1947 ford Rat Rod build!
Вставка
- Опубліковано 25 лют 2023
- Check out this incredible kustom build! This is Old Crow, a 1947 Ford rat rod. This classic hot rod is a must-watch for any rat rod enthusiast! What started out as a salvage yard Cinderella, this build has turned into an amazing, one of a kind, rat rod. From the start, I had a vision for this classic Ford, which has now been successfully brought to life. Thanks for following along with this fun custom build. For more details, be sure to check out the entire build series here on this playlist.
Thank you to our sponsors that helped a ton along the way:
Performance Distributors: performancedistributors.com/ for the D.U.I. distributor
Steele Rubber Products: www.steelerubber.com/ (@SteeleRubberProducts ) for all the window and door trim.
and thank you to Vern Hinkle for cutting and installing all the glass, Steven for the awesome Raven head, and Brady Scott (@bradycreativeart ) for the beautiful paintwork.
And thank you for all the support of our subscribers, your encouragement throughout this build has helped more than you will ever know!
🔔 Subscribe for more / hardcorefab
Visit our website: www.hardcorefab.com
Visit our TeeSpring Store: hardcore-fab.creator-spring.com/
Thanks for watching!
#hotrod #ratrod #ratrodbuild #fordtruck #custombuild #kustom #oldcrow #hardcorefab @hardcorefab @SteeleRubberProducts @bradycreativeart - Авто та транспорт
Always wanted to do a rat build with my brothers. Sadly two have passed away. We just never got our chance. RIP Dan n Lloyd.😢
Sorry for your lose.
Sorry to hear it! You can do one in their honor still! Im watching this cause its similar to how I wanna build my 46
Wonderful build! Amazing engineering! Cannot fault any of the work done. However, I am one of those who does not quite understand putting in that sort of engineering, time, and money but leaves it looing like some sort of backyard build that ran our of funds and skill when it came to the body, etc. I am just one of those few who loves to see a sharp looking vehicle after that much work. Leaving it look like an ancient old car that someone just threw a new engine in does not do it justice, in my opinion. To each his own.
I have a 46 Ford ratrod, and I could not pull away watching this, just incredible and this is exactly the kind of stuff Im wanting to build
Glad you liked it
Beautiful metal finishing. Great side impact strength. Cleaver suspension.
Thanks 👍
Damn sano ride . I’m too tore up to build these anymore ! Do enjoy watchin builders with the enthusiasm. Never compromise !
Parabéns pelo lindo carro que vc construiu, assisti esse vídeo aqui do Brasil e fiquei admirado pelo seu trabalho. Parabéns.
Giving new life to something that was dead. Beautiful.
Bella is a good Name for her. Wish her all the Best.
For sure!! This build is amazing. You really put a ton of like “shoot from the hip” designs on it and still kept with the era of the original truck!
Thanks!
Very very impressed with your craftsmanship. Well done for sure
Thank you very much!
True art comes in many forms. The good old American rat rod is a work of beauty. I watched this entire video and was taken with every scope of this build. Excellent job brother. You gentlemen are indeed masters of your craft !!!
Wow, thank you!
@@HardCoreFab dude, I want to shake your hand! But I live in Kansas City !!! Lol
Definitely some talent there! Not a big rat rod guy although the original rat rods were kid of cool. Nice work.
Thanx for Sharing your experience with building your Hot Rod, very impressive
Have a Great Day 👍
God Bless America 🇺🇸🙏🇺🇸
Very cool 😎 Heather's homemade very great job 👍👍👍👍👍
Konstruktion und Ausführung deines Projektes aller 1. Sahne. Ich kann dich nur gratulieren. Sehr schöne Arbeit.
awesome work! I'm building a 38 ford pickup rat rod similar style. I just got a bunch of good ideas watching your videos. Thank you and keep up the great work!
Glad to help and thank for watching!
Love your dedication to curves and angles other that 90 degrees. Mike
I need someone like you to help this old disabled USMC VET out and help me with the little truck I’m working on. It just hard with my disability to do to much at a time. Love it your build is amazing and awesome ❤❤❤❤
@ 42:15 nice work! This guy has a deep skill set. Excellent.
Thanks!!!
You are welcome 🙂
Excellent job Anthony looks KILLER KOOL
That's one hell of a workbench
Wow! Awesome job like always!!
