Salute from Siberia, Bro. I am pleased to watch your video reviews, I have a question for you, what do you do with the old parts that you shoot from cars? I have an old Toyota 4runner 1990 release, if you do not need these parts, you could not send them to me? I would be very grateful to you, as with us, these shock absorbers and springs are very expensive, and I do not have the opportunity to buy them ... Thank you
I noticed you had falken wildpeaks on the vehicle when you lowered it to the ground but at the end of the video they were bfg ko2"s. Was there a problem with the falkens that made you switch?
Lol y’all need to check your eyes again. One had falkens and the other one had ko2s . pay attention to the 2 different running boards that the 4Runners had .
Don't let that stop you. There are good after market options to achieve Apple Car Play. I hope you aren't thinking about a TRD Pro. If so you will be disappointed by the lack of tech bells and whistles. The Tacoma gives better options. Toyota is wierd. They probably will only slightly update the headlights and tail lights for 2020.
Greg Baker you would think the Japanese built would offer the most tech. I went with the Limited to get more tech. I’ll likely will X the XREAS and add the Fox soon. Just got that airbag recall at Longo Toyota and they said shocks leaking. So I’ll lift it, X the 20’s for 17”’s and delete the chrome with a wrap. That will be my TRD alternative. I owned an FJ60 and FJ62, so I know how to off-road without out all the fancy assistance that the TRD offers. I’m happy with my tech bells and whistles.
@@SNKFA its my understanding that the vehicles built in Japan put build quality before the bells n whistles. But the 4Runner does need to step its game up. I'll still take reliability & value over anything else.
I have a 21 4Runner ORP and have the Westcott Designs lift which gives you the 3” in the front and 1.25” in the rear. Will those SCS rims fit without a bmc or no? Also, do I need UCA’s with that lift and rim setup?
Is a "body chop" the only way to fit 33" tires with no rubbing on the 5th gen 4runner? How do you deal with the dreaded "lean" when lifting the 4runners with KDSS?
No chop needed if proper wheel specs are used. SCS makes them slightly more aggressive which requires a chop to properly clear as we had to here.. The lean is minimal to none, almost all Toyota trucks have a natural lean, nothing new.
@@zacharyharper5421 17x8.5 0 offset w/ 33" tires(285/70/R17 More aggressive offset and bigger tires= BMC Don't be skeered! I am putting on Method 701 17x8.5 0 offset and 285/75/R17 Toyo OC AT3 (roughly 34" tall) tires and am doing the BMC. With a Radflo lift and Icon Delta Tubular UCAs. Wanna be a little different than all the 285/70 KO guys.
@@yotaman492 thank you for sharing, those Methods are are a nice looking wheel + 34's will be a nice size. Will your wheels end up pushing your tires outside the fenders? What is it that you like about the Radflo product?
@@zacharyharper5421 a 17x8.5 wheel at 0 offset running 285/70 is fine. A 17x9 -12 offset running the same tires will rub, is my understanding. With a slightly bigger tire, ill need to do the BMC, which is fine with me. As far as Radflo, I've talked to several shops & heard great things about both Radflo & Icon. I chose Radflo b/c its individually owned & the service is top notch, while Icon is part of a big corporation. Also Radflo has a better price point. I've talked to: Apex Overland, MetalTech 4x4, Nitro Gear, Method Wheels & East Coast Gear Supply while researching my build. I went with Apex for suspension & skid plate, getting regearrd diffs from ECGS & wheels/tires from local Discount Tire(close to home & 0% financing). Hope this helps
they cant even keep them in stock on their own site. Its hard to a pair.... I tried last two re-stocks and couldn't buy fast enough before they sold out. VTX is a similar design but has more products in stock.
Hey guys, just a quick question. Are you using the OME 2885 springs ? How is the ride on them as they are heavy duty coils. Would the OME 2884 be better for a softer ride ?
Hey guys, could use these Bilstein on Regular stock tires, I am looking to get rid of the stock shocks from my Four Runner, I have been checking Bilsteins out, Let me know what ya think, Thanks!
Also guys just checking out the clearance on those big tires, here in West Virginia, you would destroy a fender with the trenches and off roads that have been damaged by water run off, don’t get me wrong they look really good but this is just one instance I would have to take into consideration before I can go with bigger tires, Thanks
so to lift it parts & labor minus the wheels about how much does a job like this cost? I'm curious I want to lift up my Tacoma too but i want to do it the right way not those cheap lift that's going to damage my truck
With the constant changes with new importing tariffs and material costs, we try not to post prices on here because it may change depending on when people read it. Please contact us by phone or e-mail for accurate quotes for when you need it. We can be reached at 626-442-3150 and are available 10AM-5PM PDT weekdays and 10AM-4PM PDT Saturdays. We can also be reached by e-mail 24/7 at sales@88rotors.com. Thank you for your interest in our products/services!
