That's a bad situation to have...gun problems in the middle of the paint job. I don't blame you at all for finishing the job with the other paint gun. Nice quality work Pharraway 🤝
SprayWayCustoms I always laugh at these people bragging about their harbour freight guns that spray as well as an Iwata or Sata and its $20.... Umm it is until it breaks after two paint jobs. Too many Gimmick guns, Iwata, Sata, Devilbiss and a couple others, the rest are just gimmick garbage. I have cheap guns and iwatas, you have to be on crack to think one of those $50 guns are better in anyway... The packaging isn't even better.lol. I gotta get me a 1.2 Sata 5500X with the I patern next... Bad ass gun!
@@fakegibsonssuck7755 ya I dont even use the harbor freight guns for primer. The only cheaper gimmick guns I like are the spray it33000 and w400 clones. Cartman's on amazon mp version sprays the best I've seen big large air horns like the lv2 aircap. And when it needs rebuilding or parts replaced I order offical iwata parts and it's a direct fit. But in all honesty the w400s and belleria versions can be had for around 170 180 shipped on ebay. The masterpro44 gun is actually a good gun. It's a prolite made for TCP global. Parts swap and it sprays just the same. Only difference is TCP offers full rebuild kits and 1.3 1.4 1.5 and 1.8 tip kits but only offer basically the hv30 equivalent air cap. The gun will use every bit of 16cfm stated with a wide open fan. For 130 for rebranded prolite with complete replacement parts priced properly or 189 for all 4 tip kits and the high flow regulator it's a steal. I wish I'd bought two more of them instead of a bunch of bs guns. Only lower priced guns that have rivaled any of my name brand guns. The cartman h-899 started out on amazon 28 it's now 45 and worth double. It will lay glass just as my name brand prolite or sagola. Its hvlp 2 technology and is a air hog. Beautiful gun, next is the cartman mp400 it's not like the 33000 or the k400 clones. It's basically the RP version great material transfer nice large even tulip fan pattern. The next is the playtu 5500 sata clone and the playtu 5000b rp clone. I'd rather buy 7 of them then one real one. Even the guys at my shop bought some. And all were stunned by the h899 performance. There are a few gems. The Chinese can make a good product when they want to. $5 of CNC metal is 5 of cnc metal a couple ld those guns are just like name brand with a different logo but all else about equal. Even packing and seals are good. Not cheap crap that breaks. I've left solvent in some of those guns for 2 weeks with no seal issues
for future videos could you please show completed project, you do great work . just want to see completed with all the trim installed and masking removed. you make it look easy for sure
Great video. Thanks. I'm new to painting and will be painting Matt over 2 different colours. I don't need to worry about the height difference on the line? There will be more paint on one side right?
I just repainted my hood. Posted a pic on my Instagram. I've learned a lot from watching your videos. I've still got a ways to go but appreciate you sharing your expertise!
Nice video, but just watching makes my arm sore! Lol! On this truck, did you colorsand and buff it out or leave it as it was? I would like to see you colorsand and buff a job. Just subscribed. Tom
no I did not color sand and buffed it and I do have videos that I have shown how to color sand and buffed this is the link ua-cam.com/video/XBcOUQyBTCU/v-deo.html
Do you think the tamco gave you enough film build to not have to flow coat where the tape line is? I'm using tamco 2104 and about to do a two tone truck as well and was just wondering. Great video rhe truck looks awesome😀😀. Your a great painter.
My Devilbiss Finishline FLG-4 gun says to not go over 26 psi. How am I supposed to spray this clear at 35 psi? I was told my gun will do primer, basecoat and clearcoat.
Hi. Glad to you get inside lip area of the bed. You did a video here you used this stuff from an aerosol can on your spray out cards. Instead of using clear coat. Do is not change the color to much? Do you know the name of that stuff or link? Thank you.
Question, I am rewatching this video for the 4th of 5th time, getting ready to do the 2-tone on the VW truck, anyway I have a question about the way you spray clear just want to know why you don't start high and work your way down to the rocker panels, my thinking would be to paint the roof first then work down, but you work from bottom to top, except the tail gate you go top down. Is this just your preference or is there a reason for your clear procedures?
Is painting candy that much different than painting base/clear I know the overlap is much greater but all in all is it that much different the reason I ask is Im about to paint my truck candy. Ive painted it a few times it always came out good, Im just curious
You are making me scratch my head in wonderment of how your painting technique is. Why do you keep stopping in the middle of painting a panel. If that were a candy job you would have heavy spots every where.
