I am praying for Julie to have a full recovery from her cancer. Don't know what kind it is but I am praying for you. I lost my wife to ovarian cancer about 5 and a half years ago. She fought for 4 years after she was diagnosed and I feel blessed that I was able to be there with her for every doctor visit, every procedure, every treatment and any everything else. I don't know how to state the sense of loss when she passed away. I hope that you never have to go through that. I have friends who's wife's and girlfriends have gone through cancer of some kind. I know a breast cancer survivor and an ovarian cancer survivor. I am hoping and praying for you to come through this fine and healthy as you can be.
Got an idea for you: put a second axle on the trailer, forward of that one. Get a second bed, graft the two beds together to have the dual wheel wells. Will give you plenty of material to extend the bedsides the full length of the trailer. Will also give plenty of load capacity. Most importantly, I think it will look slick. What you got going looks good, just my thoughts. Glad Julie is doing well, praying for her continued recovery.
Above all else we're so glad to see Julie up, out and about. She's looking great! Rat Stock or Not, great work guys, have fun and relax a while, you two deserve a break 🤠👍
My prayers go out to y'all l have lost my mother to cancer she fought it 4 times and the 5th time at 84 she would not take the treatment told her doctor al her friends were long gone and she was ready for the Lord to take her to heaven never give up Julie you are a strong woman, also lost a brother, and my sister survived her cancer and her daughter is now cancer free so I know first hand what you're family is going through.GODBLESS y'alls
Thoughts and prayer for you Julie, hoping for a quick recovery. My daughter had breast cancer just over a year ago and she cancer free now! God speed! The truck and trailer is looking great hope you can get it on the road! Good luck!
Another great show . First I was very happy to see your wife in the back ground working on I believe a seat then to see her after surgery up and moving was worried haven't seen her the last few programs one cancel survivor to you stay strong don't give up. And keep moving forward. Praying for you. Now about your project really like the way you are going. And want to thank you for the laugh I got when a friend showed up with the shirt with the saying ( I know nothing) I enjoy that ( Colonel klink) I would wear that with pride. Watching from trona California.
Another cracking film! I have really enjoyed following the progress on the truck, Good Luck getting it finished and best wishes to Julie, We’ve been there, wife had the big C, surgery 12 years ago, still hanging in there…..all the best from the UK!
I will be keeping Julie in my thoughts and prayers and it was great to see her in the shop. Take care and thank you again for sharing your build video.
It's looking good so far. It's also good to see the wife out and about already. Just don't push too hard to soon. Take care of her, Anthony, and have a great and safe trip. Thanks for dragging us around with you to let us see what's going on.
So glad to hear that Julie is doing well, know that she and you will continue to be lifted up in prayer. Praying that recovery will be quick and that God would grant her strength to get back to doing what she would like to be doing instead of nurturing her health. Praying that God would give her the health and energy back. To God be the glory! The trailer build is looking awesome can’t wait to see the two together! (With stacks on the mega cab!😉)
Well things are coming along to the grind to get it done . Julie you take it easy I know it’s hard for you just to be sitting around but it’s for the best right now . We are all still praying for you. And Anthony save travels to you .
Hi Julie,I'm thinking good thoughts about your recovery, stay strong 💪! Anthony really like your design and craftsmanship! Connor you're doing a great job !
Prayers and Love to you Julie. you a strong women and motivation to others thank you and speedy recovery...Consider using the channel as a medium to create A Go Fund Me ,Either for yourself or a Hospice in your area for those who cannot afford appropriate treatment...Just an idea
What a cool idea. Much like an artdeco error tractor trailer. I think some people are still looking at the pickup bed as a bed and not realizing it is skirting.
Cut the fenders in thirds and take the center third out and weld it up that way you will have your fenders and I think you have a great idea on the rails by notching the top of the bed rail
you already have to fix the tailgate, why not widen it by 6 inches so the wheels tuck, That would also help with the width issue. Assuming that that width would match the cab anyway. Much love to you and Julie.
Well I will be waiting for the next great episode. From . Hard core fabs..... Hopefully from rat fest..😅...keep at it Anthony....I'm rutting for ya man...👍😎💯
Just an idea, you could make the deck a universal width and have a pop out for where the big tires hang over the edge of the deck. They do that hauling big agriculture equipment like combines and sprayers on those RGN trailers.
