This is exquisite. I have watched your video about 20 times. I am using it to help me build a cardboard Strandbeest very much like yours but about 14 inches tall and 16 to 18 inches long. After I have expanded my understand by doing this I hope to build a wooden one about the same size to work out my design. In a few years I hope to build a wooden Strandbeest that I can ride on. Thank you for doing such a fine job of showing what you did.
this is a real thing developed by theo jansen and it being used for keeping the coast of some european countries from shrinking by erosion of wind and water and soon, they will develop intelligence
Most people may think this is odd and useless, but it is originally created by Theo Jansen and there is a fan infront.it can turn wind energy and convert into movement energy.
@@vishalmanjunath170 suppose a triangle is to be made with side A=5cm, B=6cm and C=3cm. So we draw side B=6cm with a scale, next we take a compass and measure 5cm, we put the compass needle on one end of line B and make an arc on top of B. Then we take the compass again and measures 3 cm, we put the compass needle on the other side of line B and make another arc on top of line B. The common point where the arcs meet is gonna be the tip of the triangle. Hope thats clear
@@gurmeharsingh2333 if you obviously have the angles then why don't you just tell us them instead of us having to figure it out on our own. It is called a how to for a reason
Very cool! What kind of wire did you use for the crank? I have been trying to making a very similar design, but the legs and body are 3D printed. The 1/8 in diameter steel piano wire that I tried to use to make the crank wouldn't bend 90 degrees without breaking, much less twisting it another 60 degrees. I have been redesigning the crank as a result.
a buddy of mine did something like this with a few motors and a ruumba sensor. It was actually able to navigate it;s surroundings. He then later upgraded it to map out his house (well one floor) and then upgraded it a gain to be able to correct itself, so it was then able to go up and down stairs. Well down was easy, it would just fall, but going up was a different story. In teh end it only had a few hours of life before needing to recharge, but h had it run around the basement and it was rather eerie.
This is exquisite.
I have watched your video about 20 times.
I am using it to help me build a cardboard Strandbeest very much like yours but about 14 inches tall and 16 to 18 inches long. After I have expanded my understand by doing this I hope to build a wooden one about the same size to work out my design.
In a few years I hope to build a wooden Strandbeest that I can ride on.
Thank you for doing such a fine job of showing what you did.
Such a majestic creation. The organic movement of the ‘legs’.
Fantastic recreation of this unusual machine. Thank you!
That's Theo Jansen's mechanism.
Perfectly good
For the first time in my life i save his face
Nice creation by the way 😊
Lol😂
As always, the execution and shooting are amazing, but the odd thing is strange
ua-cam.com/video/HepaQN9VE-4/v-deo.html
@@derkmaser5580 wot
Everything about this channel is so great!!!!
I agree, awesome DIYs
Thanks for the simplified build. It's very helpful!
Like a real creature and original robot ,you deserve it
This shows that Crafts are getting very advanced nowadays. Really very cool stuff!
Really cool
this is a real thing developed by theo jansen
and it being used for keeping the coast of some european countries from shrinking by erosion of wind and water
and soon, they will develop intelligence
It's the only video in UA-cam I have liked at the first seconds
Вы заслуживаете 10 миллионов к югу 😍
Amazing video and build well done.
I love how you make card board and paper look so sturdy
Wow...very very good👏👏👏👏👏
I'd be impressed with myself if I even managed to make the wire with the loops on
@Mad Man that's exactly my point
Amazing 👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Adam would be proud!!
Awesome Creature👏👏👏❤❤❤
Woow it's Brilliant idea . Love your Videos
*_Amazing idea_* 😉😉👍👍
No te mentir está vez sí que te luciste con este invierno
Looks like a spider and it's awesome
Wow Amazing walking robotic
ありがとう！！😂 the Q大好き！😍
Most people may think this is odd and useless, but it is originally created by Theo Jansen and there is a fan infront.it can turn wind energy and convert into movement energy.
*Always creative bro👍👍👍👍*
ua-cam.com/video/HepaQN9VE-4/v-deo.html
I like your re creation of the strandbeast!
It's a total cutie!
Strandbeest (Dutch) = Beach Beast (English)
Once again, you make my day... thanks !!!
Next could be the wind creature ?
سسسسسسسسخخخخخيييييففففففف
Bro where are the angles when we are drawing the legs in 0:20
U dont need angles to draw them correct lol .
You've got three sides
@@gurmeharsingh2333 how do you draw them?
@@vishalmanjunath170 suppose a triangle is to be made with side A=5cm, B=6cm and C=3cm.
So we draw side B=6cm with a scale, next we take a compass and measure 5cm, we put the compass needle on one end of line B and make an arc on top of B.
