Manual: Placement of the Staenis grid (with subtitles)

Subtitles:
1 How to install the Staenis grid:
2 Take slats and legs and click them together.
3 With screed and tileable insulating screed, occasionally leave a bar on the wall.
4 So your consumption is slightly lower.
5 With all other fillers, it is best to place the grid completely.
6 More battens = more places to screw on an OSB.
7 Measure the length to the wall.
8 Cut the bar to the correct length using a grinding disc.
9 You have the option to control a shortened height bar.
10 For extra strength you can connect the two side legs together.
11 Place 1 leg at the correct height.
12 Draw the line of the laser on a wooden beam.
13 Adjust the Staenis grid with a screwdriver until the pencil line and the laser line match.
14 This way you can easily and quickly place the grid flat.
15 1st click connection
16 Use the barb at the bottom to disassemble the connection.
17 2nd click connection
18 Push the barb in to disassemble the joint.
19 3rd click connection. Note: only click in 1 direction.
20 Push the barb in to disassemble the joint.
21 Sharpen a piece of bar to pass a utility.
22 Always leave a height of 1.5 cm from the bar.
23 Screw an extension leg into the standard leg to adjust the height to 13 cm.
24 Adjust the height by turning the extension leg.
---
Install your own floor structure, perfect end result, no experience required.
Laying your own floor structure is so easy with the Staenis grille
Measure your space and choose a filler, lay your Staenis grid and fill your floor. Ready!
The Staenis grid is a simple and robust self-assembly system for installing a high-quality floor structure, fillable with screed, insulation sheeting, drainage mortar or dry filler, for indoors and outdoors.
Ideal for levelling floors on the ground floor (living room,...), upstairs (bathroom,...), in the attic (new living space) or outside on the terrace (on open ground or concrete ground).
More information: www.staenis.com
Good luck and see you soon!
Staenis