Crawl Space Problem #3 - Insulation | Problems it Causes & What to Do

Поділитися
Вставка
  • Опубліковано 25 лип 2024
  • Michael's new book, "Crawl Space Repair Myths-Busted" is now available on Amazon! amzn.to/3llnB1m Week 3 of our Crawl Space Problems series and this week we're covering insulation. Do you need insulation in your crawl space? Could your insulation be causing more harm than good? Learn the answers to these questions and solutions to make sure your crawl space is properly insulated.
    [Products & Videos Mentioned]
    Top Crawl Space Problems Playlist • Top Crawl Space Proble...
    High Humidity Causes Wood Rot Fungus Video • Effects of Extreme Con...
    Winterize Your Crawl Space Video • Cold Crawl Space | Win...
    Ryan Carson's DIY Project Interview Video • Crawl Space Encapsulat...
    Best Insulation Methods for Crawl Spaces Video • Best Insulation Method...
    Insulbarrier Product Link diy.crawlspaceninja.com/insul...
    Rim Joist Insulation Product Link diy.crawlspaceninja.com/rim-j...
    Spray Foam Kit Product Link diy.crawlspaceninja.com/spray...
    Need a quote? crawlspaceninja.com/free-asse...
    Schedule a Consultation with Michael www.buymeacoffee.com/csninja
    🔴 Essential Guides to Crawl Space Encapsulation, Waterproofing, and Wood Rot Fungus crawlspaceninja.com/tag/essen...
    {Last 5 Video Links}
    1. Crawl Space Problem #2 - Standing Water • Crawl Space Problem #2...
    2. Crawl Space Problem #1 - Humidity • Crawl Space Problem #1...
    3. Aprilaire Whole Home Dehumidifier Install with New S86 Wifi Thermostat • Aprilaire Whole Home D...
    4. Crawl Space Cat Pee Smell Redo | Lexington KY • Crawl Space Cat Pee Sm...
    5. The Hydraway Basement Waterproofing System • The Hydraway Basement ...
    ---------------
    🔴 Popular Crawl Space Ninja Education Pages:
    crawlspaceninja.com/crawl-spa...
    crawlspaceninja.com/crawl-spa...
    crawlspaceninja.com/crawl-spa...
    crawlspaceninja.com/crawl-spa...
    crawlspaceninja.com/water-in-...
    crawlspaceninja.com/crawl-spa...
    ---------------
    Would you like us to provide a quote?
    🔴 crawlspaceninja.com/free-asse...
    ---------------
    Would you like to DIY your crawl space or basement?
    🔴 Purchase DIY Products - diy.crawlspaceninja.com/
    ---------------
    Start a Crawl Space Ninja in your area:
    🔴 Franchising - franchise.crawlspaceninja.com/
    🔴 Most Popular Video - ua-cam.com/users/embedvideose...
    🔴 Most Recent Video - goo.gl/H3QZtt
    🔴 SUBSCRIBE - goo.gl/NkXFkf
    ---------------
    Do you have a question for Michael Church and would like your question to potentially become a video?
    🔴 Ask A Ninja - crawlspaceninja.com/ask-a-ninja/
    ---------------
    Contact us:
    Crawl Space Ninja
    CrawlSpaceNinja.com/
    Mailing address:
    6011 Ridan Drive
    Knoxville, TN 37909
    (865) 659-0390
    Crawl Space Ninja Service Area:
    crawlspaceninja.com/service-a...
    Knoxville, TN
    Chattanooga, TN
    Nashville, TN
    Marietta, GA
    Alpharetta, GA
    Athens, GA
    Columbus, GA
    Augusta, GA
    Atlanta, GA
    Raleigh, NC
    Charlotte, NC
    Durham, NC
    Wilmington, NC
    Winston-Salem, NC
    Greensboro, NC
    Delaware
    Winston-Salem, NC
    Greensboro, NC
    Lexington, KY
    Columbus, OH
    Tennessee
    Georgia
    North Carolina
    South Carolina
    Kentucky
    Ohio
    Disclaimer - Please understand that the content on the Crawl Space Ninja UA-cam channel is intended for informational purposes only. We make no warranties about the completeness, reliability, and accuracy of this information. Any action you take upon the information posted on our UA-cam channel is strictly at your own risk, and we will not be liable for any losses and damages in connection with the use of our UA-cam channel.
    0:00 Introduction
    1:04 What Most Crawl Spaces Are Lacking
    2:42 Previous Videos
    2:57 Fiberglass Insulation
    5:38 Signs of Moisture
    7:16 Mold on Fiberglass Insulation
    8:45 Myth - Insulation and Mold Removal
    9:54 When to Remove Fiberglass
    11:23 Foundation Wall Insulation
    14:30 Types of Foundation Wall Insulation
    17:27 Can Vapor Barrier Replace Insulation
    18:58 Rim Joist Insulation
    20:45 Rim Joist Insulation Myth
    22:26 Proper Insulation Overview
    #CrawlSpaceNinja
  • Навчання та стиль