That truck looks totally different, great job, I will be painting my first vehicle this week, I hope I’ll become a professional like you, thanks a lot , I’m learning a lot from you.. look me up I will be painting the black truck and I will be painting the 78 Monte Carlo sometime next summer. Thanks..
Thanks for making the videos, after watching, and re-watching several of them, I'm working on the courage to start painting a horse trailer project I started. Excellent work!.
That look sweet as awesome job hope my car turns out that nice doing it two toned black top with silver base, airbrushed sides with blood red candy over the whole car . Carn't wait to see more of your vids cheers from rednutts in Queensland Australia
More then one way to skin a cat. Some people walk a vehichle some people leap frogs some start on hood some start on roof. It's the end result that counts. And also knowing your product. What someone can do with x brand might have issues with another brand. And the reducer for the conditions. Some conditions the paint will stay wet longer and you have a few extra mins and can paint differently. Other times like hot and humid conditions that may not work and dry spray can happen quickly. Just like with my method I use medium reducer in everything year round. I've learned how to compensate the amounts whether its 40 outside or 120 with heat index. We stay high humidity year round. Lucky if it drops below 60 70 percent even in winter.
Pharraway, You did the right thing, you recognized the problem right away and without a second thought, went straight to a second gun. Re-start without a problem. I saw that and the first thing, I thought “Air inlet restriction” on the cup. I thing we are guilty of looking at it only to make sure what direction and it’s on. We never check on a new one if plastic flashing still in the hole or never drilled. I love the extra long wood bench you have, it keeps it simple. Trucks! It might as well be a school bus. Exhausting for base, re-tape, clear. Wow, it should pay more as trucks keep getting taller. I am 6’3”, but you have to watch the bench, the hose, a spot for your hand then reaching, distance, speed, all while watching for dry spots as you plan your next wet edge! You are an athlete or a painting marathon! World Champ! Omaha.
Hey my friend, could you please do a video showing how to smooth the feel of a two or multi color paint job on say a flat panel, I know you hide it with the clear coat, but how do you get that "like glass" feel??
I own a 2002 Infiniti I35 and the paint on it is called (Color Code: AX5Red Pearl Tricoat). I went to the local SW paint shop and asked them to mix the paint for me. They told me that that color is not a tricoat, but a simple base coat with clear coat on top. the paint they gave me already has pearls in it. I don't know who to trust.
Noticed that you left the door handles on the truck. Just wondering if this is ever an issue? I would be scared that the paint would bridge between the handle and door.
Sealer would have done wonders for ya, you got too many dark and light spots. Wasted alot of painted trying to cover it. I dont paint right over bare plastic if that what the black areas were. One coat of sealer OR PRIME the spots with a tinted primer! I do that anyways, always tint closer to the color of the base. Keep black, white, and gray sealer / primer on hand .
Of course, the prep work is vital to an outstanding finish. However, the reward is when the clearcoat goes on and you see it for the first time. You’re churning out really nice work!
You might be painting that truck on your carport but you ain't no stranger to a spray gun, if you are your mama gave you a gift. I see an experience painter. I was trained by a retired UAW painter back in the 80s, he was trained before the automotive robot painters.
Thank you .. I’m doing a 58 Corvette and any suggestion on the “white cove” section? Do I paint the white after the body or the body after the white cove.. it’s red and white .. I’m thinking the white cove after the body “red” .. I think in the 50’s they painted the white cove as an option and they did it at the dealers . Thank you ..
Hey brother. I have been following you for a while and even gotten some good feedback. How do you figure what to charge people? I have had some people that want to paint for them and I'm not sure how to charge. I know from doing my own that it can cost a thousand or more in materials.
No te ballas awitar amigo pero esa carbono no se por que cuesta tanto si es la reina del over spray si dejara el acabado bien pero tambien acaba con todo asu alrededor including your hands eyes skin and what l think about the first paint gun l will save my comment on that one ...
very nice job two tone is always different to do and you did a great job taking your time to mask and tape the straight line down the truck side looks awesome keep up the good work follow me on Instagram at eliteautobody316 I haven't tried the tamco clear but I live in Kentucky so I don't know if I can even get it.#keeponspraying
yes I know I was going to do a review on the Warwick but did not go well so I had to finish the truck, I was not comparing the two, and about the bc yes the urekem paint works awesome brother Thanks
Most of us got interested in Body and Paint just like you because we had a CAR we liked that needed paint and we didn't have thousands for a new paint job. Pharraway I think charges less than most and does a fantastic job but you gotta read and study (plus videos) and you CAN do this yourself Mario.
