Buy a Fog Hashing immersion system DISCOUNTED! - voskco.in/fh What good is an immersion tank without miners? get one! voskco.in/am *Use code voskcoin to save some coin* Check Out our Initial Fog Hashing Review & Guide! - ua-cam.com/video/Ijie59tOrXw/v-deo.htmlsi=Q_lwihkSIB5pCkSY
Hey do you know of any immersion system distributors in the US (preferably Southeast) that I'd be able to pick the unit up from? That $750 freight charge on the C2 isn't my cup of tea.
Gaw I wish I had someone to mine with vosk your lucky 😮 everyone I ever find doesn't want to take the time to understand such a complex thing such as mining crypto but yall give me hope so thankyou 😅. lmao I always land with someone who doesn't take the initiative to understand anything remaining ignorant about it all
Thank you for watching! The C2 is super sleek looking. I'm excited to get it up and running. It looks like it would be a great solution for at-home miners.
Looks like you still need to take some fluid out. You will get better cooling performance with the hot aisle set and configured to spec. Right now you're not getting as much hot aisle isolation without dripping over the weir edge. A bucket and red solo cup and scoop out a half a cup at a time with no mess, until your hot aisle fluid is about 1-1.5" below the edge.
thanks Alexa.... I'm searching for the US supplier of dielectric fluid i think you were going to link... looks like a 2-3 year replacement of fluid so we are gonna need it down the road .. appreciate it
hey guys! just wanted to know the wattage consumption in total after removing all the fans out... collectivelly with C6 and all 6 miners and also with dryer included...
I like is low noise but a little bit messy and have to replace the liquid every 2, 3 years. Also in Europe I have a hard time to find dielectric liquid.
Thank you! We're working on getting three phase installed, which will reduce our electric rate and help keep us profitable. I'm also thinking Bitcoin's price will go up.
What do you think will happen when Bitcoin is all mined up do you think it will collapse in price will a different crypto currency take its place also if the having causes bitcoin to become less attractive to mine do you think it would collapse?
seeing you guys trying to get that plastic barrel of the truck made me think : youre lucky it didnt bust wide open upon landing on the ground , mightve been eazier (in hindsight) to get a longer hose on that dieselpump and empty the barrel while it was sitting in the bed back on topic you want to make more bitcoin and youre thinking on expanding youre operation and run more miners the newest antminer (the s21) has a hashrate of 200 at 3500 watts (there faster versions but they use more power and might put you over the capacity of youre current grid ) at this moment i can buy a s21 here in the netherlands for about € 4469,28 the s19 does about 110ths at 3250 watt so youre making 660ths at 19500 watts i think it be cheaper to upgrade youre current 6 to the newer s21 as the hashrate is 200 ths at 3500 watt so say you about at the max power you can use so you can run 5 of those and one at a lower power (or all at lower power ) and make 1000ths at 17500 watts , and use less power doing it and you dont need to buy another submerging tank and hardware , oil yadahyadahyadah (guessing thats about 10000 right there and no 2nd tank means no extra electrics to run it ) and you still need to buy 6 more miners to run in it those are 22.506 euro together , so you pay 10.000 (euro) less for the 310 les extra terrahash per second but 13,85 per day less profit (means it takes about two years or so to turn that extra profit intoo a return on investment if you where to spend that extra 10000 dollar in material ) probably be up and running faster too as you only switch out the miners for newer ones Profit per day $ 12.83 DayPool Fee $ 0.5539 Mined/day Ƀ 0.0008148 Power cost/Day $ 42.00 Profit per week $ 89.84 WeekPool Fee $ 3.88 Mined/week Ƀ 0.005703 Power cost/Week $ 294.00 Profit per month $ 385.04 MonthPool Fee $ 16.62 Mined/month Ƀ 0.02444 Power cost/Month $ 1,260.00 Profit per year $ 4,684.64 YearPool Fee $ 202.17 Mined/year Ƀ 0.2974 Power cost/Year $ 15.33 k this was at the 0.10 cents a kW electric you mentioned , youre estimation was a bit off and youre profit seems to be based on 0.075 cents per kW based on youre mentioned electric price it would be : Profit per day $ 23.33 DayPool Fee $ 0.5539 Mined/day Ƀ 0.0008148 Power cost/Day $ 31.50 Profit per week $ 163.34 WeekPool Fee $ 3.88 Mined/week Ƀ 0.005703 Power cost/Week $ 220.50 Profit per month $ 700.04 MonthPool Fee $ 