КОМЕНТАРІ • 63

  • @pleskbruce
    @pleskbruce 3 місяці тому +2

    Hey Michael, I've been watching your videos for almost 2 years now as well as those of others. You've made me realize things I'd never thought of before SO MANY times! I must say, without any hesitation, that you've got to be the #1 crawl space expert in the U.S. (shoot, maybe worldwide (seriously)!). Your information makes so much sense, is so thorough, and is easy to understand because you explain things so well - nobody else does all that anywhere near as effectively as you do. Your personality come through also, which adds credibility, and it's easy to see you are a smart person. I hope you're keeping local copies of all your videos "just in case" because they represent a valuable body of knowledge that can't be found anywhere else!
    As a point of reference, the formula I've used to sort out the "best" people to do business with includes these four guidelines:
    1. They CARE about doing their job well and meeting the needs of happy customers.
    2. They know their particular job well.
    3. They are competent as individuals.
    4. They have high ethical standards.
    You demonstrate each of these in great abundance - especially nice to see because it's so rare these days. My sincere thanks for helping me understand crawl spaces so well! Mine went from water, moisture, mold, and critters to dry, clean, sealed, and properly insulated thanks to you. Best wishes for your continued success (and more videos, please!)!

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  3 місяці тому

      This comment is such a nice read! Thank you so much for all of this!

  • @crazybobc1
    @crazybobc1 11 місяців тому +3

    Great video, very informative. Looking forward to the next video.

  • @TagiukGold
    @TagiukGold 11 місяців тому +3

    This is one of your best videos this week.

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  11 місяців тому

      Wow, thanks! That is very kind of you to say. Thanks for watching.

  • @bricelangston8634
    @bricelangston8634 11 місяців тому +12

    Had my crawlspace encapsulated in NC. I arranged to have rockwool comforbatting placed into the extended walls rather than fiberglass. Rockwool comfortbatting is moisture permeable, bugs and rodents hate it, sheds water, fire resistant, higher r value per thickness than fiberglass, and has sound dampening properties. Other than a lower price, the benefits of fiberglass is a fairly short list. My crawlspace problems extended from fiberglass, so I made it a point not to reintroduce fiberglass back into my crawlspace. I can't say I benefit of sound proofing, thankfully the fire resistance hasn't been tested, but floors are warm and the wildlife issues I was having hasn`t returned.

    • @sjpropertyservices3987
      @sjpropertyservices3987 11 місяців тому +2

      Thank you for sharing. Improperly insulated crawl spaces are unfortunately common in my area (Downeast Maine), including for manufactured homes.

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  11 місяців тому +1

      Thanks for sharing.

  • @hateferlife
    @hateferlife 7 місяців тому +3

    I'm building a house right now in CT. This information's value is immense!
    500 square feet of pre-existing house (really a summer cottage turned into a year round dwelling) that had a whole host of problems. My wife and I replaced all the sills (with sistered 2x8s) to unitize the structure, lifted it an average 6 inches and put it down on poured columns. Right now we're adding the exterior crawlspace insulation ('skits') and intend to encapsulate the space using 10 mil (or better) using the techniques you've outlined. Still going to add joist insulation on the bottom of each bay (spray foamed in faced iso with fiberglass or rockwool. New England be *cold!* ).
    It's a lot of work but we're blessed to start with a near-clean slate in choosing the correct crawlspace components!
    My heart goes out to all those effected by poor conditions in their castles. I hope you continue making people's live better and healthier!
    Thank you.