Then we take the compass again and measures 3 cm, we put the compass needle on the other side of line B and make another arc on top of line B.
The common point where the arcs meet is gonna be the tip of the triangle.
Hope thats clear
@@joseregalado3950 how does this help 👎
@@gurmeharsingh2333 if you obviously have the angles then why don't you just tell us them instead of us having to figure it out on our own. It is called a how to for a reason
Your hand is SO pretty
Great job ✨👍
Wow! 😯 This is exciting😀👻
very creative 👍👍
Tomara que a NASA teja assistindo ótimo vídeo parabéns____( hopefully is NASA watching this video congratulations...)
Четкая работа...все выверено😉👏👏
Absolutely amazing! It's a walking robot thingy.
Woww! That is super awesome!
Nice video for DIY Walking Robotic Creature Strandbeest......by....tha q......i like this a new video........
すごい....素敵！ I like it.:)
cool👍. And for the size thank you.
So clean
Wwooww amazing.. i like it
Let him do this thing - goxp.ru/84-predstavlena-unikalnaya-elektricheskaya-podvodnaya-lodka-deepflight-dragon.html Support like!!! PLSSSS
So unique and creative! You gotta make more stuff like this😁
4:05, it seems like it is moonwalking
my favorite channel
great idea!
This man is amazing ! Just incroyable ! I think he is really good for science
It was a very successful work
Hi the q.... You are real star of diy...
These seem simple but they're very technical actually. 🤔. They're great . Put a motor in it.
Cool ! You should really try the Theo Jansen's helium filled flying saucer.
GENIUS, SUPER GENIUS
Very cool!
Could you try to motorise it ? like adding a little motor that turns the wire ? or would it be too heavy for the paper to hold its form ?
Looks easy and quick
And fun
That's so damn cool man!!!!! Very nice job
Sản phẩm của bạn thật tuyệt. Bạn là một người sáng tạo giỏi
Your videos are weird ? But like, satisfying to watch ? Really good really good ! Sub
That... is cool af.
Intelligent......👏👏👏
wow that was awesome
Very nice...........!
When you made the first leg and stirred it was funny 😂😂😂😂👍👍👍👍👍
Wowww,,,, amazing
I was expect to see an electric motor and a few gears. Great vid though 👍🏻
Wow! Ver nice
Wowwwwow.. Amazing!
I used to have a remote control one of these. It was really cool.
Amazing
I'm korean you are so good!!~~^^~~♡!
That's well cool 👍
Susubukan ko gumawa nito ang ganda talaga
Very interesting and neat
Wow amazing!!!
Fully mind blowing
Very cool!
What kind of wire did you use for the crank?
I have been trying to making a very similar design, but the legs and body are 3D printed. The 1/8 in diameter steel piano wire that I tried to use to make the crank wouldn't bend 90 degrees without breaking, much less twisting it another 60 degrees. I have been redesigning the crank as a result.
Where do you get that great quality cardboard? And how can that utility knife cut the cardboard so smoothly at 2:35? Great vid Btw👌😀
This is insane stuff... from where 🤔🤔do you get so many ideas from... how you make it look so simple..awsme stuff bro..👌👌✌✌👍
He didn't come up with it Theo Jansen did
Очень круто молодец!
Genius☝👍👍👍👏
I had made it as my project in my diploma as well as bachelors.
you are a genius
what is the name of the music at 4.02? It's very cool!
pure genius
Hello my name is Muhammad Yasin, I am from Indonesia, can you make a camera tripod from cardboard
Now add a small DC motor to make it walk
a buddy of mine did something like this with a few motors and a ruumba sensor. It was actually able to navigate it;s surroundings. He then later upgraded it to map out his house (well one floor) and then upgraded it a gain to be able to correct itself, so it was then able to go up and down stairs. Well down was easy, it would just fall, but going up was a different story.
In teh end it only had a few hours of life before needing to recharge, but h had it run around the basement and it was rather eerie.
@@x_x5009 Canada
That is exactly what i was going to say
@@x_x5009 where abouts?
It is amazing!
Very cool
Not Ingles, por favor me podrías enviar las medidas para realizar los dobleses del acero y los ángulos correspondientes. Gracias
That was sooper
Useless but really cool 👍
in future: how to make an diy robotic apocalypse weapon out of cardboard
You should make it better, like automatic walking, left-right turns etc.
And it looks like the machine from Black Mirror, Metal head episode
Its called strand beast guys👍
good
Superb! man. make the robotics tutorials
all you need to do now is to power it😎
한국인 손!!
It is Soo usefulll omg 🤩
Is it sturdy enough to motorize it?