16.62 Mined/month Ƀ 0.02444 Power cost/Month $ 945.00 Profit per year $ 8,517.14 YearPool Fee $ 202.17 Mined/year Ƀ 0.2974 Power cost/Year $ 11.50 k note that thats allmost twice the profit that you make today with the same cooling setup with less miners than youre running now (less heat produced ) and youre using less energy and a return on investment in about 2 years (?) now to run those extra miners you need to upgrade youre grid , hey theres room on the grid now for a 6th s21 being dropped in the still open spot in the tank .... lets see here wat 6 of those puppies churn out : Profit per day $ 61.66 DayPool Fee $ 0.6647 Mined/day Ƀ 0.0009777 Power cost/Day $ 4.14 Profit per week $ 431.63 WeekPool Fee $ 4.65 Mined/week Ƀ 0.006844 Power cost/Week $ 28.98 Profit per month $ 1,849.85 MonthPool Fee $ 19.94 Mined/month Ƀ 0.02933 Power cost/Month $ 124.20 Profit per year $ 22.51 k YearPool Fee $ 242.60 Mined/year Ƀ 0.3569 Power cost/Year $ 1,511.10 and thats with only an extra 4000 for the extra 200th/s miner and the upgrade to the grid you needed anyway if you want to rin those 6 110 ths miners , makes you think doesnt it ...... allso it might get a better profit ratio if youre using solar panels to partly power the mining farm , you whont be feeding power back intoo the grid but on sunny days you could save on power usage one panel produces around 1.5 kilowatt-hours (kWh) of energy per day.(0.15 cents),,,,,,,,,,,,,, hmmmm with the cost for electricity where youre at that might not be enough to offset the purchase of those
I know you probably get it all the time but I have been through a real rough patch recently...The airport I guess thought my power supplies were some kind of bombs or whatever they took them...I really want to get this all up and running but even my motherboards are not working on a friends old power supply...any help would be great
I purchased the C6 unit a month ago and am waiting for delivery. I chose this over the DCX due to the issues you had. I was really hoping to get a DB meter reading on the dry cooler though. I'm wondering about initial install though. You had an experienced team helping, I'm doing it by myself. I've tried reaching out on your forum but got no replies. I'm looking for anyone I can reach out to during the setup for advice. If there is any way I could get some (very minor) help in terms of just some questions during install that would be great. Depending on how this works out, I may be getting their BC10 or BC20 container solution for a rural property I have.
I've deployed a couple of the B6D's. The C6 is a simpler design with less things to have to worry about. Happy to help. Your electrician and them wiring to spec will be the only real complication. The C6 doesn't have the same pump hose vibration issues. Check my comments on the first B6D video as well, for info on that.
I couldn't understand how you can pour the coolant liquid on the Miner. Doesn't the liquid enter the miner and spoil the circuit board & fans and what it is going to do the LIVE electricity that is plugged in. Could anyone explain this. Sorry I am new to this.
The liquid came crystal clear, but we used a pump to get it out. The hose on the pump had some old liquid left inside which made it yellow. We've seen no performance issues whatsoever from this.
Buy a Fog Hashing immersion system DISCOUNTED! - voskco.in/fh
What good is an immersion tank without miners? get one! voskco.in/am
*Use code voskcoin to save some coin*
Check Out our Initial Fog Hashing Review & Guide! - ua-cam.com/video/Ijie59tOrXw/v-deo.htmlsi=Q_lwihkSIB5pCkSY
Hey do you know of any immersion system distributors in the US (preferably Southeast) that I'd be able to pick the unit up from? That $750 freight charge on the C2 isn't my cup of tea.
Incredibly proud of Alexa for spearheading this review, and being a key piece on the original install day!
💜
Gaw I wish I had someone to mine with vosk your lucky 😮 everyone I ever find doesn't want to take the time to understand such a complex thing such as mining crypto but yall give me hope so thankyou 😅. lmao I always land with someone who doesn't take the initiative to understand anything remaining ignorant about it all
@@missvoskshould just google hho generator .free electricity to power mining farm easily.
Hi voskcoin do you know Kyle Williamson bc I’m his daughter hannah
Alexa did a great job. Love to see how the smaller one works out
Hopefully will have the c2 review up within a month!
Thank you for watching! The C2 is super sleek looking. I'm excited to get it up and running. It looks like it would be a great solution for at-home miners.