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  7 місяців тому +1

      Thank you so much for sharing your experience with us. Please let us know how it goes. Also, here is a website if you need to purchase some products to help in your project. diy.crawlspaceninja.com/mold-products/

  • @famousdude1239
    @famousdude1239 24 дні тому

    Have you ever work as a Carnaval Barker? You're a master!

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  24 дні тому

      Lol. I've been called a lot of things in my life but never that.

  • @sjpropertyservices3987
    @sjpropertyservices3987 11 місяців тому

    What do you recommend for insulating skirting of manufactured home in zone 6/7? Typical home comes with fiberglass insulation with "belly wrap" vapor barrier under flooring with home installed on a concrete slab. Skirting is often uninsulated although we are seeing more installations with insulated skirting (foam board which look like stone or brick). Uninsulated vinyl skirting typically includes sections with ventilation. New installations with insulated skirting usually include multiple automatic vents. Seeing people insulating skirting of manufactured homes and not installing any ventilation and covering what ventilation may have been present. When this is done I rarely see any dehumidification installed. Seeing damage from excess moisture when skirting is insulated with no ventilation, or very little.

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  11 місяців тому +1

      Wow, that's a cold area. I am not familiar with codes in that area but if Tennessee requires an R10 with 8-inch block minimum and a skirt offers zero protection versus a block wall. I am guessing, again guessing, I would want at least R20 if it were my home. Since usually foamboard is R10 max, I would double it up. That may prove to be a tough job but may be easier than installing a permanent foundation. Sorry I don't have a better answer...thanks for watching.

  • @davidrenfro5756
    @davidrenfro5756 11 місяців тому

    Advise please!?
    Houston Texas
    Peer and beam
    Non sealed crawl
    I placed r19 fiberglass paper up and was advised ill grow mold above it by somebody that had to do foundation work.. I pulled down a couple pieces and saw a few small specs growing with this being Over a year later and not near water source...
    Am I destined to rip out all that hard work and go to a open cell after all?

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  11 місяців тому +1

      If it is trapping moisture, it can be a problem. Your type of construction is difficult to insulate properly and keep dry. You may want to consult a local contractor or weatherization specialist that understands moisture prevention.

  • @tbyrd14
    @tbyrd14 8 місяців тому +1

    central indiana with pier and beam foundation on a vented crawl space. i have plastic and pea gravel on dirt, fiberglass insulation between floor joists and lots of moisture issues during humid times of the year. hvac vents have moisture dripping at times. what advice do you have for this situation?

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  8 місяців тому +1

      Is the foundation wall sealing the crawl space from the outside? If so, can you run a dehumidifier?

  • @timbr549
    @timbr549 11 місяців тому

    I have a tall crawl space that has one wall completely underground outside. Does that wall need to insulated or just covered with my vapor barrier? Thanks so much for your videos!

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  10 місяців тому

      In our climate just vapor barrier would be sufficient. Thanks for watching.

  • @donnamalinski5780
    @donnamalinski5780 5 місяців тому +1

    Not sure I understood right, is foam board better to insulate floor joists in the crawl space over fiberglass with paper backing? Love your videos

  • @user-gz5nt8ng1d
    @user-gz5nt8ng1d 9 місяців тому

    Question: I am adding foam board to the crawl space wall. There is fiberglass batting between the joists at the sill plate. should I continue the foam board up to the flooring or stop at the sill plate?
    Thank you

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  9 місяців тому

      I would stop at the sill plate and maybe lower if your area requires a termite gap then you could start again at the rim joists and foamboard/air seal there. Many pest control companies don't like the sill plate to be covered for termite warranties. Hope that helps, thanks for watching.

  • @collegebrain1
    @collegebrain1 9 місяців тому

    I live in the Chicago area. Should I add foam insulation on crawl space ceiling?

