My cheap homemade pontoon boat. Part 3

Поділитися
Вставка
  • Опубліковано 19 кві 2021
  • In this video we get a lot done. Paint the deck, build the railings, and add 2 motors!!!
  • Фільми й анімація

КОМЕНТАРІ • 54

  • @daniels4407
    @daniels4407 3 роки тому +6

    Looking great man. Can't wait to see it complete and on the water. Looks like a ton of fun!

    • @ShoreGarage
      @ShoreGarage  3 роки тому +2

      Thank you! Can’t wait to get it out on the lake!

    • @rickryan4321
      @rickryan4321 3 роки тому

      Looking for steering design

  • @siskine
    @siskine 4 місяці тому

    Super beau travail. Merci beaucoup 👍👍👍

  • @fahmilingrau498
    @fahmilingrau498 2 роки тому +1

    Great mantapp

  • @cornpop780
    @cornpop780 Рік тому

    Nice im going to make one

  • @BubbyPlaisan
    @BubbyPlaisan 2 роки тому +1

    When your barrels start colliding with docks and other stuff, they will cave and breach. High expanding marine foam will give u a lifetime boat. Made a house boat with 50 of them. Seen a house boat sink from empty exposed barrels. Good luck

    • @ShoreGarage
      @ShoreGarage  2 роки тому

      Wow that’s actually great to know! Do you have any brands that you recommend? And also where can I purchase it?

    • @prestonmcneal5023
      @prestonmcneal5023 Рік тому +1

      My grandfather actually hangs old boat seat over barrels. To prevent that. But i have the regular boat buoys.

    • @emeraldfox7175
      @emeraldfox7175 5 місяців тому +1

      Yea it's Hella expensive!!

  • @binhvo6920
    @binhvo6920 3 роки тому

    Hay !! Thank you

  • @dddccc5036
    @dddccc5036 3 роки тому +1

    Can’t wait to see it done! How much has it cost you so far?

    • @ShoreGarage
      @ShoreGarage  3 роки тому +2

      So far I am about $500.00 into it. The price of lumber is super high right now so that’s why it’s that much. 2 years ago i would have been in $200.00

  • @vonscheer3993
    @vonscheer3993 Місяць тому

    How much weight will one barrel hold out of the water?

  • @richardbell5415
    @richardbell5415 Рік тому

    What was total weight great build

  • @bradkvanbek7148
    @bradkvanbek7148 2 роки тому +1

    Seal the barrels in cold weather to prevent collapse with warm weather. I did not fasten my barrels as I never take it out. WI DNR ticketed me for having a trolling motor on our raft. But we are going to trial.

    • @ShoreGarage
      @ShoreGarage  2 роки тому

      Yes I will def do that this winter when it gets colder. And wow! I had no idea they could ticket us. I will have to get my hull numbered

  • @mudd1761
    @mudd1761 3 роки тому +2

    The cool pieces of hardware are called cleats. Just so you know

  • @kriscan6231
    @kriscan6231 10 місяців тому

    I wonder if you filled the diverters with foam

  • @SpryGuy289
    @SpryGuy289 3 роки тому

    Thanks for the vid! Where can I get the barrels from?

    • @ShoreGarage
      @ShoreGarage  3 роки тому +1

      Try Facebook market place!

    • @twistedpixel2558
      @twistedpixel2558 2 роки тому

      If you're fortunate enough to live within driving distance of a dairy you can usually get as many as you want for free. They get all kinds of chemicals in plastic barrels like iodine for teat dip which is used for antiseptic to clean the teats before they put the milkers on and also for treating abscesses on legs and whatnot. Dairy farms are usually trying their level best to keep their farm from being swamped in plastic drums.

    • @ShoreGarage
      @ShoreGarage  2 роки тому +1

      @@twistedpixel2558 wow I didn’t know that! I actually do have dairy farmers not far from me here in the southern part of New Jersey.

    • @twistedpixel2558
      @twistedpixel2558 2 роки тому

      @@ShoreGarage Ya, I'd definitely call around. I know of a dairy a few miles from my place that has a wall of drums at the back of his free stall barn as tall and wide as the barn and probably ten barrels deep. I'd say there's a few hundred at that farm.

