Ikea ALEX Desk Assembly instructions
Вставка
- Опубліковано 3 жов 2024
- Ikea ALEX Desk Assembly instructions. A detailed video on how to assemble the Ikea ALEX desk. Modern-looking ALEX desk has a finished back and opening storage space for your cable management. You can get an Ikea ALEX desk in two different sizes. The one in the video is 132cm/58cm and the smaller version is 100cm/48xm. The Ikea ALEX desk has two drawers at the front. You can get an Ikea ALEX desk in the USA in three different colours and it cost $229. In the UK 3 colours and it cost £179 and in Europe 3 different colours for €169. Let me know in the comments how your Ikea ALEX Desk assembly goes.
If you like to support my channel:
Viewers can purchase a Super Thanks on a video to show their appreciation, and then post a colourful comment. Thank you ;)
/ ppflatpack
Thank you for your support.
**Tools I'm using **
Small electric screwdriver
amzn.to/2AYddCK
Bigger drill and screwdriver all in one
amzn.to/2RJMJiP
For more tools for furniture assembly or general DIY adventures.
www.amazon.co....
Music:
Epidemic Sound
www.epidemicso....
Some of the links above are affiliate links, where I receive a small commission if you click on the link and purchase an item. There is no extra cost to you but it helps me a lot. You don't have to do so, but it does help fund these videos that I hope to bring value to you.
Here is my stuff :
www.ppflatpack....
ppflatpack@gmail.com
/ ppflatpacklo. .
/ ppflatpacklo. .
/ ppflatpack
/ ppflatpack - Навчання та стиль
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Thank you!! Those hinges were awful... I was doing so well, sailed through with no problems -- to literally step 27 of 28 :)
Sameeeee
Thank you that was great, I would not have done this correctly the first time without your step by step instructions!!!
Glad it worked for you. Thank you for watching
Yep, those hinges got me. Thanks for your easy to follow instructions!
I had them UPSIDE DOWN! I was like how is he clicking them in with ease. 😅
Also this could be ASMR for me, IKEA furniture is usually a source of frustration but this video was so soothing, clear, and made it easier for me. Thank you
Thanks much for a great video! You saved me from continuing to curse and possibly take a sledge hammer to the desk. Not sure why the genius' at IKEA couldn't include better instructions about those stinkin' hinges!
FOR ANYONE WITH PROBLEMS WITH THE HINGES: (use the translator)
- Comprueba que la pieza atornillada a la mesa está en el sentido correcto (la flecha hacia arriba)
- Comprueba que los tornillos están bien atornillados: hace falta que no sobresalgan para poder enganchar la bisagra
Si estos pasos están bien fíjate en que la bisagra tiene una pequeña barra que debes enganchar en el hueco de arriba
Después de haberlo enganchado, empuja un poco hacia abajo para encajar bien la barra en el hueco y, en la parte inferior presiona para que haga "click".
Good luck! You'll make it! (i did after one hour 😂)
Gracias te amo
This was such a helpful and useful video. Thank you so much 😊👍
Thank you for watching
For the hinge flap 6:50 make sure arrow is towards color part of piece…12:50 stand from the angle he is standing to get the hinge to go in top part and then snap the bottom.
Thank you for uploading this!!!
Great video thanks! Check your clips are the right way around before attempting to clip the back panel to it. We had upside down and couldn’t work out the problem !! 😅
Excellent video!! Thank you! 🙏
Çok teşekkür ediyorum 🎉 sayenizde kusursuz bir kurulum oldu. Emeğinize sağlık
10:26 - what the fuck? Your cross bar fits properly?
How did you guys make it fit?
Thanks again for another helpful assembly...
SO HELPFUL!! Thanks!
That hook and clip thing is just fucking pain in the ass!!!
You aren’t kidding! That part is horrible.
I can't figure the fucker out
I am so mad right now trying to clip it in
This is me right now!!!
You may have the clasp hinges on upside down. That was my mistake.
Really Helpful video thanks so much
I’ve given up after 4 days trying to do the hinges. I’m over it
Bravo!! 🎉 gracias complete 100 %
Thanks 👍🏻
Thank you
Legend! Thank you!
Thanks bro👍👍
This was so helpful- Thank you for making this video. Ikea directions are so confusing on paper.
Glad it worked for you. Thank you for watching
Good work bro thank you 👏👏👏
Teşekkür ederim, sen olmasaydın kuramayacaktım. (Masanın malzeme kalitesi çok iyi olmasa da masif bir etkisi var)
I accidentally did 6:58 but didn’t put the screws all the way in as they stopped for me and thought they couldn’t go further in. I don’t have a electric screwdriver 😭 so when I went to do step 13:00 ofc the hook didn’t work bc the screws are in the way 🥹🥹 I don’t think I can take everything apart again but do you think a mini electric screwdriver will fit within the desk to make the screws go more in the little hooks in step 6:58 ?
There’s two versions of this build, around 4:40 the piece doesn’t always come how it does in his version. You have to screw it then slide it in another version.
Thank you bro I restarted this shit like 10 times and I couldn’t figure it out till now
IM STUCK HERE HOW DID YALL DO THIS PART?!
Please help me! I just purchased this last week, when attempting to add the rails, the holes don’t line up properly. My rails don’t even look like yours or the manual’s. I went back to IKEA, got all new rails because I thought it had to be some error but, they were the exact same as what I already have!
4:26
^
Did you get it figured out? Mine were the same as the ones in the video but it was bought months ago. Maybe IKEA changed them and a more recent video would show “new “ rails..?
Mine doesnt line up as well, super shit product
Useless video. The brackets are impossible
Should one of the desk legs be smaller than the other? I’m having trouble getting the legs lined up with the middle bar and I’m wondering if I was given the wrong part?
Thanks very good explanation and ikia new sliding door came can u make on them vedio pz
Yes new video on updated Ikea pax sliding door’s coming. Thank you for watching
At 10:33 I cannot get that cross beam to slide all the way into the slots. It's as if the tabs on the beam don't have enough space to fit into the slots on the legs. Any suggestions?
I have the same issue right now. Were you able to figure it out? Or does anyone else has tipps?
I have the same problem did Amy of you guys figure it out?
hello as u said the desk is 132x58 is it possible to shorten into 130x58? I have a designated place for it and it can only fit a 130.. and idk what to do pls help
When attaching the bottom part of the desk, shown at 8:57, I am unable to do it properly, I can get the wooden pegs in but then the main screw in the middle is out of alignment, if the main screw in the middle cab get aligned, then it means that not all the pegs can get in. Does anyone have any tips for this?
true story. just assembled mine today, I wish it took 15 minutes! lots of things don't align, neither does going to ikea! it:s like walking into a playground, although the desk was on sale!
@@philafflack1298 same heree its doesnt line
What I did was just get rid of the wooden pegs in the middle and have everything else align and then put in the middle screw. :/
@@mochiwonders sollution: smash all the wooden thingys into the holes with a hammer, if they are not all way in they dont align
Can we make it a floating desk without the legs ?
I thing you would need some support under. The Desk is quiet heavy possibly some L brackets if you have solid wall. If plasterboard I found not recommend to do the floating desk.
The little hinge at around 7 minutes--the white plastic covering the screws is not going all the way in. Did I do something wrong?
Once you secure the screws it should go all the way in
Dear Ikea: fuck those hinges.
Супер
👍👍👍👍👊
Thank you again! Very helpful!
Thank you for watching again ;)