Man that's a beautiful 1973 mach one i own a 1971 mach 1 mustang it's left hand driver i am putting a aftermarket big block in mine are an aluminum big block ford 632cid 871 supercharger i just got to start building it!!!!!!
Thanks..the rear tyres are 295 50 15 with 15 x 10 wheels about 6 inches rear offset.. 6 inches inside dish 4 inches out in other words..they fit well with a little bit of room to spare no rubbing on wheel arches.
@Kayobear19 Yes i agree the engine was very under powered it was built for the owner by another engine shop in his part of town. Unfortunately the engine shop did a poor job with a tiny camshaft and poor flowing cylinder heads, the result was the engine did not perform as the owner wanted. So after discussing with the owner, I replaced the camshaft upgraded the cylinder heads now ( CHI ) changed the manifold and carburettor resulting in a increase in rear wheel power from 280 rwhp to 448 rwhp..with the same short block apart from a bigger hydraulic flat tappet and top end induction.
Man that's a beautiful 1973 mach one i own a 1971 mach 1 mustang it's left hand driver i am putting a aftermarket big block in mine are an aluminum big block ford 632cid 871 supercharger i just got to start building it!!!!!!
I think that the MACH 1 1973 is the most beautiful car!
Late 60s and early 70s cars were just something else , damn shame Made in America aint what it used to be.
Hello, you mustang is very beautiful, congratulations!!, can you say me the size of yours tires and wheels??, im restoring a mustang 1973, thanks!!
Thanks..the rear tyres are 295 50 15 with 15 x 10 wheels about 6 inches rear offset.. 6 inches inside dish 4 inches out in other words..they fit well with a little bit of room to spare no rubbing on wheel arches.
That spoiler...
0:14
351c?
well it is a factory 351 cleveland car..but now has a 408ci cleveland with CHI 190cc heads and a streetable hydraulic camshaft 448 rwhp.
@@boss9coupe kinda figured lol but ppl do alot of swaps these days.
@@boss9coupebeautiful 73
What's your rear end gearing ??
Nice car but one thing are you using your real name on your channel.
Custom build ?
Obviously you didn't
include the engine !
WEAK
@Kayobear19 Yes i agree the engine was very under powered it was built for the owner by another engine shop in his part of town. Unfortunately the engine shop did a poor job with a tiny camshaft and poor flowing cylinder heads, the result was the engine did not perform as the owner wanted. So after discussing with the owner, I replaced the camshaft upgraded the cylinder heads now ( CHI ) changed the manifold and carburettor resulting in a increase in rear wheel power from 280 rwhp to 448 rwhp..with the same short block apart from a bigger hydraulic flat tappet and top end induction.
0:28