😑🤔🤔
I believe it's a scam company. I ordered some myself and trying to get a refund with no avail. They don't answer email or phone. So I'm reporting them as a scam to my credit card company!
hello I can not associate my camera and my phone, how to proceed?
Mine didn't come with an SD card and doesn't have a number/code in it. Strange...
Most cameras like this do not come with memory card. The code you need to connect app to camera is QR code on base of cam. In the app instructions you are directed to point cell phone cam toward QR code.
Please can you do a video on .if you change password .what to do to connect the camera back online
Yes I will work on that. Thanks for comment.
The bulb (in all pictures) is always pointed to use it downward. Will it also work ok in a socket that points up but has a cover over the socket. House outside lights. What does one miss by not taking the subscription?
You can mount the cam up or down. In the main view screen on app is a tilt 180 degree correction control. Upper right hand area. The cloud subscription gives more video viewing options.
What app is it?
@AbrarShariffMohammed, I have stated the app many times in all of my videos. I will not answer questions that the answer is clearly stated in my video. You must view my video and watch all the way thru. I cover the most detail of anyone about the Light Bulb Camera. Look at all of my video about the cam on my youtube channel. All of the answers are there to see and hear. Sorry, I get a lot of these questions, I am now just referring to my video.
Come over here Chris. let me show you what a light bulb can do, wow that's on cunning
Awsome video my good men!!
this camera does not connect to my phone, and they DO NOT give refunds!!
@Donald Fontenot look at my other video Light Bulb Camera App installation, wifi connection and operation procedure
ua-cam.com/video/Gcx1izAFWoM/v-deo.html I show details a little better. You have to link your phone by pointing the wrong code to the camera and move it a back and forth at the cam.
I just got on from Walmart the other day for $23.00
I got one for my front porch
Is it anyway to make the light brighter.
It is so dim. I change the lighting to color and that didn't work.
It's dim and at night you can't really see anything when you go outside or on when you check your phone through the camera
If I can't get the light any brighter
I was thinking just drill it like you did,
and put it next to my porch light, but then I would need some kind of power for it to work outside.
Any suggestions would be appreciated
@MLynette Pinky, I hope you are just being funny or if you are serious, I am going to explain the Light Bulb Camera features. I primary feature is to capture video and can track motion when motion feature is set in the settings. It has inferred lighting for night video capture. It does have a bright light that you can activate to light up the area, or have it to come on automatic is an alert is triggered. The light I featured may be different than the one you got from Walmart, mine does not have any colored light settings. Anyway, it is not the correct product if you want to use it as a night light for your front porch. I suggest you take it back and get a regular light bulb to use for proper lighting that you state you want. Thanks for commenting.
Pinky do you have to pay any subscriptions?