    • @ShoreGarage
      @ShoreGarage  2 роки тому +1

      @@twistedpixel2558 I’ll definitely call around. Thank you!

  • @vhenzlifevlog9453
    @vhenzlifevlog9453 2 роки тому +1

    Soon if i return to my province i create like this boat

    • @ShoreGarage
      @ShoreGarage  2 роки тому

      You should! It is loads of fun!!!!

  • @haydend1926
    @haydend1926 3 місяці тому

    Do u have blue print or something with measurements

  • @roberttiffany5896
    @roberttiffany5896 2 роки тому +1

    Do you have to get it registered??

    • @ShoreGarage
      @ShoreGarage  2 роки тому

      Not yet there a few more safety things I need to add to it in order to pass safety here in New Jersey

  • @vmk5697
    @vmk5697 3 роки тому

    How much weight will that hold?

    • @ShoreGarage
      @ShoreGarage  3 роки тому

      I am entirely sure. But It holds a lot!

    • @daisystabs5502
      @daisystabs5502 Рік тому

      Asuming they are 200l barels and he has 8 total it can hold 1600kg, but u dont want those things to be completely under water so probably like 1000KG

  • @naufalardhani7401
    @naufalardhani7401 Рік тому

    saya juga sudah membuatnya

  • @GregoryWillTwitch
    @GregoryWillTwitch 2 роки тому

    DID SOMEONE SAY TACOS? I will never say no to a taco 🌮 💛🤎💚🧡

  • @jeffthompson3529
    @jeffthompson3529 3 роки тому +1

    Their precut studs 92-1/2". When you add your bottom plate and two top plates you'll come out to 8'

    • @emeraldfox7175
      @emeraldfox7175 5 місяців тому

      Lol does he look like he's building walls 😂

    • @johnbarichello8284
      @johnbarichello8284 3 місяці тому

      Thanks my carpenter buddy and i was thinking the same thing

  • @adenamsekian5279
    @adenamsekian5279 2 роки тому +2

    Should be able to upgrade your video.
    I'm suggesting you that the working part should be more than verbally video.
    The viewers are more understanding by looking the stage by stage of your works.
    I'm so sorry for the inquiry
    Please bet my pardon.
    Good luck forever.

  • @williamjakobek6866
    @williamjakobek6866 2 роки тому +2

    As Jeff Thompson correctly notes, the wood you bought is sized for 8' wall framing.
    These should not be called 8'. There is a correct name in the carpentry trade. They are called studs. Unless you plan on framing some 8' wall somewhere? Take them back. You bought incorrectly labelled merch.

    • @ShoreGarage
      @ShoreGarage  2 роки тому

      Yes you are right I did. But all is well, I ended up making it work!

  • @vicmakaroff5364
    @vicmakaroff5364 Рік тому

    what's with the loud noise

  • @GeorgeHoward-vc4gf
    @GeorgeHoward-vc4gf Місяць тому

    IT WASN'T LOWES MISTAKE... YOU PURCHASED PRECUT WALL STUDS INSTEAD OF 8 FT. 2X4 'S . .. HONEST MISTAKE

  • @stanleywatson8219
    @stanleywatson8219 3 роки тому

    You shouldn't see my boat

  • @rickyelvis3215
    @rickyelvis3215 7 місяців тому

    relax with the 🎶 wtf?

    • @ShoreGarage
      @ShoreGarage  7 місяців тому

      Rock an roll!

    • @rickyelvis3215
      @rickyelvis3215 7 місяців тому

      a genuine contender for worst (mismatch) soundtrack on YT in 23.. it’s not a supersonic jet boat.. so chill 🎶

  • @aggabus
    @aggabus Рік тому

    Devil worship noise

  • @Goodellsam
    @Goodellsam Рік тому

    Music is awful, it makes it hard to watch this.

  • @michaelminga4035
    @michaelminga4035 27 днів тому

    Very annoying music.

  • @denniswilkins4514
    @denniswilkins4514 Рік тому

    Wanted to watch but the irritating rock and roll ruined it. Why can't you just make a video in a normal way.

    • @ShoreGarage
      @ShoreGarage  Рік тому

      All you have do is mute the video 🤷🏽‍♂️