how to make a diy wire tensioner tool /new ideas/ 5-minute crafts/ tips
Вставка
- Опубліковано 3 лис 2017
- JENNI MERCHANDISE: www.jenni.swiss/shop.php
INSTAGRAM: jenni.swiss...
WEB: www.jenni.swiss/
Do it yourself and this is a simple and useful device!
It's that easy to build a wire tensioner yourself. a raw and a metal pin and off you go. so hose bridges can be fastened and other things connected. Build your own wire binder and spend money on expensive screw bridges!
Over Time von Audionautix ist unter der Lizenz Creative Commons Attribution license (creativecommons.org/licenses/...) lizenziert.
Interpret: audionautix.com/
Direct to Video von Chris Zabriskie ist unter der Lizenz Creative Commons Attribution license (creativecommons.org/licenses/...) lizenziert.
Quelle: chriszabriskie.com/dtv/
Interpret: chriszabriskie.com/
Banjo Short von Audionautix ist unter der Lizenz Creative Commons Attribution license (creativecommons.org/licenses/...) lizenziert.
Interpret: audionautix.com/
5-minute crafts tips experiment new ideas maker - Фільми й анімація
Just when you think you've already found the best and simplest hose clamp maker out of many other great designs... another one comes along :)
Hammer geil, dies ist auch wieder etwas, was man haben sollte wenn einem mal die Schellen ausgehen, oder man gerade keine passende Rohrschelle hat. Respekt Jenni!
The slotted crank is a fine idea. Watch similar videos to see a much easier way of pre-forming the wire loops. You only have to do it your way if you can't fit the pre-formed wire over one end of the pipe.
Yes, I like your video and the idea! The same principle as the “clamptite”, but much more simple construction and cheap implementation!
Thanks for the good DIY idea.
thx for your nice feedback😊🍀
Jubb, sehr geil! Kannte ich so auch noch nicht. Wieder was gelernt! 👌👍
Baschro
I'm
Nicely done. Ironically, I thought you were building something to use on a fence tensioner and up until near the end you were following same steps I planned to use in making THAT tool!
Sehr cleveres Werkzeug, Lukas. Danke fürs Zeigen.
Auf jeden Fall viel besser gefilmt als das Original. Thx
Sehr schönes Video! Und die Schlauchbride aus Draht ist auch prima. Wasser marsch!
One of the best i have seen ever, thanks.
Sehr geil !😎👍Praktisch und einfach !Top Arbeit!😎🤙
Super cool tool : You have complete work shop setup to do all the cutting and drilling but I cannot imagine ti fabricate it at home hence I had to depend upon workshop fellows. Kudos to you.
Saludos desde Venezuela. Muy didáctico y excelente aporte. Dios guíe tus pasos.
Addition :great workmanship you are are a real tradesman.
hab sowas noch nie gesehen... sehr praktisch!!! LG Robert
Toll hab erst zum Schluss hin gecheckt was es wird ... klasse
Good job; nice, professional and clean
That is a pretty neat tool and clamp. Thanks
Grübel... irgendwie habe ich ein Déjà-vu. Schönes Video und geniales Werkzeug. Gehört auf die ToDo-Liste
Ersetzt ganz gut eine Schlauchschelle! Gut gemacht!
This vid is so superior to most -no holding the camera with your left hand while trying to work with your right as the picture trembles out of focus all over the place, love the close ups and the editing of excess...bruce
Buen video excelente fabricación de la herramienta
Brilliant...the easiest, best way making this simple clamp tool I found on UA-cam.
Einfach brilliant ...der eifachste weg fuer dieses "klemm" werkzeug dad ich fand in UA-cam
Amigo gracias por tú video, fue muy útil para mí, dios te bendiga
Very cool idea and useful tool. Awesome work. 👍
Ein praktisches und kraftvolles Werkzeug. :-)
simple but very useful.
Die Grundsätzliche Idee habe ich schon in einem anderen Video gesehen und mir meine Version schon gebaut. Diese hier ist Handwerklich gut und Funktional.
Geniale Sache mein Freund!
Very good the video seems a good homemade tool
Tolles Video !
Cool idea. No more expensive jubilee clips needed 😀
Nice idea! Bravo!!
Wieder was dazu gelernt.
Mach weiter so.
Martin Braumann h
It's amazing!!!! Congratulation!
Great cinematography! Nice work!
Nice camera work, great tool. A hand grinder would work well making it too.
Very interesting my friend!! cool technique
Perfect Tool
Good job,,,,,,,,,,,,SUPER JOB,,,,,,,,,,,,,
Very clever 👏👏👏
Well Done!
Geil geschnitten Lukas!
🔥🔥🔥💪 Thanks
I like the style of your videos dude, great pics & nice music, almost perfect. :)
Interessante 👍
Nice, good idea, Thanks sir
Very good.
Beautiful! So simple! It's great!
Its nice to have all those tools,no explanation of materials . But nice work.
Very good!!!
SUPER JOB
😌
Bravo
The best
Muy buen vídeo 👌👍👍👍
🍀
Wieder was neues dazu gelernt. Klasse Video Jenni
Grüße von meinem Kanal
Geili idee komplimänt das hani ou noni kennt und ben Sanitär :-)
Schönes Video, die Vorrichtung kannte ich allerdings schon aus einem Video hier auf YT.