Ya that was my first guess after I've already had exactly that issue after already spending hours & days guessing &/or just replacing Blown Head Gaskets, Cracked Heads, Bad Thermostat, Thoroughly flushing out then replacing Radiator, Fan Clutch,,,,,,
I would notch the cross bar over the chassis @ and set the bedsides on top, and use the stake pockets to bolt the bed sides to the cross bar ,make the top of the bedside the finished height of the deck and run the decck wood aganst the bed side and level with the bed side
I could but like I said in the video Old Crows tires already hang off like it is. If I did what you are talking about there would only be 4 or 5 inches of the 17 inch wide tire on deck of the trailer the rest would be hanging off the side.
Why not use a standard 8 lug trailer axle from a goodness trailer... it would still give you the 8 lug wheels, but give you the wider stance youre looking for, and you can still use your existing air suspension setup... just a thought.
Afternoon I am from Texas and I am watching every video of this build amazing. I have a question for you in the this video your wife is working on the trucks 60/40 bench seat covers are those new if so were did you get them . I my self have a 1991 r3500 and I am replacing my seats but with split 60/40 but I need covers the ones I have are shoot . Amazing truck and trailer build 👍🏽💯
These were original, and because of that, they had a bad tear across the top. The back and the foam are also in rough shape (starting to rot). The plan was to make custom seats, but time got away from us. So, I did my best to patch them up for now. Hopefully they hold together!
I am praying for Julie to have a full recovery from her cancer. Don't know what kind it is but I am praying for you. I lost my wife to ovarian cancer about 5 and a half years ago. She fought for 4 years after she was diagnosed and I feel blessed that I was able to be there with her for every doctor visit, every procedure, every treatment and any everything else. I don't know how to state the sense of loss when she passed away. I hope that you never have to go through that. I have friends who's wife's and girlfriends have gone through cancer of some kind. I know a breast cancer survivor and an ovarian cancer survivor. I am hoping and praying for you to come through this fine and healthy as you can be.
🙏my condolences on your loss
@@ThatRustLife thank you
Your wife is doing great I hope! God speed on her recovery,praying for you both.
Got an idea for you: put a second axle on the trailer, forward of that one. Get a second bed, graft the two beds together to have the dual wheel wells. Will give you plenty of material to extend the bedsides the full length of the trailer. Will also give plenty of load capacity. Most importantly, I think it will look slick.
What you got going looks good, just my thoughts. Glad Julie is doing well, praying for her continued recovery.
I have faith that you are already on your way! I'm glad that Julie is healing up and looking good! My prayers are with you for a speedy recovery! Mike
Thanks Mike!
@@ThatRustLife you are very welcome!
So glad to see Julie on her feet. Continued prayers for good health and strength. That trailer looks sick. You are a sheet metal God.
Above all else we're so glad to see Julie up, out and about. She's looking great! Rat Stock or Not, great work guys, have fun and relax a while, you two deserve a break 🤠👍
Thank you 😊
My prayers go out to y'all l have lost my mother to cancer she fought it 4 times and the 5th time at 84 she would not take the treatment told her doctor al her friends were long gone and she was ready for the Lord to take her to heaven never give up Julie you are a strong woman, also lost a brother, and my sister survived her cancer and her daughter is now cancer free so I know first hand what you're family is going through.GODBLESS y'alls
🙏thank you
@ThatRustLife no worries y'all will always be in my prayers
Trailer looks great ! Sending prayers to you Julie! God Bless you!
Thank you Loren
Looks really Kool Antony Nice work And sending prayers and hugs Julie
Thanks John!
Thoughts and prayer for you Julie, hoping for a quick recovery. My daughter had breast cancer just over a year ago and she cancer free now! God speed!
The truck and trailer is looking great hope you can get it on the road! Good luck!
🙏thank you
GREAT to see you on your feet Julie!! Still have you in my prayers. p.s. the rig looks awesome.
Thank you!
It's going to be a sharp truck when it's finished I'm glad you're wife is doing good
Good luck to you Julie in your recovery & good luck to you Anthony in finishing your project
Thank you
Glad to hear you’re doing well Julie
Thank you
Trailer looking good Anthony. Nice to see Julie up and out. Had cancer in 2016, had robotic surgery in January 2017. One day at a time. 🙏🙏🙏
Keep a positive attitude, Julie !!!