That's a bad situation to have...gun problems in the middle of the paint job. I don't blame you at all for finishing the job with the other paint gun. Nice quality work Pharraway 🤝
Thanks, brother yes it sux but oh well 🤝
SprayWayCustoms I always laugh at these people bragging about their harbour freight guns that spray as well as an Iwata or Sata and its $20.... Umm it is until it breaks after two paint jobs. Too many Gimmick guns, Iwata, Sata, Devilbiss and a couple others, the rest are just gimmick garbage. I have cheap guns and iwatas, you have to be on crack to think one of those $50 guns are better in anyway... The packaging isn't even better.lol. I gotta get me a 1.2 Sata 5500X with the I patern next... Bad ass gun!
@@fakegibsonssuck7755 ya I dont even use the harbor freight guns for primer. The only cheaper gimmick guns I like are the spray it33000 and w400 clones. Cartman's on amazon mp version sprays the best I've seen big large air horns like the lv2 aircap. And when it needs rebuilding or parts replaced I order offical iwata parts and it's a direct fit. But in all honesty the w400s and belleria versions can be had for around 170 180 shipped on ebay. The masterpro44 gun is actually a good gun. It's a prolite made for TCP global. Parts swap and it sprays just the same. Only difference is TCP offers full rebuild kits and 1.3 1.4 1.5 and 1.8 tip kits but only offer basically the hv30 equivalent air cap. The gun will use every bit of 16cfm stated with a wide open fan. For 130 for rebranded prolite with complete replacement parts priced properly or 189 for all 4 tip kits and the high flow regulator it's a steal. I wish I'd bought two more of them instead of a bunch of bs guns. Only lower priced guns that have rivaled any of my name brand guns. The cartman h-899 started out on amazon 28 it's now 45 and worth double. It will lay glass just as my name brand prolite or sagola. Its hvlp 2 technology and is a air hog. Beautiful gun, next is the cartman mp400 it's not like the 33000 or the k400 clones. It's basically the RP version great material transfer nice large even tulip fan pattern. The next is the playtu 5500 sata clone and the playtu 5000b rp clone. I'd rather buy 7 of them then one real one. Even the guys at my shop bought some. And all were stunned by the h899 performance. There are a few gems. The Chinese can make a good product when they want to. $5 of CNC metal is 5 of cnc metal a couple ld those guns are just like name brand with a different logo but all else about equal. Even packing and seals are good. Not cheap crap that breaks. I've left solvent in some of those guns for 2 weeks with no seal issues
Great job!! Only thing i start at roof and spray down as so air line don't hit wet sides. Awesome shooting bro.
Thank You brother
Thanks for using and reviewing Tamco! We appreciate you 🤘🏻🙏🏻
any time awesome clear
@@PHARRAWAY is that the same clear that spray ways custom use???
@@jackhowlett7413 Yes I believe so
@@PHARRAWAY 👍🏽great video its always good to watch you and others on how you do things in the paint booth get ideas keep up the good work
What color codes are these colors ???
You doing a good job but you need to make a full pass never stop on a crack or doorknob bro
When doing a two tone paint how long can tape stay on first paint and any tricks to prevent tape from pulling paint off?
A good tip for everyone, always have a back up gun on hand you never know when you will need it, not worth ruining a good job for not having one.
That is right brother thanks
Amazing Job. I'm proud to say that's my truck. Cany wait to pick it up. Great work my friend. As always your doing amazing work.
Thanks
Instagram or picturea of the finished product man?
for future videos could you please show completed project, you do great work . just want to see completed with all the trim installed and masking removed. you make it look easy for sure
Great video. Thanks. I'm new to painting and will be painting Matt over 2 different colours. I don't need to worry about the height difference on the line? There will be more paint on one side right?
looks like you holding the gun 4" from the car and spraying the paint i thought it supposed to be 12" sir
When you paint a car you do long strokes not half duck caller you do long strokes no stop no half and then do the other half the long strokes
I would have done the roof first but I'm just starting out painting.
That tape line pull! Impressive. 👏
And watching this had my eyes watering... Good work. Cheers!