Thank you!
That is a cool rod if i ever seen one. Great build. You Sir are a true artist.
Thanks man!
Du bist einer der Künstler, die ich verehre!! Eine Wahnsinnsarbeit. Leider lebe ich im f... Deutschland, in dem es TÜV gibt und es NIE zulassen würde, wenn man ein Auto selber baut. Und wenn, dann nur mit allen möglichen Pr4üfungen und GELD! Aber dennoch: ich bin schwer begeistert!!
Construction and execution of a first class project. I can only congratulate you. Very good work.
Thank you very much!
Excellent video,thank you for sharing your knowledge!!
My pleasure!
One of the coolest rat rod builds I’ve ever seen in person. So proud to have been a little part of this project too. Keep pushing and building 🖤
Thanks man! We are proud to have a some of your work mixed with ours!
❤j gg😅
Hallelujah Brother! You're about the third person in my lifetime that solder on the Copper Lugs to the wire for batt cables! Them Zoomies! : )🖖
This was a true to watch this build to Fruition !
Congratulations from Spain!! Very nice!!!
Sweet! 👍👍 That was cool to watch it get built from the ground up. Totally Cool 😎
Thanks 👍
@@HardCoreFab your welcome. Turned out SWEET! 👍👍
You are One hell of a Fabricator, Amazing build
Thank you frank!
Nice work, thanks for sharing it with us
You bet!
Congratulations amazing work.
First and I love what you’re doing with RatRods it’s my dream and Bobbie
Thanks!
Hey Hi Hardcore Fab from here in the D Michigan hey the motor city 😅😊 thanks for your time and video of your Project 47Ford I enjoyed watching your Detail progression/ Build 🎉❤😁👍
Nice work. A man of many talents. Glad I ran across your channel.
Much appreciated! Glad to have you!
Enorme proyecto , felicitaciones un excelente trabajo,valoro mucho.el esfuerzo q realizó, saludos desde Argentina!
so awesome
Thanks!
Amazing work-
Muchas Felicidades Joven Por Su Canal.
Saludos Cordiales Desde Mazatlán, Sinaloa, México. ..
I usually fast forward and skip a lot of the video when watching a build. Not this time! Enjoyed it from start to finish in real time! Awesome job!
Thank you very much and thanks for watching!
Колосальная проделана работа. Смотрел на одном дыхании. Автору жирный лайк! 👍👍👍
Great build,nice music,awesome vid!!!!!!!
Very nice rat rod I love it it's very great 👍👍👍👍👍 you do great work
Nice job, great work
My brother and I are building a homemade Hot Rod out of odds and ends that is just laying around our farm and taking it on the Hot Rod Power Tour this year. Were putting a 63 Chevy C-10 cab that used to belong to the U.S. Forestry department on a 81 Oldsmobile custom cruiser wagon frame and using the 307 and THM 400 4 speed Auto transmission, were going to make our own bed using quarter panels from a 56 Plymouth Fury 4 door as the bed sides. The reason we decided to use the wagon frame is that it sits lower, the stock ride height of the 63 Chevy truck is 14 1/2 inches, the stock ride height of the wagon is 7 1/3 inches, were getting a 7 inch drop and didn't do anything to get it plus with being a newer frame and suspension it's going to be a smoother ride plus we will have disc bakes in front for better braking. Were also going to chop the top but were only chopping the front an inch and half so we can lay it down and the body has a rake to it. Were going to paint it Rustoleum Flat OD Green with the roof and trim in Rustoleum Gloss Black and were going to recover the Truck seat in Mochoa colored Canvas it it runs with our theme.
Sounds like a fun project
@@HardCoreFab and cheap.
EPIC !!!
Merry Christmas God Bless you both.
Same to you!
Good work done
Ótimo trabalho, você é um profissional altamente qualificado e o resultado foi maravilhoso.
Abraços do Brasil!
Thanks!
What a fast moves, wow wow wow i luv it
Another great 2nd channel entertainment, Loved the new trailer very kool.
THANK YOU SO MUCH!!! TOTALLY AWESOME FABRICATION SKILLS!!!! TOTALLY AWESOME BUILD!!!! TOTALLY AWSOME RAT ROD TRUCK!!!! TOTALLY AWSOME VIDEO!!!! THANKS FOR SHARING!!!! I LEARNED SO MUCH!!!! I LOVE MY RAT ROD FAMILY!!!!
