Це відео не доступне.
Перепрошуємо.
"Trying" to plow with the durty two turdy and 4 bottom slat plow.
- Додати в
- Мій плейлист
- Переглянути пізніше
- Поділитися
Поділитися
Вставка
Розмір відео:
- Опубліковано 11 лип 2024
КОМЕНТАРІ • 58
Наступне
Автоматичне відтворення
Chisel plowing with the International Harvester 1066…..TayFarms
Переглядів 168 тис.
Spring field work 2024, from standing cover crop to planted ground.Timothy Fluegel
Переглядів 10 тис.
Man Restores 40-Years-Old Classic Motorcycle Back to New | Start to Finish by @LiveWithCreativityQuantum Tech HD
Переглядів 16 млн
Атака ВСУ на Курскую область: что происходит?BBC News - Русская служба
Переглядів 3,4 млн
«Ми так війну не закінчимо ніколи»: 22-річний морпіх про те, чому їм потрібні молоді #війна #зсуСлідство.Інфо | Розслідування, репортажі, викриття
Переглядів 623 тис.
ШОК! 😱 Кадиров пішов ПРОТИ ПУТІНА | ШотамрашаOBOZ UA
Переглядів 284 тис.
СТАСЯ МАКЄЄВА: СЕРДЮЧКА на гендер паті. Тато ЗРАДЖУВАВ, коли мама хворіла на РАК. Коли українською?Okay Eva
Переглядів 466 тис.
Testing Rail Car on Abandoned Railroad with 100 Year Old Tunnel and TrestlesMatt Spears
Переглядів 1,1 млн
Farmall M Square Baling with IH 47 BalerFariss Farms
Переглядів 20 тис.
Allis Chalmers 190xt series 3, Pulling a 3 shank Allis subsoiler.Timothy Fluegel
Переглядів 19 тис.
Holy Crap!Just a Few Acres Farm
Переглядів 268 тис.
Abandoned 4430! Hasn't Run in 22 Years! Will it Run?Territorial Trading
Переглядів 49 тис.
How These Factory Machines Operate At Another LevelImpressed
Переглядів 1,8 млн
Dry breakdown in the Massey Ferguson 50x 1978. by bleeding air from the Bosch injection pump system.Dark Workshop: Restoration and Repairs
Переглядів 106 тис.
Horse Progress Days 2008 - Draft Animal Power EventRural Heritage
Переглядів 359 тис.
A Bunch of Work on a Small Dairy FarmFarmer's POV
Переглядів 26 тис.
ВСУ наступают под Курском. Путин требует действий. Эвакуация в Белгородской области. НОВОСТИРадио Свобода. Новости
Переглядів 1,8 млн
Державний Прапор України підняли на КУРЩИНІ в рф😍🇺🇦💪🏻 #курськ #прапорукраїни #рф #війна #наступТелеканал Конкурент TV - новини Луцька та Волині
Переглядів 431 тис.
ВІКТОРИНА #37. EL КРАВЧУК ТА ВАСИЛЬ БАЙДАК х КУРАН ТА ВЕНЯ | НОВИЙ НАЙБОЖЕВІЛЬНІШИЙ ВИПУСК ВІКТОРИНИВетерани космічних військ
Переглядів 502 тис.
Битва умов. ❤️ПІДПИШИСЬ! Андрій Попик. чат рулетка.Андрій Попик чат рулетка
Переглядів 452 тис.
🔥 Уся правда про українську СУДЖУЗе Інтерв'юер
Переглядів 228 тис.
Обман ради папы #юмор #топКостя Павлов
Переглядів 3,6 млн
Кадиров пішов НА ПЕРЕГОВОРИ із ЗСУ? АХМАТівці ТІКАЮТЬ! Київ захоплює НОВІ МІСТА РФ | НОВИНИ СЬОГОДНІУКРАЇНА СЬОГОДНІ
Переглядів 517 тис.
