Thanks for your video. I thought I was putting it together wrong at first because I had the same issues as you with the riser pieces not feeling tight. My screws to assemble the riser to the top tool compartment as well as to the bottom cabinet were even looser than yours, which drove my ocd insane! 🤣 Plus, having a baby, I didn't want to take the risk of injury should that solid, heavy toolbox on top come loose and fall… so here’s my solution that worked RELLY well… First, after using all the necessary screws I had a few extra pieces, two of which were extra locking washers. I slid these around the screws for the underside panels attaching the riser to the top compartment. I then found four small wide washers and inserted them in between all four screws attaching the riser down to the bottom tool cabinet. It made a huge difference and made the whole thing feel much more secure and not so wobbly. I wish the manufacturers had figured this out vs me having to through trial and error, but better late than never! Hope this helps someone else!
That sounds like it worked real well. I'm glad it helped. Thanks for watching. Don't forget to like, comment, share, and subscribe. You know the routine.
I am really happy you did a review and assembly. In the instructions they say to throw away the first 4 hh screws but those are the ones you use to assemble the case. Thank you.
I just bought one of these for all my tattoo equipment and it fits everything....I also mounted 4 flex led lights and 3 of the power strips with USB plugs as well as 8 foot plugs.this box might be cheap but it's nice and it's not to big n bulky like my last husky box was.also your video helped me figure out how to get the chest out lol cause I was like "what in the world did they do here?"🤣
Thanks for watching. I bet it's perfect of what you have described. It does seem to be pretty good quality. Don't forget to like, share, subscribe, and follow. You know the routine!
Want one for my tattoo equipment as well …. You should upload a video of how yours came out bro with the lights and everything. And definitely not cheap idea I’m sure it works out just as good as any high end rolling cart would for its price 💪🏽
I also went to youtube to find a video for unpacking. Trying to see how to get the top chest out of the bottom chest. This was PERFECT! Thank you for posting!
Thanks for the video!! Sure helped me. I didn't like the way the riser was loose though, so them bolts they say to discard..I took them washers and used them. I put them on the front holes and it made a heck of a difference.
I'm glad you liked it, and it's cool that what you did worked for you. Thanks for watching. Don't forget to like, share, subscribe, and follow. You know the routine!
Awesome! Thanks for watching. I'm enjoying mine so far, and I hope you like yours too. Don't forget to like, share, subscribe, and follow! You know the routine.
I could not find any back holes to connect the upper tool box to the side panels. The holes were there but no receiving holes. So that top tool box is only secured with two screws in the front. I’ll have to drill the holes.
I finally looked at mine, and it did have two tabs in the back that I was able to attach it with. Mine is attached with 4 screws, but if you did have to drill yours I don't think it would hurt. Thanks for watching. Don't forget to like, share, subscribe, and follow. You know the routine.
I have a drawer that won't close due to something blocking it in drawer below... how do you remove a drawer can't seem to find release on these side Rollers
I looked the other day because of a similar comment, and I didn't see a way to get them off. If you find one let me know. Thanks for watching. Don't forget to like, share, subscribe, and follow. You know the routine!
Thanks for watching. I never really thought about it not being lockable. Lol. You are right though. Don't forget to like, share, subscribe, and follow. You know the routine!
Thanks for watching. I just looked at mine, and I didn't see any easy way to pull the drawers off. It looks like you would have to damage them to get them off. Why did you want to take them off? Thanks for watching. Don't forget to like, share, subscribe, and follow. You know the routine.
On mine it has a tab on each side of the drawer. It threw me off because one side the tab has to be pushed up and the other side has to be pushed down to remove drawers. Hope this helps!
Can you please tell me how tall the bottom part of the cabinet is the outside from where the Caster said on the floor to the top with a riser starts how tall is the.
Hey, thanks for watching. I just went to the garage and measured from the floor to the top of the lower cabinet, and it was 27 1/4 inches. I hope this helps! Don't forget to like, share, subscribe, and follow. You know the routine!
That helps tremendously. I need to put the bottom part underneath a tool bench to make it fit in my area appreciate it big time thank you I'm trying to find that out for 6 months now
Thanks for your video. I thought I was putting it together wrong at first because I had the same issues as you with the riser pieces not feeling tight. My screws to assemble the riser to the top tool compartment as well as to the bottom cabinet were even looser than yours, which drove my ocd insane! 🤣
Plus, having a baby, I didn't want to take the risk of injury should that solid, heavy toolbox on top come loose and fall… so here’s my solution that worked RELLY well…
First, after using all the necessary screws I had a few extra pieces, two of which were extra locking washers. I slid these around the screws for the underside panels attaching the riser to the top compartment. I then found four small wide washers and inserted them in between all four screws attaching the riser down to the bottom tool cabinet.