Nice job, Alexa. You and Drew and Tails are a fun family. Your enthusiasm for crypto mining and expertise are inspiring. Thanks for all you share.
Thanks for watching! I'm glad Tails let me do a video for a change ;)
Love a good single loop.
lol amen brother!
I might want to use the mini DCX for my pool where I can run pool water through the heat exchanger. Still thinking about this option.
Beautiful job with this video, Alexa! Great info, very clear & concise!
Thank you! 💜
Great review. Immersion seems to be the way to go.
Awesome review! Great job!
Good job on the review!
Looks like you still need to take some fluid out. You will get better cooling performance with the hot aisle set and configured to spec. Right now you're not getting as much hot aisle isolation without dripping over the weir edge.
A bucket and red solo cup and scoop out a half a cup at a time with no mess, until your hot aisle fluid is about 1-1.5" below the edge.
Thank you! We're going to look into this and adjust. Appreciate the comment!
Will you do a video talking about the dimo miner ??
thanks Alexa.... I'm searching for the US supplier of dielectric fluid i think you were going to link... looks like a 2-3 year replacement of fluid so we are gonna need it down the road .. appreciate it
Good Job Ms Vosk, you nailed it on this.
Thank you for watching! ❤
Awesome job!!!@
wow i actually enjoyed the video, it helps that Alexa is so easy to look at
💜
Wow great video Mrs. Vosk!
Thank you!
hey guys! just wanted to know the wattage consumption in total after removing all the fans out... collectivelly with C6 and all 6 miners and also with dryer included...
💖Momma Vosk🚀
I like is low noise but a little bit messy and have to replace the liquid every 2, 3 years.
Also in Europe I have a hard time to find dielectric liquid.
Great work Alexa! Your electricity bill isn't to high after the halving ?
Thank you! We're working on getting three phase installed, which will reduce our electric rate and help keep us profitable. I'm also thinking Bitcoin's price will go up.
Hope it will be be enough for you guys. Though days ahead@@missvosk
I would turn on the "water curtain" it will lower your electric bill.
What do you think will happen when Bitcoin is all mined up do you think it will collapse in price will a different crypto currency take its place also if the having causes bitcoin to become less attractive to mine do you think it would collapse?
seeing you guys trying to get that plastic barrel of the truck made me think : youre lucky it didnt bust wide open upon landing on the ground , mightve been eazier (in hindsight) to get a longer hose on that dieselpump and empty the barrel while it was sitting in the bed
back on topic you want to make more bitcoin and youre thinking on expanding youre operation and run more miners
the newest antminer (the s21) has a hashrate of 200 at 3500 watts
(there faster versions but they use more power and might put you over the capacity of youre current grid )
at this moment i can buy a s21 here in the netherlands for about € 4469,28
the s19 does about 110ths at 3250 watt so youre making 660ths at 19500 watts
i think it be cheaper to upgrade youre current 6 to the newer s21 as the hashrate is 200 ths at 3500 watt so say you about at the max power you can use so you can run 5 of those and one at a lower power (or all at lower power ) and make 1000ths at 17500 watts , and use less power doing it
and you dont need to buy another submerging tank and hardware , oil yadahyadahyadah (guessing thats about 10000 right there and no 2nd tank means no extra electrics to run it ) and you still need to buy 6 more miners to run in it those are 22.506 euro together , so you pay 10.000 (euro) less for the 310 les extra terrahash per second but 13,85 per day less profit (means it takes about two years or so to turn that extra profit intoo a return on investment if you where to spend that extra 10000 dollar in material )
probably be up and running faster too as you only switch out the miners for newer ones
Profit per day $ 12.83
DayPool Fee $ 0.5539
Mined/day Ƀ 0.0008148
Power cost/Day $ 42.00
Profit per week $ 89.84
WeekPool Fee $ 3.88
Mined/week Ƀ 0.005703
Power cost/Week $ 294.00
Profit per month $ 385.04
MonthPool Fee $ 16.62
Mined/month Ƀ 0.02444
Power cost/Month $ 1,260.00
Profit per year $ 4,684.64
YearPool Fee $ 202.17
Mined/year Ƀ 0.2974
Power cost/Year $ 15.33 k
this was at the 0.10 cents a kW electric you mentioned , youre estimation was a bit off and youre profit seems to be based on 0.075 cents per kW
based on youre mentioned electric price it would be :
Profit per day $ 23.33
DayPool Fee $ 0.5539
Mined/day Ƀ 0.0008148
Power cost/Day $ 31.50
Profit per week $ 163.34
WeekPool Fee $ 3.88
Mined/week Ƀ 0.005703
Power cost/Week $ 220.50
Profit per month $ 700.04
MonthPool Fee $ 16.62
Mined/month Ƀ 0.02444
Power cost/Month $ 945.00
Profit per year $ 8,517.14
YearPool Fee $ 202.17
Mined/year Ƀ 0.2974
Power cost/Year $ 11.50 k
note that thats allmost twice the profit that you make today with the same cooling setup with less miners than youre running now (less heat produced ) and youre using less energy and a return on investment in about 2 years (?)