Знищені колони та десятки полонених: останнє про Курський прорив. Донбас, удари, бої | Свобода LiveРадіо Свобода
Переглядів 406 тис.
That tractor sounds mean! Definitely a different sound from a 226. Tough plowing with all the roots. I hope the corn does well enough down there. That is a heck of a cottonwood tree. Thanks for sharing, Tim!
This thing is a wd45 on steroids. To think that when allis was developing the 45, they built 6 with a 230 and 6 with a 262 and sent them to testing grounds. They opted for the cylinder 226 due to fuel economy. I can imagine if they used one of the 6 cylinder engines, the 45 would have had a big silly fuel tank on it for sure 😆 and if it had a 262 they could have marketed it as a 5 bottom tractor. Thanks for watching and commenting Evan!!
Man yeah, that thing sounded amazing!!! Got me wanting a straight pipe on Glenda now 🤣🤣🤣🤣🤣🤣🤣 Yep....the choke, always needs a quick pull of the choke. Glenda is the exact same way!!! Man that was awesome!! Looking fwd to hearing how that pioneer does compared. Man that is a HUGE tree!!!! Looking fwd to seeing whats next!! 😁😁👍🏻👍🏻🇺🇲🇺🇲🇺🇲🇺🇲
Glenda is prime for a straight pipe. Makes a dirty 230 sound awesome.
@thomasandrews9764 I might just have too for corn harvest!!😉😉🤔🤣🤣
That's weird about the choke, but I guess it is what it is. Knowing yours does the same thing, I'm gonna stop messing with it 😆. It definitely sounds awesome with the straight pipe. Not to loud either you can stand to run it some how lol. So far I can say that the stalk strength in the pioneer is no good. Doesn't seem to be meant for cultivation. I finally got through it on Saturday with the Buffalo soldier, it was only about 3ft tall and it was breaking off from the cultivator 🤦♂️ some of the viking was 5ft tall and stood right back up. If I cultivate the pioneer at 5ft tall I wouldn't have any corn left. And I had to got about 1mph or the dirt would break then off at this point in the viking I'm going about 5mph tossing dirt at the corn like the speed of sound 😆 🤣 😂. In all fairness though I have no idea the health of the soil. It could be I'm lacking something, I did put 6tons power acre of chicken manure on it. And it could be the wetter conditions. But the small sections that drain well seem to be the same so I'm kinda excluding that hypothesis. I've I get soil samples done I have a better idea I guess. But as of right now my opinion is it's crap for organic practice 😆 thanks for watching and commenting my friend.
Sounds pretty good. Ground looks pretty wet. My cousin's had the largest cottonwood tree in Georgia till a storm blew it down.
This tractor is a beast for sure Robert. The rain this spring has been relentless around here. I pretty much had to force this corn in 😆 I still haven't been able to cultivate it. I hope to get through it today finally. I know citron woods could grow that big but it's just so rare to see one, as a kid I airways assumed it was an oak tree, but it's quite a bit bigger than the old growth oaks trees on the farm. Thanks for watching Robert, and commenting!!!
@TimothyFluegel Yeah it was really wet around here too. Was 3 weeks late planting my sweet corn, and ended up mudding it in. Didn't come up and had to replant. It's only about 12" tall now.
@@Rdrake1413you aren't far behind me on the sweet corn. We finally got ours in on the 18th of June. We usually do a 2nd planting on or around the 10th. So ours is the only about a foot tall too.
Nothing a string of tile won't fix. D 9 with that 4 bottom. Those Cottonwoods grow into giants. I know 1 old growth tree the made enough lumber to build a milking barn in the 1920, not quite sure how they got it to the saw mill though.
You couldn't be more correct about the tile. One we got done clearing all the fence lines I think my brother and I are going to go half on a tile digger cause we've definitely got other spots that would benefit greatly from tile. Cotton woods usually root out and fall down around here as a kid I always thought this one was an oak tree 😆 but it's quite a bit bigger than any of the old growth oak trees on the farm. Thanks for watching and commenting!!
