Whirlpool Washer Calibration - How & Why
Вставка
- Опубліковано 2 жов 2024
- Under normal operation, it is suggested to calibrate your Whirlpool high efficiency machine every 30 days. This will ensure great operation of your machine’s cycles and preserve its longevity.
Affordable Appliances & Parts
🛠 Professionally Refurbished Machines
⚙️ New & Used Parts
🧺 Washer|Dryer|Stove|Oven|Fridge
💡 FREE Repair Advice
⏰ 11 to 6 Mon-Fri | 10-1 Sat
🛻 Delivery Available
🛎 1509 East Lincolnway in Valparaiso, IN
☎️ 219-465-6483
Find us on Facebook too!
We’ll be here when you need us!
You didn't have to do this but you did and have saved thousands of dollars for us middle class getting screwed. My washer said thank you. God bless America
We’ll be here when you need us! Thanks for watching! Stay tuned for an additional video on how to check the codes on your Whirlpool HE washer and clear them!
Matt it was the shift actuator wen I did the tachometer test the lights wasn’t chasing each other so I ordered the part from Amazon a $20 part easy fix now it works like brand new mahalo for all ur knowledge and videos it really helped me a lot🤙🙏
I’m glad it helped! Keep up the good work! But careful with those Rainforest parts. Fixing stuff twice sucks. I would recommend OEM.
I am so glad I found you! My husband did his research and we changed the suspension rods, and added for springs that it didn't come with, and my job was to figure out how to😊 and that's when I found you😂🥰🙏🙏 thank you so much
We are so glad you’re happy! Feel free to call us for any future help or parts needs. :)
I just did my first laundry load this morning and it was so quiet I thought the electricity was off lol! Wonderful job thanks for sharing all your info😅
you are the MAN .
Thanks for watching!
Thanks for the info it does work🙏
Happy to help! We’ll be here when you need us!
Calibration is a SERVICE mode operation - it is there for a reason instead of a normal user mode, so no, it is not necessary to run calibration every 30 days, if it WAS, then it would be made available as a USER mode or done automatically.. Yes if you change motor, shift actuator, control board, pump, it is recommended to run calibration - it isn't necessary for lid lock replacement and some other parts. If your machine is working normally and washing normally and going through cycles normally, no reason to fiddle with these options - the control board on these units "talk" with components, and wait for status returns (lid lock, RPM sensor, shift actuator, etc.) What calibration is likely doing is activating components and waiting for return signals and adjusting timing - there may be slightly variations between same components, so it's all about calibrating timings - as long as washing machine is going through each cycle properly and getting clothes washed there is absolutely no need to run calibration mode, it's not a game, and certainly not every 30 days. Calibration mode was meant to be used after replacement of specific components, ones that may have slight variations in timings.
as far as the turning dial clockwise to 12, then counter clockwise to 12, then forward-forward-forward-back-forward, you don't have to do it this way, you can just do back 1, forward 3, back 1, forward 1 - at least this works with the models with a digital display instead of leads at the bottom - for the model like the one in your video, just bring the knob to 12, then skip directly to the back 1 forward 3 and back 1 sequence.
On some models it appears machine will go through a self calibration of its own if you unplug the unit and plug it back in or a power failure - an example of this, upon plugging in the unit and starting a wash cycle you might hear the shift actuator - you usually do not hear it at the beginning as the position should already be at the drum spin position, as this is the mode used for sensing, before it shifts to agitator mode on the wash cycle.
We agree. You certainly don’t have to do it every 30 days and you don’t have to restart your phone regularly nor do you have to defrag your computer regularly either, change your car’s oil, do a tune up, etc. But doing these things regularly will certainly impact the longevity and functionality of your machine.
We certainly stress that the machines be calibrated when parts are replaced.
I’m a firm believer that the 1:57 manufactures are perfectly comfortable with their machines failing after customers buy them. So part of our job is to help customers not only use their machines properly, but be able to use them for as long as possible.
@@affordableappliances3082 Sure appliance makers do not mind failure, because they are not built to last. Failures can and will happen even with the best of informed consumers who take good care of their machines. I have had failures on both my dryer and washer within 8 years from purchase -I repaired both and saved $1k+ in repairs, and the majority of times it is minor stuff. For dryer common failures are the idler pulley wheel and on washers, lid lock assembly or shift actuator. Prior to that I had a washing machine and dryer last 20+ years, never were recalibrated and lasted a long time, in fact I changed both not because they failed but to upgrade. On my previous washer repair I did not recalibrate, I do not believe it is necessary for changing a lid lock assembly :P That said, recalibrating every 30 days will NOT prolong the life of your machines.the calibration only allows the control board to get used to the slight variations in timings and ensure optimal communication with components, it should be done, but after that, it is not necessary to redo it if washer is functioning normally, doing so won't increase longevity. When a failure needs to happen it will happen - either electronic or mechanical. If you use your washer and dryer according to specs and don't exceed load limits, y ou will be fine - sure if you use those machines everyday for multiple cycles, they will wear sooner - appliances are not built to last, but fortunately if you know how, repairs can be pretty inexpensive, and most of the time control board failures can be fixed if you know how to solder and find the defective component.