LOL Thanks brother it looks worse in camera but its not that bad
Taped over the red.what about 3 layer step up of black?
How to I learn how to do this and fulfill a career while doing it?
You make painting look SO easy. You've got a LOT of talent. I have just started learning how to paint and I thoroughly enjoy watching your videos.
Thank you I appreciate it GOD BLESS
I just repainted my hood. Posted a pic on my Instagram. I've learned a lot from watching your videos. I've still got a ways to go but appreciate you sharing your expertise!
@@WJHandyDad Thanks brother you can e-mail me pictures at pharrawaypaint@gmail.com if you like so I can see them
Good job
Do the black first..way less to remask
After all your paint jobs do you cut an buff. How do you have your garage set up for painting air flow
I have some videos showing that
Why do you have that fan blowing into your shop do that work better I have my fan turn the other way with a filter on the back of it
yes
Nice video, but just watching makes my arm sore! Lol! On this truck, did you colorsand and buff it out or leave it as it was? I would like to see you colorsand and buff a job. Just subscribed. Tom
no I did not color sand and buffed it and I do have videos that I have shown how to color sand and buffed this is the link ua-cam.com/video/XBcOUQyBTCU/v-deo.html
How’s the plant on this car today in 2024😊
???
Hello again PHARRAWAY, DID YOU REMOVE THE POT VENT CAP FROM THE SET-UP BEFORE SPRAYING?? BETTER AIR FLOW/FLUID FLOW, THANK,S PJP
Yes
@@PHARRAWAY I never thought of that; thank,s again,PJP
Did you sand over the red before you painted it black?
No I did not, not necessary
Do you think the tamco gave you enough film build to not have to flow coat where the tape line is? I'm using tamco 2104 and about to do a two tone truck as well and was just wondering. Great video rhe truck looks awesome😀😀. Your a great painter.
Yes you will have a tape line no matter what but it's not even noticeable, so about the tamco it will build a good film
4.5 mils on average with 3 coats
PHARRAWAY does the tape line leave grooves from the glue on the tape?
My Devilbiss Finishline FLG-4 gun says to not go over 26 psi. How am I supposed to spray this clear at 35 psi? I was told my gun will do primer, basecoat and clearcoat.
Don't pay attention to the box brother That gun is more then capable of it
@@PHARRAWAY Dang bro, thanks for the response and advice! Appreciate it very much. Stay well.
Hi.
Glad to you get inside lip area of the bed.
You did a video here you used this stuff from an aerosol can on your spray out cards.
Instead of using clear coat.
Do is not change the color to much?
Do you know the name of that stuff or link?
Thank you.
No it will not
@@PHARRAWAY
Hi. Was their stuff in an aerosol can to use on spray outs. Instead of mixing up some 2K clear?
Thank you.
Question, I am rewatching this video for the 4th of 5th time, getting ready to do the 2-tone on the VW truck, anyway I have a question about the way you spray clear just want to know why you don't start high and work your way down to the rocker panels, my thinking would be to paint the roof first then work down, but you work from bottom to top, except the tail gate you go top down. Is this just your preference or is there a reason for your clear procedures?
Is painting candy that much different than painting base/clear I know the overlap is much greater but all in all is it that much different the reason I ask is Im about to paint my truck candy. Ive painted it a few times it always came out good, Im just curious
Yes it is
@@PHARRAWAY can you share a couple tips or some advice when it comes to candy Im using all Tamco products
As always you are amazing
You are making me scratch my head in wonderment of how your painting technique is. Why do you keep stopping in the middle of painting a panel. If that were a candy job you would have heavy spots every where.
Lol I have a video showing a candy paint job take a look
that awesome ,loved it
wish one right sir 4" or 12" from the truck painting
I use 4 to 5 In
One of the worst spraying teknique thusfar
Thank You for your comment GOD BLESS
That truck looks totally different, great job, I will be painting my first vehicle this week, I hope I’ll become a professional like you, thanks a lot , I’m learning a lot from you.. look me up I will be painting the black truck and I will be painting the 78 Monte Carlo sometime next summer. Thanks..
Very good job
you cant tell me you dont have issues with dust
Little nibs yes but that's it
Man you make this look easy! Great job man! Look forward to seeing your videos.
Thank you brother
Good videos no crap music just good spray jobs
Thanks for making the videos, after watching, and re-watching several of them, I'm working on the courage to start painting a horse trailer project I started. Excellent work!.