Sounds really nice
interseeding buckwheat in corn is a good weed control solution in wet times and places. I made a crimper that runs between the rows that you can kill the buckwheat with and feed da corn. Pretty expensive seed though.
I thinks it to late to try this year. But that's definitely something I'm going to keep in mind for future years. It's only a couple acres down there and x the only ground i have that stays wet. It wouldn't be to hard to make a 2 row crimper. Thankyou for this!
@@TimothyFluegel v2 is the sweet spot for seeding
I've never seen a cotton wood tree that big either.
Man that thing is something else as a kid I always assumed it was an oak tree. But it's quite a bit bigger than any of the old growth oak trees on the farm. Thanks for watching and commenting.
we had a massive cottonwood tree on the farm when i was a kid that had blown over that was that size or bigger even
Looks yellow - Nitrogen ? You can get a spray for the corn , has micro minerals etc . makes the corn more healthy . There is a spray for soya beans that I used and swear by .
Need a pan plow on that new ground !
If only they had a "traction booster" type system on this tractor.....oh wait they do!
Should probably take advantage of it
🤦♂️ ya know instead of being a smart ass about things you could have just asked why the traction booster wasn't working correctly.
This is the 1st time this chassis had done any work that a traction booster is needed. When we hooked the plow up and went to adjust it we realized at some point someone welded the 2 plates the linkage hook up at the pump together for what ever reason. The spring was missing as well. And the linkage was broken and kinda repaired, and as we found out later, it was not the correct length anymore, the one that goes to the coupler. Main reason we were down there with it was to see how it was running after the valve job and throttle linkage. But we couldn't get it adjusted correctly either pulled the plow out without much draft or wouldn't do anything. Part of it may have been the spring wasn't the right tension as I just found one on the shelf at short notice to see how the tractor was running. But the main problem was the linkage, I've since replaced it but wouldn't mesh with each other. It was getting different readings, we'll call it, from the lift arms and snap coupler. Once we realized it would never work right with that linkage, on top off the fact We were kinda pressed for time, we decided to just get the 190 which was the plan to begin with but, like I said we were itching to see how the 230 was running, and I wanted to share our misadventures with you guys. I guess I should have explained all of this, but I feel like I talk to much in some of my videos as it is.
@@TimothyFluegel wasn't being a smart ass, Ive just watched 100s of these Allis Chalmers out plowing, looking bad because people either don't know how the traction booster works or even how to operate it.
The traction booster system, when engaged and working makes these tractors amazing pulling a plow. When I seen the weights on the front, my first thought was either they pull with this tractor, or have tried plowing with before and the front comes up.
When engaged the front end will maybe dance, but it won't come up.
@RJ1999x I know what you mean there. I've been to many plow days that I've had to help people with their traction booster so they aren't looking silly out there lol. I've got a friend that runs 5 14s on a stock gas wd45 with 13.6 tires. 😆. He's the person who taught me how to set these correctly. The weights are from pulling on the front but in the tough clay we run the traction booster a little weaker than most would and use the weights to hold the front down. Other wise you end up with the plow pulling out and only turning 2 or 3 inches in the tough spots. We run then like that to get a more consistent plowing depth. We can generally plow circles around other colors and we usually are running an extra bottom compared to the Ms, Gs ect,ect. It's not until you get into the 70s tractors that other colors can attempt to keep up 😆. All that being said I fail to ad context to videos like this and end up making myself look like an idiot sometimes 😆.
@@TimothyFluegel I've never seen a 70's era tractor that can plow alongside an xt with the traction booster running.
No tractors of that vintage, that I ever used had a draft control that actually worked
@@RJ1999x😆 I said 'attempt' to keep up. This year at plow day I was plowing circles around the 4020 and Oliver with same plows. The 4020 had a pull type but the 190xt was out for a light stretch while the others were in a full blown workout 😆
Looks like you have some clay. Should work better after the field is opened.