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  9 місяців тому

      That's a great question if the foundation walls or insulated, normally you do not have to do that as long as there is a heat source in the crawl space. Hope that helps thanks for watching. I would also check with local code to see what they require for insulation in your area.

  • @tomsniff2029
    @tomsniff2029 6 місяців тому

    In South Carolina what kind of rid joint insulation would you recommend

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  5 місяців тому

      We suggest to check with local codes. However Foam Board with a R value of R-10 that is termite resistant is typically best. We also sell that here - diy.crawlspaceninja.com/rim-joist-insulation/

  • @garydenesha1269
    @garydenesha1269 10 місяців тому

    live in the northern climate....have a wood foundation crawl space. the space is dry but there is a musty oder. minor mold growth as well. would like to insulate the walls. was going to use rock wool. should I put a vapor barrier on the outside/inside or neither? thanks.....

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  10 місяців тому

      Rockwool is naturally moisture retardant so you shouldn't need a vapor barrier and I never recommend plastic to cover wood. Thanks for watching and I hope that helps.

    • @garydenesha1269
      @garydenesha1269 10 місяців тому

      thanks, Michael.....that was my thoughts as well even though the makers and installers of wood foundations recommended a vapor barrier on the studs inside the crawl space.......very confusing!!@@CrawlSpaceNinja

  • @bethlori1640
    @bethlori1640 6 місяців тому

    To secure the vapor barrier, is it better to tack it down with gravel on top along the perimeter or tape it to the concrete wall? I think tacking it down with gravel (or sand bags?) is better as the concrete wall breathes and the condensation gets trap and causes the tape adhesion to fail. Appreciate any thoughts.

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  6 місяців тому +1

      Tapes and adhesives will usually fail over time. We use masonry nails, Christmas tree fasteners to fasten it permanently to walls. Thank you for watching.

  • @bibs1870
    @bibs1870 8 місяців тому

    Can mold or fungi grow on closed cell spray foam that's sprayed under an unvented crawlspace?

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  8 місяців тому +1

      I'm not sure if the spray foam itself is a food source, but whatever it covers can be if it's wet.

  • @A-TeamRVs
    @A-TeamRVs 8 місяців тому

    Hi do you have best way to insulate and seal the underbelly of a mobile home?

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  8 місяців тому

      It's not something we do but if there is no insulation I'd recommend you air seal major penetrations with foam and find a way to afix subfloor insulation. Sorry I couldn't be of more help.

  • @xaddict4420
    @xaddict4420 3 місяці тому

    any idea how much an inspection is in virginia , my moms small house, isnt 1 foot off the ground but my big arse, cant get under there to check things out for her

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  3 місяці тому

      It is best for someone to come out! Also feel free to check out our DIY Store - diy.crawlspaceninja.com/

  • @gmoneycash7456
    @gmoneycash7456 9 місяців тому

    Question. So I have had my crawlspace inspected and was told I only had mold below the insulation line. That the subfloor is mold and moisture free. Would you still recommend removing the insulation for mold treatment.

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  9 місяців тому

      Yes, when they told you there was no mold behind insulation, did they remove all insulation and test subfloor for mold? Sometimes, it's invisible to the eye.

    • @gmoneycash7456
      @gmoneycash7456 9 місяців тому

      They peeked behind the insulation and just visibly looked at it. My mold just looks like light pepper on the joist. Humidity levels is at 58% with a light duty (Lowes) home dehumidifier installed 4-5 years ago. Vents are not all sealed. Crawlspace has a light vapor barrier not covering everywhere.
      Planning on installing a Aprilaire 70 very soon by the Crawlspace company. However, I am planning on diyi-ng the rest.
      1200 sq ft house
      Mold- Decon 30
      Vapor barrier- your 12 mil ( one or 2-10x100?) enough
      -bora foam from local Crawlspace supply company
      Hilti- rental from you guys

    • @gmoneycash7456
      @gmoneycash7456 9 місяців тому

      I live in NC. I heard you say something about NC requiring a different attachment method of the barrier over the foam. Do you have any videos or instruction material for those specifics with pictures on how to do that?