That look sweet as awesome job hope my car turns out that nice doing it two toned black top with silver base, airbrushed sides with blood red candy over the whole car .
Carn't wait to see more of your vids cheers from rednutts in Queensland Australia
When painting a hood you use the push pull method so that you do t ger a hard line where the paint starts to dry.
no I have never gotten any hard line with this method
More then one way to skin a cat. Some people walk a vehichle some people leap frogs some start on hood some start on roof. It's the end result that counts. And also knowing your product. What someone can do with x brand might have issues with another brand. And the reducer for the conditions. Some conditions the paint will stay wet longer and you have a few extra mins and can paint differently. Other times like hot and humid conditions that may not work and dry spray can happen quickly. Just like with my method I use medium reducer in everything year round. I've learned how to compensate the amounts whether its 40 outside or 120 with heat index. We stay high humidity year round. Lucky if it drops below 60 70 percent even in winter.
You are a legend
Pharraway, You did the right thing, you recognized the problem right away and without a second thought, went straight to a second gun. Re-start without a problem. I saw that and the first thing, I thought “Air inlet restriction” on the cup. I thing we are guilty of looking at it only to make sure what direction and it’s on. We never check on a new one if plastic flashing still in the hole or never drilled.
I love the extra long wood bench you have, it keeps it simple.
Trucks! It might as well be a school bus. Exhausting for base, re-tape, clear. Wow, it should pay more as trucks keep getting taller. I am 6’3”, but you have to watch the bench, the hose, a spot for your hand then reaching, distance, speed, all while watching for dry spots as you plan your next wet edge! You are an athlete or a painting marathon! World Champ! Omaha.
Thanks brother
What do you find is the best tape for your color division ?
3m fine line tape
thanks im a subscriber but probly also a pain I ask lots questions lol
Why didt you tape the handles?
customer wanted it painted
Hey my friend, could you please do a video showing how to smooth the feel of a two or multi color paint job on say a flat panel, I know you hide it with the clear coat, but how do you get that "like glass" feel??
I could tell you weren’t too excited, I had bad sputtering on a $30 gun, the tip/nozzle wasn’t sealed via threads 🧵
Yup but oh well Thanks brother
Hmmm won't there be a gap between two colors? Should of sand it down after first two layers of clear coat to make it even
Best paint video Iv seen . Thank you for your hard work making the video I’m sure it can be tuff filming with flash time
whats the tape?
it's from 3m called 233+
Whats is your fan set up? You get dust on your jobs?
no not at all fan set up is trigger wide open and fan wide open at 29psi
Sorry I meant the exhaust fans.
Mentor me brother, I would like to learn from you
any time brother
I own a 2002 Infiniti I35 and the paint on it is called (Color Code:
AX5Red Pearl Tricoat). I went to the local SW paint shop and asked them
to mix the paint for me. They told me that that color is not a tricoat,
but a simple base coat with clear coat on top. the paint they gave me
already has pearls in it. I don't know who to trust.
Buen trabajo amigo
Gracias amigo saludos 🤝
Noticed that you left the door handles on the truck. Just wondering if this is ever an issue? I would be scared that the paint would bridge between the handle and door.
No, I have never had any issues with that
I too use a self leveling red laser for my straight tape line. First time i figured that i could use my laser here for that I felt like a genius
Do you have the fan blowing inside or outside?
Sealer would have done wonders for ya, you got too many dark and light spots. Wasted alot of painted trying to cover it. I dont paint right over bare plastic if that what the black areas were. One coat of sealer OR PRIME the spots with a tinted primer! I do that anyways, always tint closer to the color of the base. Keep black, white, and gray sealer / primer on hand .
Of course, the prep work is vital to an outstanding finish. However, the reward is when the clearcoat goes on and you see it for the first time. You’re churning out really nice work!
Thank You brother
Hay shit happens it is always good to see the good and bad .
Also great to note that you're not alone when it happens to you ?
What´s spec. do you have on your air compressor?
ua-cam.com/video/wtKY-44KOsY/v-deo.html
Would definitely loved to have seen the truck unmasked and put back together in the sunlight. As always awesome job brother.
Thanks brother
What tape is that
Its from 3m fine line tape
How much paint does a truck like that take? And amazing work man! 👍🏽👍🏽👍🏽
this took 2qt of red and 2qt of black and 1gl of clear
Do u have Jon Kosmoski quotes going thru your mind when u spray or am I the only one.