Almost at the finish line, hope you got that antifreeze problem sorted.
Good to see Julie by your side and stopping in the shop already 🙏
Thanks for making. Praying for Julie
Another great show .
First I was very happy to see your wife in the back ground working on I believe a seat then to see her after surgery up and moving was worried haven't seen her the last few programs one cancel survivor to you stay strong don't give up. And keep moving forward. Praying for you. Now about your project really like the way you are going. And want to thank you for the laugh I got when a friend showed up with the shirt with the saying ( I know nothing) I enjoy that ( Colonel klink) I would wear that with pride. Watching from trona California.
You give yourself all the time you need to heal, Julie. We'll keep following along and pullin' for you both.
Thanks!
Thank you so much!
Another cracking film! I have really enjoyed following the progress on the truck, Good Luck getting it finished and best wishes to Julie, We’ve been there, wife had the big C, surgery 12 years ago, still hanging in there…..all the best from the UK!
Really looking good Anthony! Great news about Julie!!! Have a great trip!!!
I will be keeping Julie in my thoughts and prayers and it was great to see her in the shop. Take care and thank you again for sharing your build video.
It's looking good so far. It's also good to see the wife out and about already. Just don't push too hard to soon. Take care of her, Anthony, and have a great and safe trip. Thanks for dragging us around with you to let us see what's going on.
Thanks for following along
So glad to hear that Julie is doing well, know that she and you will continue to be lifted up in prayer. Praying that recovery will be quick and that God would grant her strength to get back to doing what she would like to be doing instead of nurturing her health. Praying that God would give her the health and energy back. To God be the glory!
The trailer build is looking awesome can’t wait to see the two together! (With stacks on the mega cab!😉)
Well things are coming along to the grind to get it done . Julie you take it easy I know it’s hard for you just to be sitting around but it’s for the best right now . We are all still praying for you. And Anthony save travels to you .
I think the trailer has really turned out awesome well built very well built prayers for your wife still I hope she feels better
Glad your surgery went well Julie wishing you & Anthony A smooth road form here. The truck is lookin cool
get well soon Julie and I did see you sewing the seat in the background. ❤
OUTSTANDING 💯 I think on the truck you should ____ _____ __ and the trailer you should _____ __ ____ !!!! Glad Julie is on her way to recovery !!!
Good luck on the surgery, I hope recovery isn’t too hard.
Hi Julie,I'm thinking good thoughts about your recovery, stay strong 💪! Anthony really like your design and craftsmanship! Connor you're doing a great job !
Julie god bless and god speed ;
Have faith and you’ll get the truck and trailer there if if its not painted you will have a kick ass rat rod tow rig
Prayers and Love to you Julie. you a strong women and motivation to others thank you and speedy recovery...Consider using the channel as a medium to create A Go Fund Me ,Either for yourself or a Hospice in your area for those who cannot afford appropriate treatment...Just an idea
Julie we are thinking of you nice to see you love you guys
Thank you 😊
Best of luck Julie
Bad to the bone...thanks for sharing those tunes.Julie...sending that white light.yall are the most creative team on the planet.
We pray you have a full and speedy recovery, God bless you, 🙏🙏🙏 Aman
Great video and I also am a cancer survivor and know you will beat this and heal quickly ,God bless you!
Glad surgery went well, trailer is looking great, thanks for sharing, all the best to yous and your loved ones
praying for Julie keep the build going
LOve the work! Your on the right track Carry On! All the best and best wishes to the Bride!
Best of luck. Continued thoughts and prayers on your recovery Julie. I agree there is way to much cancer. It has hit my family hard. Take care.
🙏thank you
keep up the good work counting to pray for y'all
What a cool idea. Much like an artdeco error tractor trailer. I think some people are still looking at the pickup bed as a bed and not realizing it is skirting.
Give her a big hug, that is always good medicine, hope to see you saturday
Glad her recovery is going well so far
Wow.nice truck
Accu ride 29015
19.5 Steely‘s are 8 bolt I run them on my Square body’s
good luck Julie. Fingers crossed.
