Slamming My Honda Aero 50

In this video
I decided to upgrade the rollers from stock to 6.3 gram rollers to get a little extra pep in it's step. Thanks to the homie eric for letting me buy his off him and for the undercowl seen later in the video.
First I had to take of the crank cover and disassemble the gear to take off the belt to get to the variator. Once taking apart the variator there is a restrictor plate that I'm told you don't need so it can open up a bit more. So keep that off. Then 6 little cylinders will pop out and those are the rollers. These are what we're replacing. Going from stock which I believe are 9 grams to 6.3 grams should be at least a small notice in higher end power especially with the restrictor plate off. Throw everything back in order as it was but without the restrictor plate. And that project is done.
Now to slam this aero!
Basically the process to that is to get both front and rear shocks off and take the spring out to then put a washer, bushing, then washer to have it sit more comfortable than just nothing and boom your scooter is Slammed.

[@ATownPyro]

Time for a 72 corse upgrade!

[@RaceStop]

Soon