LOL yes I'm a robot
looks great nice work....question how do you spray pearl paint ..?..can it be sprayed over any color..?..my car is inferno red....thanks
Yes it can and it will give it a awsome look brother
@@PHARRAWAY ok great keep up the great videos..thank you
Excellent video! I enjoyed watching your technique and you are good at what you do!
Hello I'm TommyBoy and I love the way you do things so right. I wish to ask for points and tip about painting candy colors. Help 🥺🆘
Anytime my e-mail is pharrawaypaint@gmail.com
You might be painting that truck on your carport but you ain't no stranger to a spray gun, if you are your mama gave you a gift. I see an experience painter. I was trained by a retired UAW painter back in the 80s, he was trained before the automotive robot painters.
Thanks brother
What gun is the black one
It's a walcom carbonio 360
Nice what color red is tht....🔥🔥🔥🔥🔥🔥🔥
it's the original dodge red
I would love to see finished product please
Sorry brother the owner took the truck already will do on the next one
Thank you .. I’m doing a 58 Corvette and any suggestion on the “white cove” section? Do I paint the white after the body or the body after the white cove.. it’s red and white ..
I’m thinking the white cove after the body “red” .. I think in the 50’s they painted the white cove as an option and they did it at the dealers . Thank you ..
Hey brother. I have been following you for a while and even gotten some good feedback. How do you figure what to charge people? I have had some people that want to paint for them and I'm not sure how to charge. I know from doing my own that it can cost a thousand or more in materials.
Cool paint job!
Thanks for sharing 💥
Excellent job what kind of paint did you use to do the tape line brother ? Just regular or pin stripe tape?
3m 233+
Nice job bro but I have a question after how long you can remove the masking tape in the midle
Damn...looks really great...you always do great work...I hope the Honda comes out half as good. Thanks for the video.
It will brother Thanks 🤝🤝
Painful but hope it came out ok.
No te ballas awitar amigo pero esa carbono no se por que cuesta tanto si es la reina del over spray si dejara el acabado bien pero tambien acaba con todo asu alrededor including your hands eyes skin and what l think about the first paint gun l will save my comment on that one ...
Yes I know but it paints good I'll be bringing out the iwata supernova next
How it possible smooth between red and black..wats d technic
very nice job two tone is always different to do and you did a great job taking your time to mask and tape the straight line down the truck side looks awesome keep up the good work follow me on Instagram at eliteautobody316 I haven't tried the tamco clear but I live in Kentucky so I don't know if I can even get it.#keeponspraying
Thank You I will
omg did i just see you base over filler w/o primer?
Without a doubt. You can paint. You lay down some seriously nice paint jobs. I would love for you to redo my Mustang. Too bad I'm in Jersey
Thanks brother
That bc covers pretty good.Dont think the Warwick vs the Walcom is a fair fight.
yes I know I was going to do a review on the Warwick but did not go well so I had to finish the truck, I was not comparing the two, and about the bc yes the urekem paint works awesome brother Thanks
Seems to get a bit foggy near the end of each clear coat. 🌁
yup need a new fan
Awesome job man. I'm wanting to do my Yukon in two tone, black on the bottom and silver on top.
Beautiful Job 👍😎
God Bless 🙏
Great work like always, how did u like the clear
One of the best one's out there love it
Seen a black and orange one only the cab and Hood was 2 tone looked good.
doing a robots job eh
great job love the two tone and thank you
Thank You
Quedo chingona la trokita ..
Everything you do is amazing !!!
Who else freaked out when the guy try to touch the paint when he was doing the clear
lol
I need a paint job on my 87 olds cutlass. How much would it cost a two tone.
You can email me at pharrawaypaint@gmail.com
Just sent you pics
Most of us got interested in Body and Paint just like you because we had a CAR we liked that needed paint and we didn't have thousands for a new paint job. Pharraway I think charges less than most and does a fantastic job but you gotta read and study (plus videos) and you CAN do this yourself Mario.
@@67polara well said brother
Roughly how much would that cost to paint similar truck all one color
My eyes were burning just from watching this 😆
good looking truck, great job!
Nice job!! Liked and subbed. Whats the length and width of your garage if you dont mind me asking?
It's 12feet width and 26 feet long and Thank you for subscribing brother