I've had a past refrigerator fail 3 times in the course of 2 years (from new) - control board failures, yet it was properly used, proper clearance, no power surges or any external issues . It amazes me how some companies use shoddy components in their appliances and electronic devices. I think it is best to hold on to old stuff and repair them, they will outlast a lot of the new stuff.
These are just junk. Been working on units for a few years now, all the new stuff is just junk. Cheap build quality at best and your paying way to much. Do yourself a favor, find an old machine, no suspension rod junk with eco water. Just an old machine that has a mechanical timer, real spring suspension underneath and built like a tank. Pay a fraction of the cost and get 20 plus years out of it. New stuff breaks and dies within 5 -7 years. Do yourself a favor, buy older stuff that has been taken care of, learn how to work on it and save yourself headaches.
You are not alone in feeling that way. The fact is we live in a country here in America, where the water laws are such that the manufactures have to build HE machines but there are little to no requirements for companies to make products last.
Ok Matt thank you OEM will get soon jus incase 🤙
Thanks again for watching. If you need to order anything, give us a call. :)
@@affordableappliances3082 I sure will🤙
Excellent... Thanks
Most welcome!
can you do manual test of this washer
Yes you can. It’s a different video but it’s one that is on the target.
Hello sir like ur video I have a question ok I did everything you did Excactly wen I put the knob to only the rinse light is on I pressed the start button and it doesn’t do anything no flashing lights it jus doesn’t respond tried it several times any advice would be appreciated 🤙
Are you having problems with your machine? Or did you just try to calibrate it? There’s a chance that you have an error code in the system and it’s keeping it from calibrating properly. We are currently building a video on how to check the codes.
Thank you sir my friend had one I put it in but the same thing happened on rinse mode it starts to spin then shuts off my friend said it must be the actuator cause tried the Tachometer test and it doesn’t read anything
That might be it. What are the codes? Thanks for watching!
I'll be contacting you again. New whirlpool sensors. Great learning video.
Does old washing machine need calibration? Ones without led with a timer
Nope, just regular maintenance is a good idea
Thank you for this video. You provided background and showed how to calibrate and telling the range of products this method works. good video.
My green LED's are all lit up & do not flash from right to left when I start the Recalibration mode. Does that indicate a bad Control Board? My Kenmore VMW is currently stuck on the Wash cycle. Thanks.
You could have some other problem. You might want to check the codes in your computer or call a technician.
Dude We've had this washer FOREVER and NEVER KNEW about calibrating and resetting. Did BOTH and ...Mr. Washing Machine is ONE HAPPY CAMPER!!! Works like it's BRAND NEW - FINALLY! We've moved it maybe 6-7 times over the years and just plugged it in and nothing ever seemed to get clean or worse - it made new noises. Did what You showed and...THANK YOU!!!!!!!!!!!!!!!!!!!!!!!
We are so glad you are happy!
My lights will not come on at all it's green inside the back but no lights in front
Oh, are you talking about the LED in the back? I think it should be either a regular singular link or it should be a solid color.
In front there's no light to start or anything but in back I see a green light so it won't turn on at all
That’s an amana
It is designed by Whirlpool. Whirlpool owns all the Maytag names.
What if the washer doesn't switch to wash after you calibrate
I am not sure if I completely understand a question. After the calibration cycle, the machine should just shut off and be in standby. If your machine still doesn’t wash after calibration, you might have some error codes that need to be addressed.
should i do it with clothes inside?
Nope. Empty.
Rite on thank you for replying it calibrates correctly I jus found out my capacitor is not good I jus changed it gonna give it a shot soon looking forward to ur videos 🤙have a wonderful & blessed day
That’s great. I’m glad you figured out what was wrong. Often times when you replace a part, you might have a code that needs to be erased. But try calibrating it after you put in a capacitor. We can get one for you if you need to order one.
AWESOME!! Thank you so much! You helped me learn and fix this washer. May God bless you so very much!
My stay light wash on?
Please clarify.
@@affordableappliances3082 the light of wash is always on and doesn't do anything?
Or on my machine it is:
Top center, left, right, right, right, left, right. Amana bought 2022
Yeah some of the later models with a full dial, you can just do it that way. Or there is a Whirlpool design where the knob does not turn 360 degrees. That would operate differently. We hope to have a video on that soon. :) Thanks for watching!
Just bought an Inglis nov 17....worked for 3 loads.😡
Bummer. Did you buy it new?
Where are the error codes. Calibrated just as you showed. I ran it and it still goes back to wsh after the cycle. Dont see any codes
The codes come up with the first click after the lights are blinking. You can find documents on how to decipher them inside the body of your machine or online. We are working on a video to help people understand how to get the codes and read them.
Thank you so much for this!! Saved me some hundreds of dollars trying to get a professional to look at my washer or to get a new one.
You are so welcome! We’ll be here when you need us!
My washer keeps filling and then all off a sudden the light goes off and it starts draining when i start it. Do i need to trash the washer?
I would call a trusted technician.
when i do this it only clicks does nothing else blinking lights clicks then lights go off nothing else. What could be wrong?
You might have an error code.
1:47 to skip the talk.
Thanks for watching!
@@affordableappliances3082Thank you for the video! Worked perfectly.