Ratstock2024 truck looks good to bad gas tank isn’t bigger 😂❤😅😊 Brent
Praying little lady git well soon amen
Keep your thoughts positive and all prayers to both of you.
Great video, may God bless you and your loved....
God Bless you Julie on your journey and nothing but best wishes!!!!
The best to both of you 🙏 keep the faith
Wishing you the best Julie.
Thank you
Great to see Julie up and about
Prayers for Julie, i would have cut holes in the frame to slide the cross braces through to keep the top of the frame and the top of the bed level.
Prayers for you Julie God bless
Thank you
God bless you 🙏 ❤️
Thank you
🙏 from Siesta Key Florida
Still praying for you guys, wishing you a full recovery.
Yea Julie!!!! Prayers
Best wishes. Prayers
I know there's great fabricators out there but never forget it's your build.
Praying for you julie god is with you and we are all with you as well ❤❤ much love stat strong
so so glad all went well thanks for sharing when you have so much going on
Prayers for Mrs Julie
It’s looking good. Another great video 👍👍
Hugs for Julie
Hi 👋 from Chertanovo Chopper’s Custom Club …..
Moscow City 🌆 …..
Russia 🇷🇺 …..
Trailer looks cool like it is
Cut the fenders in thirds and take the center third out and weld it up that way you will have your fenders and I think you have a great idea on the rails by notching the top of the bed rail
It looks like an international scout in the back now.
you already have to fix the tailgate, why not widen it by 6 inches so the wheels tuck, That would also help with the width issue. Assuming that that width would match the cab anyway. Much love to you and Julie.
Hang in there julie ❤🙏
Looking good!
I used pallet racking for my trailer and inset tongue and groove car decking for the deck.
Super cool build, like you vision
Prayers
Well I will be waiting for the next great episode. From .
Hard core fabs.....
Hopefully from rat fest..😅...keep at it Anthony....I'm rutting for ya man...👍😎💯
Looking good
You can build the sleeper later . I think it will still look good
Julie you look good after surgery
I'm diggin it!
Just an idea, you could make the deck a universal width and have a pop out for where the big tires hang over the edge of the deck. They do that hauling big agriculture equipment like combines and sprayers on those RGN trailers.
True
I was going with the rendering. Kind of like a low boy. But i get it. Prayers to the mrs on the speed bump.
wish you a greatrecovert youook good and hope algo's good in temission tygreat vidio
Praying for both of you
Check fins on water pump may be gone that will cause that no water flow just a guess
Ya that was my first guess after I've already had exactly that issue after already spending hours & days guessing &/or just replacing Blown Head Gaskets, Cracked Heads, Bad Thermostat, Thoroughly flushing out then replacing Radiator, Fan Clutch,,,,,,
First iv herd about Julie..😢....man I hope all goes well for you Julie...👋,,,,,
That shop looks awesome. Old building? I also love the project.
Yeah the building is form 1908
I hope for a fast recovery for Julie.
I would notch the cross bar over the chassis @ and set the bedsides on top, and use the stake pockets to bolt the bed sides to the cross bar ,make the top of the bedside the finished height of the deck and run the decck wood aganst the bed side and level with the bed side
I could but like I said in the video Old Crows tires already hang off like it is. If I did what you are talking about there would only be 4 or 5 inches of the 17 inch wide tire on deck of the trailer the rest would be hanging off the side.
Why not use a standard 8 lug trailer axle from a goodness trailer... it would still give you the 8 lug wheels, but give you the wider stance youre looking for, and you can still use your existing air suspension setup... just a thought.
Sending prayers
Afternoon I am from Texas and I am watching every video of this build amazing. I have a question for you in the this video your wife is working on the trucks 60/40 bench seat covers are those new if so were did you get them . I my self have a 1991 r3500 and I am replacing my seats but with split 60/40 but I need covers the ones I have are shoot . Amazing truck and trailer build 👍🏽💯
These were original, and because of that, they had a bad tear across the top. The back and the foam are also in rough shape (starting to rot). The plan was to make custom seats, but time got away from us. So, I did my best to patch them up for now. Hopefully they hold together!
I think the ones that are complaining about nothing are the ones who want to skip to the 12:00 mark to "avoid the talking". Just sayin...
Are you oing to put a motor on the jack or how are you going to run it up and down
🙏🏻🙏🏻🙏🏻