now to run those extra miners you need to upgrade youre grid , hey theres room on the grid now for a 6th s21 being dropped in the still open spot in the tank .... lets see here wat 6 of those puppies churn out :
Profit per day $ 61.66
DayPool Fee $ 0.6647
Mined/day Ƀ 0.0009777
Power cost/Day $ 4.14
Profit per week $ 431.63
WeekPool Fee $ 4.65
Mined/week Ƀ 0.006844
Power cost/Week $ 28.98
Profit per month $ 1,849.85
MonthPool Fee $ 19.94
Mined/month Ƀ 0.02933
Power cost/Month $ 124.20
Profit per year $ 22.51 k
YearPool Fee $ 242.60
Mined/year Ƀ 0.3569
Power cost/Year $ 1,511.10
and thats with only an extra 4000 for the extra 200th/s miner and the upgrade to the grid you needed anyway if you want to rin those 6 110 ths miners , makes you think doesnt it ......
allso it might get a better profit ratio if youre using solar panels to partly power the mining farm , you whont be feeding power back intoo the grid but on sunny days you could save on power usage
one panel produces around 1.5 kilowatt-hours (kWh) of energy per day.(0.15 cents),,,,,,,,,,,,,, hmmmm with the cost for electricity where youre at that might not be enough to offset the purchase of those
I know you probably get it all the time but I have been through a real rough patch recently...The airport I guess thought my power supplies were some kind of bombs or whatever they took them...I really want to get this all up and running but even my motherboards are not working on a friends old power supply...any help would be great
Did the B6 pump sound from the end of the initial setup video stop/get much quieter? I can’t hear it in this video
Do you ever have to clean or filter the coolant in a single or dual loop?
so how do electornics work under water? I know you can clean your computer with isopropyl alcohol but how do you submerge the whole thing in water?
It's not water! It's dielectric fluid, which is almost like an oil consistency.
love watching these videos at least Shes prettier than he is. HI HI thanks for making all the videos i learn a lot.
I purchased the C6 unit a month ago and am waiting for delivery. I chose this over the DCX due to the issues you had. I was really hoping to get a DB meter reading on the dry cooler though. I'm wondering about initial install though. You had an experienced team helping, I'm doing it by myself. I've tried reaching out on your forum but got no replies. I'm looking for anyone I can reach out to during the setup for advice. If there is any way I could get some (very minor) help in terms of just some questions during install that would be great. Depending on how this works out, I may be getting their BC10 or BC20 container solution for a rural property I have.
Ironically I replied to your forum post about an hour ago lol
@@VoskCoin Thanks, I didn't get a notification, so I guess ill have to manually check.
I've deployed a couple of the B6D's. The C6 is a simpler design with less things to have to worry about. Happy to help. Your electrician and them wiring to spec will be the only real complication. The C6 doesn't have the same pump hose vibration issues. Check my comments on the first B6D video as well, for info on that.
get your rate down you will get squeezed! Good luck
Alexa should do this more often
💜
I couldn't understand how you can pour the coolant liquid on the Miner.
Doesn't the liquid enter the miner and spoil the circuit board & fans and what it is going to do the LIVE electricity that is plugged in.
Could anyone explain this. Sorry I am new to this.
The liquid is dielectric fluid, so it’s safe for electronics.
@@missvosk Thanks
Yellow liquid? You sure you've not been cutting corners? lol
Watch the install video to see why
The liquid came crystal clear, but we used a pump to get it out. The hose on the pump had some old liquid left inside which made it yellow. We've seen no performance issues whatsoever from this.
It’s a joke about using urine
You forgot the 10 seconds of tails 😊
I noticed right after I shot it! Clearly I’m still a noob 😭
@@missvosk You are great thanks for all the great video's
I got this message after I added my home address. Sorry, we do not ship to your address.