Kent TP1-B: Cable Replacement
Вставка
- Опубліковано 24 сер 2024
- #hamradio #kent #cw #morsecode #key
My grounding system was compromised in the past few months. There is a separate video about that. I use multi-band dipoles that require an antenna matching unit. On bands where the antenna matching unit is required, common mode current coming in on the shield of the coax can radiate into my shack. The antenna matching unit makes the transmitter happy, but the RF in the shack exists up to the antenna matching unit. I showed in a 2022 video how to use snap-on Mix-31 ferrite chokes to minimize the RF radiation from the coax.
During the time when my grounding system was compromised, the RF in the shack would occasionally get into the unshielded cable from my Kent TP1-B Morse key. It would cause my FTdx5000MP to get stuck in transmit. I used a shielded cable for my Bencher BY-1 key. I plugged in the BY-1 and all was well. So I ordered a shielded cable for the Kent key. In this video you will see how I connect the shielded cable to the Kent key. If you are interested in purchasing one of these cables, here is a link: Devinal 1/8 to 1/4 Stereo Cable,... www.amazon.com...
At the end of this video, you will be able to see a listing of some of the supporters of this channel who made this video possible. These are people who have supported the channel via Patreon membership, as what I call long-haulers. Long-haulers have supported the channel on a long-term basis. There are 4 levels of Patreon membership, including S5 (Associate), S7 (Executive), S9 (VIP), and S9+ (VIP+). S9+ (VIP+) denotes a member who voluntarily chooses to give over and above the amount for S9 (VIP) membership, helping me help others who might not be able to afford even Associate level membership.
I hope you enjoy this video and find it helpful. If you find my channel informative and entertaining, I hope you will consider joining my support group by clicking on: www.patreon.com/N4HNH There are 3 levels of support, including exclusive content. Visibility of premium content is determined by the level of membership you choose. The higher the membership level, the more content you have access to. VIP members are invited to participate in periodic Zoom meetings.
Most videos are visible to the Patreon team members long before they are released for public viewing. Some videos are never released for public viewing. Executive and VIP members have access to the menu optimizations PDFs I’ve written for the FT-891, FT-991A, FTdx5000MP, FTdx101D/MP, FTdx10, and FT-710 AESS. Future radios could be added. These documents are for Executive and VIP members who subscribe annually. They are also copyrighted. They shall not be divulged to anyone else without the written permission of Doug McAlexander, callsign N4HNH.
N4HNH Radio has a Web site where you can purchase T-shirts with some of the sayings you might hear in the videos. Some of the more prominent videos are featured there as well as a page geared toward ham radio training. Go to: www.n4hnhradio...
Another great way to help support this channel is to click like and subscribe.
73, de N4HNH
Is one for dit, one for dah and one for ground? I don't see a key on net to the contacts, do you have to have a manual or is that some kind of a standard connection layout everyone uses?
I connect the shield to the common connection. The other wires are for dit and dah. If you’re left-handed, reverse them from the way I show in this video.