No, never planned on that. We are not a DIY channel but more so to showcase the work that we do. Truth is, we don’t make money off DIY videos but rather the services that we provide for the people that don’t want to do it themselves. Hope you understand! Thank you for viewing.
SUBSCRIBE & LIKE FOR MORE DAILY VIDEOS!
Salute from Siberia, Bro. I am pleased to watch your video reviews, I have a question for you, what do you do with the old parts that you shoot from cars? I have an old Toyota 4runner 1990 release, if you do not need these parts, you could not send them to me? I would be very grateful to you, as with us, these shock absorbers and springs are very expensive, and I do not have the opportunity to buy them ... Thank you
I love those negative offset wheels! Makes the 4runner look more aggressive! 💪
Dang! Those Wildpeak tires are sick! Love the channel! Keep it up. Shout out from Texas!
Thank you!
Looks good!! Those speed bumps at the mall will be no match!!
Great job was done to that 4RUNNER!!! 👍👍👍 EXCELLENT VIDEO!!!👌👌👌
I noticed you had falken wildpeaks on the vehicle when you lowered it to the ground but at the end of the video they were bfg ko2"s. Was there a problem with the falkens that made you switch?
Good eye man!
Lol y’all need to check your eyes again. One had falkens and the other one had ko2s . pay attention to the 2 different running boards that the 4Runners had .
@@ImBrickedUpRightNow Oh snap, youre right. Well done.
is there a reason why one required a BMC and the other didnt or was it just what the customer wanted?
I would like to know as well
Any reason why everyone opts for the ome/bilstein combo, rather than just getting the full ome setup?
Price point and quality of Bilstein is 👍🏻
Bilstein has a little bit smoother ride than the ome shocks. This lift had kinda become the go to cheap but quality lift for 4runners.
SCS WHEEL ALL DAY! That 4runner came out clean. Hoping to pick up a 2020 if Toyota adds Apple car play.
Don't let that stop you. There are good after market options to achieve Apple Car Play. I hope you aren't thinking about a TRD Pro. If so you will be disappointed by the lack of tech bells and whistles. The Tacoma gives better options. Toyota is wierd. They probably will only slightly update the headlights and tail lights for 2020.
@@SNKFA Difference is that the Tacoma is built in NA while the 4Runner is built in Japan. Weird
Greg Baker you would think the Japanese built would offer the most tech. I went with the Limited to get more tech. I’ll likely will X the XREAS and add the Fox soon. Just got that airbag recall at Longo Toyota and they said shocks leaking. So I’ll lift it, X the 20’s for 17”’s and delete the chrome with a wrap. That will be my TRD alternative. I owned an FJ60 and FJ62, so I know how to off-road without out all the fancy assistance that the TRD offers. I’m happy with my tech bells and whistles.
@@SNKFA its my understanding that the vehicles built in Japan put build quality before the bells n whistles. But the 4Runner does need to step its game up.
I'll still take reliability & value over anything else.
SCS all the way 😁
I have a 21 4Runner ORP and have the Westcott Designs lift which gives you the 3” in the front and 1.25” in the rear. Will those SCS rims fit without a bmc or no? Also, do I need UCA’s with that lift and rim setup?
Looks super clean
both wheels are -10 offset, wonder why you did a bmc on scs wheels only ?
BMC looks good, very clean.
Do you ever put 35's on a newer 4runner?
Can y’all cut into a rav4 to fit bigger tires? Been thinking of getting one 4Runner too massive.
Is a "body chop" the only way to fit 33" tires with no rubbing on the 5th gen 4runner? How do you deal with the dreaded "lean" when lifting the 4runners with KDSS?
No chop needed if proper wheel specs are used. SCS makes them slightly more aggressive which requires a chop to properly clear as we had to here.. The lean is minimal to none, almost all Toyota trucks have a natural lean, nothing new.
@@88ROTORS
Please provide the wheel spec that will not require a body chop
@@zacharyharper5421 17x8.5 0 offset w/ 33" tires(285/70/R17 More aggressive offset and bigger tires= BMC Don't be skeered!