I've broke ground like that.
Thank you Tim.
Your welcome Bryce thanks for watching and commenting!
Thank You Mr. Tim, always good!
Your welcome sir, thanks for watching and commenting!!
28 inch disc plow, new ground plow would cut the.most of these roots ,my super A disc plow do a good good job on roots ,but this engine sounds like caterpillar nice
I have a friend who has a disc plow. I never even thought about asking to use it. Where were you a couple of months ago with this tip 😆. Thanks for watching and commenting.
If that was plowing some good ground that would be a pleasure to sit behind. Love the sound and wants pull
I couldn't agree more. Not used to hearing a straight six gasser in the little allis for sure lol
Turdy indeed
🤷♂️
5:09 is the spot i bagged that 10 point buck when i went to check traps that morning in 2011. ma gave me a ride down and was pickn on me for not gettn a deer yet cause we saw three on the lane goin down there. there was a nice thicket of trees there i was hideing in. ill never hunt like that again cause i basicaly had to take it down in self defence. i could have got the doe as well but was about to poop myself from what just happened.
😆 see you were to sneaky for your own good 😆 prolly scared the deer worse than you were lol that's definitely a situation I wish was on camera in sure it would be a great laugh to watch go down 😆
Unique cottonwood
Sounds pretty good with the straight pipe. Normally the tractor Governors are pretty snappy when they are adjusted correctly. Are you planning on leaving the combine governor or finding a tractor governor for it. Thanks for the videos
We have a d19 governor and all the fixings to go on it. The gas 230 motor is going to come out and the 230 diesel motor we have built in the shop will go in it. That's when I'll tear the front off the gasser and put the 19 governor on and back into a different chassis. Diesel of course.
What Tom said here 😆. That's bobs real name, btw so you know who's answering your question 😆
Cottonwood reaches maturity, and becomes a hazard. Plenty of experience with cutting Cottonwood off of the driveway. It burns too fast to make good firewood.
That's why this tree amazes me so much. Like you said it always becomes a hazard, but this one seems solid still somehow. On the burning note. It smells like an old gym sock when you burn it so it's not that great for a camp fire even 😆. Thanks for watching and commenting Bryce!
Seems to me that 4 bottom is too many. Especially for the tractor you got in front AND (mostly) too deep plowing. Plowing a soil field is a structural and physical help. Purpose is to prepare surface for next crop. It must be done properly. If not, it is kinda useless. My opinion here.
Was that the tractor you were trying to get the traction booster to on? Did you get it figured out?
Did you get the 190 to pull on the high side or is that the one you were going to swap out transmission and rear axle on?
Yes it was. After he got to looking at it closer. They had a tack weld holding 2 pieces of linkage together that needs to move freely, the spring was missing. I think you pointed that out. And everything was adjusted completely out of wack 😆. I think he's got it now. And stop telling every one the 190s dirty little secret 😆 🤣 😂 just kidding, the high side is toast in that tractor for sure lol. I hope to get the rear end swapped before fall. But we'll see if that works out for me.
Ac guys being ac guys. Does sound good though
😆 now what's that supposed to mean 😆
G day from Ont Yrs ago Pres Reagan pd farmers not to plant , $80/ac? Is this what u r talking about.
Yes she had snap
heard of cotton wood , never seen it
Ths G one.
That's pretty much it. They call it a filter strip for the creek, and also to help hold the ground together, but it got done yes in it and they wouldn't pay any more, I'm curious what does a better job at holding ground together that some trees 🤷♂️. Around here, land is about 300 an acre to rent, so that is about what they pay an acre on it. But I'd much rather take my chances and farm it. Thanks for watching and commenting!!!
@@TimothyFluegel Yea I guess around that
It's a bambagalia
Ah yes and a beautiful one at that!
I've always heard people call them Canadian poplour. Its also known as a bambagalia tree?? I've never heard that term.