It made a huge difference and made the whole thing feel much more secure and not so wobbly. I wish the manufacturers had figured this out vs me having to through trial and error, but better late than never!
Hope this helps someone else!
That sounds like it worked real well. I'm glad it helped. Thanks for watching. Don't forget to like, comment, share, and subscribe. You know the routine.
I am really happy you did a review and assembly. In the instructions they say to throw away the first 4 hh screws but those are the ones you use to assemble the case. Thank you.
I'm glad that my video helped. Don't forget to like, share, subscribe, and follow. You know the routine!
Had mine for about 5 years now..really last..really good for basic tools for your garage for beginners ..highly recommend
Thanks for watching. I agree, so far it's been a nice little toolbox. Don't forget to like, share, subscribe, and follow. You know the routine!
I just bought one of these for all my tattoo equipment and it fits everything....I also mounted 4 flex led lights and 3 of the power strips with USB plugs as well as 8 foot plugs.this box might be cheap but it's nice and it's not to big n bulky like my last husky box was.also your video helped me figure out how to get the chest out lol cause I was like "what in the world did they do here?"🤣
Thanks for watching. I bet it's perfect of what you have described. It does seem to be pretty good quality. Don't forget to like, share, subscribe, and follow. You know the routine!
Want one for my tattoo equipment as well …. You should upload a video of how yours came out bro with the lights and everything. And definitely not cheap idea I’m sure it works out just as good as any high end rolling cart would for its price 💪🏽
I also went to youtube to find a video for unpacking. Trying to see how to get the top chest out of the bottom chest. This was PERFECT! Thank you for posting!
Thanks for the video!! Sure helped me. I didn't like the way the riser was loose though, so them bolts they say to discard..I took them washers and used them. I put them on the front holes and it made a heck of a difference.
I'm glad you liked it, and it's cool that what you did worked for you. Thanks for watching. Don't forget to like, share, subscribe, and follow. You know the routine!
Picked one of these up on clearance after watching your video to see if it wasn't a total waste of money. Handy lil tool box for $100.
For what it is, and the cost, it isn't bad. Thanks for watching. Don't forget to like, share, subscribe, and follow. You know the routine!
Got mine today. Had to drill the holes for the screw to fit. Made it work.
Awesome! Thanks for watching. I'm enjoying mine so far, and I hope you like yours too. Don't forget to like, share, subscribe, and follow! You know the routine.
Nice job!
When you put the side panels A. C. B together A goes to the left. Put the door panel in place before attaching tool box.
Thank you very helpful.
Thanks for watching. I'm glad it helped. Don't forget to like, share, subscribe, and follow. You know the routine.
I could not find any back holes to connect the upper tool box to the side panels. The holes were there but no receiving holes. So that top tool box is only secured with two screws in the front. I’ll have to drill the holes.
I finally looked at mine, and it did have two tabs in the back that I was able to attach it with. Mine is attached with 4 screws, but if you did have to drill yours I don't think it would hurt. Thanks for watching. Don't forget to like, share, subscribe, and follow. You know the routine.
Mine did come with wheel locks
Nice.
I have a drawer that won't close due to something blocking it in drawer below... how do you remove a drawer can't seem to find release on these side Rollers
I looked the other day because of a similar comment, and I didn't see a way to get them off. If you find one let me know. Thanks for watching. Don't forget to like, share, subscribe, and follow. You know the routine!
Necesitas un desarmador más largo como para mayor torción y del no. 2 por ejemplo un truper
This would be perfect if it was lockable
Thanks for watching. I never really thought about it not being lockable. Lol. You are right though. Don't forget to like, share, subscribe, and follow. You know the routine!
How do you take the drawers off if needed ?
Thanks for watching. I just looked at mine, and I didn't see any easy way to pull the drawers off. It looks like you would have to damage them to get them off. Why did you want to take them off? Thanks for watching. Don't forget to like, share, subscribe, and follow. You know the routine.
On mine it has a tab on each side of the drawer. It threw me off because one side the tab has to be pushed up and the other side has to be pushed down to remove drawers. Hope this helps!
👍
Glad you liked it. Don't forget to like, share, subscribe, and follow. You know the routine!
Tack weld it fuck the screws
Can you please tell me how tall the bottom part of the cabinet is the outside from where the Caster said on the floor to the top with a riser starts how tall is the.
Hey, thanks for watching. I just went to the garage and measured from the floor to the top of the lower cabinet, and it was 27 1/4 inches. I hope this helps! Don't forget to like, share, subscribe, and follow. You know the routine!
That helps tremendously. I need to put the bottom part underneath a tool bench to make it fit in my area appreciate it big time thank you I'm trying to find that out for 6 months now
There is a lip that runs around 3 sides that is probably 1/2 in. Taller, so be safe and call it 27 3/4.