  • @iammattjones
    @iammattjones 5 місяців тому

    I've seen a few instances of people insulation the floor/dirt either with foam board or spray foam and then vapor barrier on top of that with foam or spray on the walls. Is insulating the floor common? Recommended? Or should you encapsulate, insulate the walls, and then replace subfloor insulation?

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  5 місяців тому

      That is not very common. For more information please submit a Ask a Ninja Form - crawlspaceninja.com/ask-a-ninja/

  • @dougschadel8094
    @dougschadel8094 Місяць тому

    Anybody have any tips on insulating a crawl space that was a front porch but now its a living space. No insulation anywhere. The left wall is open with lattice covering the opening and cinder block wall to the basement on the right. The floor is not insulated and dirt base. Im not sure if i need to foam board the floors thats above and foam board the cinderblock? It has no mold but its a living space that needs insulation 😵‍💫😵‍💫

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  Місяць тому

      Lets discuss further together. Fill out a Ask a Ninja form and we can do a deep dive - crawlspaceninja.com/crawl-space-help-faq/

  • @rjbjr
    @rjbjr 7 місяців тому

    If you build a home to Energy Star specs, blower door testing is mandatory.

  • @unds85
    @unds85 11 місяців тому

    How do you properly insulate your subfloors?

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  11 місяців тому +2

      99% of the time we don't because we insulate foundation walls on a sealed system but rockwool or fiberglass is very common.

  • @leanit5756
    @leanit5756 3 місяці тому

    Everything grows mold. Here in pac nw, we get mold on our cars, metal mailboxes, stop signs, everything.

  • @showroom8295
    @showroom8295 8 днів тому

    So you recommend not to put any insulation on the subfloor crawlspace?

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  8 днів тому

      When encapsulated properly according to DOE, subfloor insulation is inferior to wall insulation. We have seen some homeowners do both (especially in extreme cold climates) but we are usually only insulating foundation walls in our systems. Hope that helps. Thanks for watching.

  • @senioradvocates3262
    @senioradvocates3262 11 місяців тому +2

    Great video and information. I can see you want feedback to make the channel the best resource for crawlspace search results. I can say with confidence backed by my subjective experience as I explore the topic, you sir are the authority. I bet you have forgotten more stuff than other channels share. Now it’s just a matter of attracting the attention of viewers. My suggestion would be to grow or capture a colony of gnats so you can study their attention span. You have 4 seconds of undivided attention unless what you offer is necessary for sustaining life, such as light.
    Get right to the point. Viewers know in 2 second if they intended to be here or not. Don’t waste your precious time on training people about UA-cam. You have too much gold to share. It would be like having a key note speaker charging $10,000/hr spending the first 5 minutes explaining where the bathrooms and fire exits are located ;)
    Video. How many words are represented in a 30sec video? 30,000? Do lots of them. Capture raw emotions. Show the worst of the worst so they come see your channel.

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  10 місяців тому

      Great advice - I do tend to ramble. I will try to be more to the point.

  • @cheekybastard99
    @cheekybastard99 11 місяців тому +1

    Can you make a video for the average man who's deeply afraid of snakes but is going to have to encapsulate his crawlspace?
    Maybe there is a way to drive them out before you get in there?
    I'm thinking about sealing it up and gasses it with ozone for several hours

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  11 місяців тому +1

      I wish I could offer you a solution, have you looked at some of these technology devices that are supposed to drive out critters? You could also get a critter wrangler to make sure it is clear for you. Sorry, I hope that helps.

  • @shyman9023
    @shyman9023 5 місяців тому

    Seems to me it makes sense to do a vapor barrier on the floor instead of doing an encapsulation.

    • @CrawlSpaceNinja
      @CrawlSpaceNinja  5 місяців тому

      You could do that. However that would not be an encapsulation. You would still be vulnerable to vapors coming in from areas that is not the floor.

    • @shyman9023
      @shyman9023 5 місяців тому

      @@CrawlSpaceNinja Thinking do the rim joists and leave the walls bear. Should not get vapor there and the area is not conditioned.