I am putting on Method 701 17x8.5 0 offset and 285/75/R17 Toyo OC AT3 (roughly 34" tall) tires and am doing the BMC. With a Radflo lift and Icon Delta Tubular UCAs. Wanna be a little different than all the 285/70 KO guys.
@@yotaman492 thank you for sharing, those Methods are are a nice looking wheel + 34's will be a nice size. Will your wheels end up pushing your tires outside the fenders? What is it that you like about the Radflo product?
@@zacharyharper5421 a 17x8.5 wheel at 0 offset running 285/70 is fine. A 17x9 -12 offset running the same tires will rub, is my understanding. With a slightly bigger tire, ill need to do the BMC, which is fine with me.
As far as Radflo, I've talked to several shops & heard great things about both Radflo & Icon. I chose Radflo b/c its individually owned & the service is top notch, while Icon is part of a big corporation. Also Radflo has a better price point.
I've talked to: Apex Overland, MetalTech 4x4, Nitro Gear, Method Wheels & East Coast Gear Supply while researching my build.
I went with Apex for suspension & skid plate, getting regearrd diffs from ECGS & wheels/tires from local Discount Tire(close to home & 0% financing). Hope this helps
Scs wheels all day
So what all do you need to asemble the front shocks. I am doing a 5100 and ome with spc upers on my 4th gen
What are the reasons as to why you do not carry BFG tires?
Love your work. Another awesome build. SCS ftw!
Thank you!
It looks good. How much was the lift on this off road model, 3 inches ?
What are the reasons why you guys don't carry the scs wheels?
Stock is very limited. Even from the SCS website. Usually sells out in a few hours
any particular reason you do not carry SCS wheels in your shop?
they cant even keep them in stock on their own site. Its hard to a pair.... I tried last two re-stocks and couldn't buy fast enough before they sold out. VTX is a similar design but has more products in stock.
Hey guys, just a quick question. Are you using the OME 2885 springs ? How is the ride on them as they are heavy duty coils. Would the OME 2884 be better for a softer ride ?
Hey guys, could use these Bilstein on Regular stock tires, I am looking to get rid of the stock shocks from my Four Runner, I have been checking Bilsteins out, Let me know what ya think, Thanks!
Is the Wild peak better then the BFGoodrich?
Also guys just checking out the clearance on those big tires, here in West Virginia, you would destroy a fender with the trenches and off roads that have been damaged by water run off, don’t get me wrong they look really good but this is just one instance I would have to take into consideration before I can go with bigger tires, Thanks
Generally consensus is in the 4runner community is 285s with a lift and body mount chop clears everything.
Excelente video, felicitaciones. Cual es la parte delantera que esmerilan y para que se hace? Muestren con más detalle. Saludos.
What does something like this cost for labor as an overall estimate?
so to lift it parts & labor minus the wheels about how much does a job like this cost? I'm curious I want to lift up my Tacoma too but i want to do it the right way not those cheap lift that's going to damage my truck
With the constant changes with new importing tariffs and material costs, we try not to post prices on here because it may change depending on when people read it. Please contact us by phone or e-mail for accurate quotes for when you need it. We can be reached at 626-442-3150 and are available 10AM-5PM PDT weekdays and 10AM-4PM PDT Saturdays. We can also be reached by e-mail 24/7 at sales@88rotors.com. Thank you for your interest in our products/services!
Would you guys be willing to do complete how to vids?
No, never planned on that. We are not a DIY channel but more so to showcase the work that we do. Truth is, we don’t make money off DIY videos but rather the services that we provide for the people that don’t want to do it themselves. Hope you understand! Thank you for viewing.
So you don’t do the necessary alignment?
Alignment is recommended a couple of hundred miles or a week after the installation once the suspension settles.
What size of tires?
285/70/17
Looking good!
Love it
I like scs👊
2:19 Ooops!
looks hot!
Do you do gear change???
We no longer do regears. A very time consuming job which we no longer take iin.
That’s too mad. You guys do a great job on upgrade mods. You know a place you recommend for regears?
@@edocampo4917 No referral for that, sorry.
T’OH-yota...not Tee-yota lol
P.S. new sub-er, do like your vids!
Say it fast enough and the T sounds like it’s Tee. Nobody is intentionally saying Teeeetota here. Lol
@@jehfifhphfiefhifh3559 lol kiss my ass too will ya
@@88ROTORS haha I'll take your word for it ;)
blahblahblah blahblahblah Your stupidity has yet again been proven. Racist stupid ass!
Btx
Some badass 4runners, but Jesus Christ the music in this video is annoying af