Self screed laying incl. height difference with the Staenis grid (with subtitles)

Subtitles:
1 How to lay scape yourself with an expansion joint?
2 Take 5 parts of sand ...
3 and 1 part cement.
4 Add water ...
5 and check the mix.
6 Divide the screed in the Staenis grid
7 Push the screed ...
8 and make sure the screed is above the grate.
9 Remove the excess screed above the grate.
10 To do this, drag on the slats of the grid.
11 Sprinkle screed over the level surface ...
12 and rub it flat with a large sanding board.
13 Top up where necessary ...
14 and create a nice flat screed.
15 Place the screed a little further than necessary.
16 Cut it nicely straight with a straight edge.
17 Polish the screed nicely flat with a scraping iron.
18 Install the edge insulation ...
19 and fix it with screed.
20 Place the grille close to the edge insulation ...
21 and fill it in with screed.
---
Install your own floor structure, perfect end result, no experience required.
The Staenis grille is a simple and robust self-assembly system for installing a high-quality floor structure, fillable with screed, insulation sheeting, drainage mortar or dry fillers, for indoors and outdoors.
Ideal for levelling floors on the ground floor (living room,...), upstairs (bathroom,...), in the attic (new living space) or outside on the terrace (on open ground or concrete ground).
More information: www.staenis.com
Good luck and see you soon!
Staenis

[@TheVinc150]

géniale

[@TweakBE]

Tom, geluk met ondertitels maar geen geluid bij deze video merk ik net :D

[@StaenisFloors]

We gaan dit inderdaad nog eens moeten upgraden ;)

[@angeloproietti8310]

Dove si comprano questi elementi in plastica grazie