Glad you like it!
Excellent build quality, great ideas too. Personally I would have fabricated top swivels for the front air suspension bags, they don't look happy with the top plate tilted sharply when the suspension is up.
Hi I am so pleased to have found your channel. You are very very talented fabricator, I will totally be looking in anticipation of your next project with you and your lovely wife and helps keep up the great work.♥
Thank you so much Maxwell for the kind words!
@@HardCoreFabWhat Engine Is In There ?
Awesome project.
Glad you like it!
Así es que se deben hacer los vídeos sin hablar tanto, Tremendo gracias, Continúas de esa forma
I thouroghly enjoyed watching your build, well done👍👍
Thank you!
A TRAILER QUEEN!
Hahaha
Out standing Work , It's good to see folks using older styling in Rods
WOW, you put a ton of fab work in!!! All that fab work put the Cool Factor in your ride!!! I never seen your builds till this one & I subscribed, Love it!!!!!!!!!!!!!!!!
Thanks a bunch! And I'm glad to have you!
I luv what u are doing, so nice, im from malaysia luv uolls creativeness awsomes
What a cute video and song. We are new friends just joined your channel! So happy we are friends. Thank you for sharing this cute video!
I give you five star ⭐⭐⭐⭐⭐ great work on the rat rod love to see it again and more
Thanks again!
Dude your so meticulous !! Increadable talent
Wow, thank you!
I have been looking for an old truck like a Diamond REO or something like yours to make my welding rig. I will have to put it on a 4x4 with maybe a cummins or an old combine diesel engine like a Perkins. Great video my friends.
That would be a fun build! I would love to have a Diamand T
Inspirador 👊🏻😎... Parabéns pelo ótimo trabalho 💥👍🏻
Deus os abençoe,seus vídeos são de excelência 👍😉👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷🇧🇷🇧🇷abraços na família 🇧🇷🇧🇷🇧🇷
Enjoy the rat rods while they're around like us.
Mad production 🇦🇺👌💯
Excelente trabajo
Felicidades
Grande mestre dos metais ,projeto incrivel,sem contar essa metaleira essa sonzeira,parabéns 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷🇧🇷🇧🇷abraço aqui do Brasil 🇧🇷🇧🇷🇧🇷paiz lindo,bonito por nataureza,e no controle de Deus:Deus renove suas forças e te dê a paz🎸🎧🥁
continue assim amigo parabens seus videos são muito bom show
Sweet ride !
Thanks!
@@HardCoreFab I subscribed
Super Arbeit. Sie sind ein Meister. *****
Looks GREAT
Thanks!
My Respect, Tremendous Works of Art❤
🙏GOD BLESS YOU 🙏
Thank you!
wow good work guys
Thanks
This earned a subscribe. Excellent music, and some amazing choices, style wise. Look forward to more. Cheers!
Thank you very much!
Excellent music? This is bad noise….
Caro amigo boa noite passei lhe dar os parabéns pelo trabalho vc é ninja ficou top esse ford rat
👍Der totale Wahnsinn. Meine Hochachtung vor dieser Meisterleistung.👍
Hey Anthony,
I thought I had followed the original build, but this video showed a lot that I had not seen.
Thanks
Work Safe, Be Well
Stay Warm
Good afternoon to you all
And to you sir!
fantastic
Браво,торчу от старых машин!
Awesome build!! Would love to see doodle drawings you may have done as a kid Your fabrication is Artwork 👍🏁🇺🇸
I never really doodled much when I was a kid but I built a lot of stuff!
A GREAT build . Thanks for sharing.
Glad you enjoyed it
Admire your work 😊regards from Tokyo 😊
Que show!!!!👏👏👏
Muy buen trabajo. saludos desde Bolivia
Masterful
Hermoso trabajo😊😊
I enjoyed your work.
Think you kindly!
Thanks for your vid 😇💟💟💟 Love and bless you guy, your a artist beautiful work 👍😁💪👌👏👏👏.
Thank you kindly
Very beautiful rat rod
Thanks 👍
Nice big effort.
Great car
Классно получилось!
Столько труда.
👍💥
Legend
nice video & nice work 💪👏
Thank you!