U.S. General 5 Drawer Tool Cart Tour - DIY Mechanic and Modifications (Full Setup for Under $1500)
Вставка
- Опубліковано 13 жов 2024
- Full tool cart tour. Entire setup with tool cart was under $1500! Pittsburgh, Gear Wrench, and Ryobi. Mostly work on BMWs. Tool links below.
Some repairs and modifications I have done with this setup:
Front and rear brakes on 2007 BMW 135i
Valve cover gasket on BMW 2007 135i
Spark plugs and coil packs on 2007 BMW 135i
Down pipe install on 2007 BMW 135i
Down pipe install on 2012 WRX
Dinan intake install on 2017 BMW M240i
Front brakes on 2009 BMW 335i
Hardwire radar detector on 2013 BMW 135i
Valve cover gasket on 2006 BMW 325i
Intake install on 2013 Cadillac CTSV
Real Steel Hammers:
amzn.to/3H0xbOW
amzn.to/47aat1z
Klein Tools 2-Piece Set:
amzn.to/3RAQKCl
GEARWRENCH 1/4" Drive 72 Tooth Quick Release Locking Flex Slim Head Ratchet:
amzn.to/3NKTegq
DURATECH Flex-Head Double Box End Ratcheting Wrench Set, 7-In-1 Metric Wrench Set, 8-19mm, 72 Tooth Gear, CR-V Steel, with Tool Organizer:
amzn.to/3TDudr6
NEIKO 04300A E-Torx Socket Set, 14 Piece, External Torx Socket, E4 to E24, 1/4”, 3/8” and 1/2” Drive, Female Star External Torx, Inverted Torx Socket Set, Cr-V Steel:
amzn.to/3S1R9iM
NEIKO 02433A 3/8” Drive Standard and Deep Metric Impact Socket Set | 26 Pieces | Metric 7mm to 19mm | Premium Cr-V Steel | 6-Point Hex Design | Corrosion Resistant Black Phosphate Coating:
amzn.to/3TCvaQn
Reniteco Socket Organizer Drive ABS Tools - Black Socket Holder, Premium Quality 6 Pieces Socket Holders Kit 1/4-Inch x 32 Clips, 3/8-Inch x 30 Clips, 1/2-Inch x 24 Clips:
amzn.to/3tqUfDs
ERNST Bit Boss - Premium 1/4 inch Hex Tool Bit Organization Solution for Toolbox, Fits 90 Long and Short Bits:
amzn.to/3RX6O2u
This was one of the best toolbox tours on UA-cam. Either you see these guys who boast about spending $100k on a toolbox or another group that spends $10's of thousands, only because their UA-cam channel pays for it or they've got too much money to waste! This was a real person's toolbox. Thank You!
Thank you!!!
Really appreciate you taking the time to share your set up with a newbie!
My pleasure!
I have a lot of Ryobi cordless. But for the smaller size cordless ya can't beat the M12, my 3/8 stubby fuel impact is worth its weight in gold. I use that more than any other tool. Good luck!
I have neiko tools as well (impact sockets) that have lasted for 6 years of daily use. Those real steel hammers are nice too
Right on
You need to upgrade to the ryobi HP. That p262 and the high torque impact wrenches are very good. And the extended reach ratchet is a beast. Need the hp batteries with the impacts though.
All of this 1500 bucks includin the box man??? Wow that’s awesome!
Nice set up brother! Thanks for the vid!
Thank you for this I too have a mess of random tools, and gifted more from harbor freight. Using tote bags from cable company for some of them. Work on 2 vehicles myself. Had the built cart for 2 years, and still use the bags.
Thanks for the tour
You are very welcome!
Cute! Lil Dude is so proud of his tools. 😎
Thanks!
Nice diy setup!
Thank you!
Hell yeah glad to see you can get a lot for 1500. I’m looking at 2015 bmw M235i
Man I paid 1500 for 3 power tools with 2 batteries and a charger brand new off the snappy truck, 6 months later left the trade. But hey there awesome tools so I’m not too upset 😂
And that’s why I stay off the truck 90% of the time
Get rail roaded by them price wise just because the name and where it’s made then years later you either leave or sell and get barely 35% return when you sel
I think he did pretty darn good.
Those are not cheap tools, just inexpensive. Big difference.
I think you would have been happier with Milwaukee, just b/c of the battery platform support. $1500 gets you a lot of power tools anywhere else.
Any Milwaukee tool beats any high-end snappy tool ! wasted money sorry for you
Yikes I got all my tools from harbor freight and Walmart. I still left the trade though about 6 months after
Hell yea keep up the great content!
Thank you! I will do my car detailing cabinet next!
Nice set up
Nicely done. Your cart looks a lot like mine except yours is a lot better organized. Hoping to get mine a organized similar to your except I will be switching the wrench drawer and hammer drawer with mine since I have a lot more wrenches. Nice setup and thanks for sharing!
You are very welcome! I need to find a better solution for my wrenches. I might get some magnets and mount them to the inside of the lid.
Sweet setup, thanks for the organization inspiration. I noticed your sockets are upside down on the organizer
Thank you! I think they can go either way, but I might flip them and see how I like it.
@@ConwayAutoSpa yeah I think they can, they slip down further if you flip them. It just makes it a little easier to see the size but I guess it’s personal preference
Nice setup! I almost went back to Ryobi because I had so much luck with them when they were still dark blue. I decided to go with Bauer because HF is just down the road and HD is an hour round trip.
I don't think you can go wrong with either brand!
Goals right here all my stuff is harbor frieght ryobi but im using the walmart packout style tool boxes
US general 5 drawer tool carts got on sale sometimes. I got mine for $189. Best bang for buck out there.
@@ConwayAutoSpa I'll get one eventually just living in an apartment, walmart boxes are more mobile for me right now able to wheel them down to my car split them up in the hatch and take them to my parents, my dads useless with cars lol
Good job, Brother. I also subscribed!
Thank you! Lots more videos to come!
Nice cart; what you using to organize sockets
Harbor Freight trays and these: amzn.to/4bbvwUy
Did those Pittsburg screwdrivers (the set) come with that tray or you bought it? If so, can you drop a link where you got that? Thanks for sharing man, you have a nice well put together tool cart.
amzn.to/44VcPlc
@@ConwayAutoSpa Thanks man! I just got my tool cart last week and I find my self in the garage every night after work messing with it.
Where’d you get the bins for the extensions?
Where did you get the bins that the extensions are in. Trying to find 2 to put in my cart aswell!
Here you go...amzn.to/3U7FLD8
Brother…turn your sockets upside down. Much easier to see the numbers and they are built to receive the top portion at the base.
Thanks for the tip
Was coming to say the same thing. Like. The socket organizer sockets are upside down! Lol.
A power rachet shouldn't be torque, breakit loose and torque it by hand that's how there supposed to be used
Bro called Klein junk screwdrivers lol
Nah I think he said he used to have junk right after he said his were Kline. Like now he has kline used to have a bunch of junk. Could be wrong, dunno.
It feels like a quality tool but it was 20 dollars… so it’s fucking junk
It feels like a shitty tool but it was 200 dollars... so it's fucking amazing
@@mvrphh7514 is that what was said?
@@mvrphh7514😂
It's a damn socket !!! 🤣🤣🤣
Noce job on the organization, what brand are those plastic organizer trays?
amzn.to/3vhUDEK