Nice
10 fingers, 100% success!
ein super cooles teil sowas habe ick noch nicht gesehen Respeckt
danke dir
Habe mit dem Titel nicht ganz verstanden was es wird aber gute Sache. Hält das auch ordentlich? Kann mir vorstellen daß eine Schraubschelle mehr Druck ausübt.
Die Beleuchtung der Detail Szenen gefällt mir gut. Ähnlich meines LED P7 Lensers.
Sehr schön. Grüsse aus Bayern, Arne
The best youtube video. Congratulations Mr.
hey👍 thx for your nice feedback
Top
Next step is to add a ratchet on the handle, would be great! Nice work!
Tools are made up of other tools, so why not modify a ratchet extension to take up the wire, cut the extension so that it fits through the transverse hole and circumferentially groove it so that it can be held captive in the tool by a spring clip, then add stops to hold the ratchet handle against the tension in the wire during the flip-and-cut step?
diy for some people lol. beautiful camera work and editing.
thank you😊
Yes, distinctive style visually, overall. First view of this channel's videos, and 9 months after this issue, so I don't know whether an in-house style sheet has (been) developed, but you're not far from one anyway, so carry on.
Some nice touches: the finished tool in isolation; close-up views showing the hands in the various processes; real-world-seeming lighting (though you could benefit from a large 'fat' fill, even if only a 1 metre dia. disc of mylar); and, the 'story' structure.
Each of these could be built out a bit more. For example, short clips showing setting of stops, depths, measurements, etc., then a no-gloves-no-power 'psych' of the power tool work (at the face), followed by the expected gloves-on-power-on working of the piece…
that 80s detective music 👌
Coole idee, gutes editing! Schon gut wie man mit jedem Film mehr Erfahrung im Filmen und Schnitt sammelt, oder?
Not a bad approach. What's a screw bridge?
nice for cv boots
yep👍🍀
Can you help me like I’m a fifth grader? I want to envision how this works. Do you have a follow up video that demonstrates this operating. I’m trying to find a tension device and create it but I can’t envision how it creates the tension
Easy when you have all the tools! Alternativey, buy them for $2!!
Cooles Teil! Meist hat man(n) die passende Schlauchschelle ja nicht zur Hand ;-) LG Heiko
The anvil is bad ass
Das exakt gleiche Teil neulich auf UA-cam schon gesehen - nur da waren die Kommentare überwiegend negativ. Muss wohl an der Qualität der Filmerei liegen... 😋
What type of hoses are you using this for?
Schlauchschelle geht auch warum so ein Aufwand?
Hat mir sehr gut gefallen Dein Video , freue mich immer über was ich noch nicht kannte.
Annette Stoltenberg also so ein draht passt für jeden schlauchdurchmesser. die passenden schellen hat man meistens-wie üblich- gerade nicht zur hand 😂👍 klasse idee. gefällt mir auch sehr.
Mir gefällt das auch nur warum ist mir nicht klar. So viele Schellen braucht keiner, so eine perfekte Sache zu bauen da gehört eine Menge Wissen zu. Metallbau kann nicht jeder .
Ist ja auch Egal , Video war klasse das ist das wichtigste.
Annette Stoltenberg o
How many foot-lb torque this gives? When it comes to fencing, torque is necessary..
Brasil..pecuária
Have you heard of the Cortool?
That's a cool tool, by chance, do you sell them?
no. i make only youtube
Works better and quicker than that 60 dollar tool they make
I like the ingenuity but it doesn't look tight at all. Not even the least bit.
All that time and effort, I could be to the shop and back. Could buy 4 tensioners for 12 bucks!
ok😜👍
Cool. For irrigation it’s not practical. The wire isn’t able to be retightened
Hi there, can you tell me how many kilos this tool can clamp?
I did not test it
I realize you wanted to play with the plasma cutter....but the bandsaw would have been faster and more accurate.....same thing with the teeth grooves.
Desperdiciaa mucho alambre tienes que hacerla mas eficiente
Nice. But that means you never tighten your hoses without so many specific tools.
Make Wire Tighteners Great Again - MWTGA
Are microphones really that expensive these days?
Недостатки: - у воротка слишком длинная ручка; - большой расход проволоки. Отверстие надо перенести ближе к конусу и вместо воротка использовать гаечный ключ; - проточки на конусе лишние. Можно без них.🤔😒
danke für deine guten ideen👍👍👍
Самый косорукий хомут.
I bet your files don't last anywhere near as long as they could and should.
indonesia jabar hadir izitn subscribe
viel zu kompli - sorry, aber beste schellenmontage für jegliche art von schlauch, wie öl, kraftstoff, luft, wasser
Check out the Original haywireklamper.com
I like the tool that you made.. The only thing i don't like is that you are not working safe without any safety gloves
😉
Don't think he is in the U.S.A. where a splinter causes a lawsuit!
You NEVER wear gloves when using rotary tools! EVER!!! If it snatched it its good bye hand/arm !! Life???
Well said
Fck viRus
🤣🤣🤣🤣🤣🤣🤣🤦♂️