Building a Crown Vic Swapped F100 in Ten Minutes
Вставка
- Опубліковано 5 жов 2024
- Today we will be reviewing a 1969 Ford F250 that is utilizing the chassis of a 2008 Ford Crown Victoria Police Interceptor. The swap is utilizing the full cab of the truck and taking patch panels from the crown vic for the brake master cylinder as well as the HVAC unit. Suspension is Viking coilers in the front and RideTech Coils, adjusters and shocks in the rear. Braking has been upgraded to Mustang GT500 rotors (13') and Corvette C5 calipers. Interior is push button start for a little flare in combination with full TMI interior and flaming river column. Enjoy
Thank you for supporting “FactoryFresh” you can follow us on the Social Media Links Below:
Instagram: / factoryfresh
Facebook: / dustin.nelson
UA-cam: / factoryfreshchannel
📧 Feel free to reach out with ways to contribute to the channel at📧
Email: factoryfreshgarage@gmail.com
Mail:
Factory Fresh Garage
PO Box 77
Hooper, Ut 84315
I loved how you are incorporating your kids.
For me, that’s what it’s all about!! I wouldn’t be outbuilding stuff I I couldn’t have my kids having fun with me!! Thanks for watching!
Did a great job with this body swap, watching your new build now. You do pretty work.
Thanks!!
Cool stuff, didn't know you did the bump before the uni. Look how small your helper was. LOL. Cheers.
Haha yeah I know! With the videos on the channel it was the slick/Vic swap then bump/Vic now the Uni and zephyr. Thanks for watching!!
I didn't know this was a thing. It would be a fun drive! Nice work.
Thanks!
Excellent video and great job on the swap!!!!!!! 👍👍👍
Hey thanks man!
@@FactoryFreshChannel You do nice clean work and your vids are very well done too! Really enjoy watching them, hope you start making more videos. I know they take a lot of work but I think you have a talent/channel that could really take off in the near future.
Nicely done Man! I see you left the trim off, looks clean. I’ve spent hours and hours straightening the trim on my bump side.I could use those tail light bezels and tailgate trim for my 71.
Wow. I just found my new favorite channel. I am collecting parts to do a 88 k5 on top of an 03 tahoe
Hell yeah! That should be a cool build!
Do you do all of this in a 2 car garage? You're my hero. I'm building a 62 Falcon for drag n drive stuff in my 2 car garage. I spend almost as much time cleaning the garage as working to keep the wife happy about not tracking welding/grinding/sanding dust in.
We’ll technically it’s a three car garage haha. Yeah I feel your pain, my wife has never parked her car in the garage since we’ve owned the house, she likes to remind me of that often. I love those year Falcons, I’d like to have one some day. Good luck with the build!!
Very nice build man!
Thanks!!
Beautiful work buddy
Thanks man!!
Wheels look good
Thanks, yeah they look pretty good!
Fantastic Video and Great Job. Truck looks great
Thanks 👍
Clean job congrats on a cool ride. On my 79 I just used the crown vic front suspension upgraded of course and a four link in the back upgraded of course. I beefed up the small block and added a top loader. I kept the body stock only with new black paint but I like your choices all the crazy wiring on new cars was not for me I like simple even keeping mine a long bed with all the trim. Oh yeah great choice on tires and wheels in that respect we were on the same page. Again excellent job may you get many years of enjoyment out her. Looking forward to the next one keep up the good work.
one
Thanks brother! That 79 sounds like a cool truck! Check out the Mustang F100 body swap I’m doing now! It’s crazy!!
@@FactoryFreshChannel I'm thinking of trying this with my 80 D100 short bed step side. I have a 11 P71 I no longer use, the wiring od is the scary part for me.
Everyone making them into a general Lee
Have a xtreme blazer. I want my wheels to sit in the fenders like that.
I hear that! Gotta get the stance right!
I have seen this done a truck.I have a spare Crown Vic that this would be perfect for.
You selling
I'm very interested in doing this to my 1971 ford f100
Beautiful! Good stuff
💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾🔧 ing 💙... Great turnout 💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾🔥
Que buen trabajo 👌🏻
Beautiful build! How precise did you have to be with splicing in the pieces of Vic firewall, or could you explain how you figured out how to place them?
The HVAC portion didn't have to be precise, really just test fit where you want everything to hang under the dash. As for the brake booster/master that dictated where the brake peddle would be located in the cab. But overall not too difficult.
Very nice work. Looks sweet!
Considering a swap like this with a 79 f100. I love how you integrated all the Crown Vic stuff into the firewall, HVAC was one of my big questions. Question, what did you do for the gauge cluster?
This got a Dakota digital dash, but you can cut down the Vic cluster and make it look pretty good. Check out my other Vic swap video. That’s what I did on that one
Working on a 67’ flareside CV swap and had the same question about the gauge cluster. Contemplating between modifying the CV cluster to fit or splurge on the Dakota.
You win the best build award! I subscribed to your channel. Do you know when the first crown Vic swap was done? 1 of any notoriety? I'm curious because people laughed at me around 2010. I suggested taking a 1956 crown Vic four-door and put it onto a police interceptor crown Vic frame. Now somebody else might have thought of this but I came to me as I was looking at this beautiful 55 or 56 crown Vic four door. The car was beautiful. The engine transmission had been sourced out for some other project years before. I did measurements on the wheelbase and other items of concern.
I don’t. Everything sounds crazy to people till it’s done, that’s why I just do whatever I think would be cool, lots of haters. How cares have fun with it, that’s hot rodding. Thanks for watching!
@@FactoryFreshChannel somebody probably said that you ruined a good Ford pickup and maybe somebody else said you ruined a crown Vic. Sounds crazy but I do run into some people who like to crown vics and want to see them stay the way they are. Honestly it's the creation and the path to that point that makes the vehicle worth something. We all know that if it's a Chevy truck right now they bring in more money. But money aside when you start out with a better truck for this you have less patching in the product is better at the end. Man I've always despised Fox body mustangs. But if somebody has one and they're doing something with it and it's a car they want, I will encourage him to the Days end and beyond. It's all about keeping the hobby alive and find a new avenues to be creative.
@@CAROLDDISCOVER-1983 FACTS
Have a really good condition 66 f100 sitting around. Really really trying to figure out how to do this.
It has a title and its in good condition so it sucks it wont be original but thats how i want it.
👍enough said !
Thankyou Sir!!
lot of work, how many hours you have, any help from friends? you still amrried after al lthe time you spent onit?????? Looks great BTW
Haha mainly all on my owe. It’s my time to relax and work through stuff in the garage. Wife is super supportive and my kids are always out working with me or playing while I work so I enjoy that too. Not sure on hours but it’s a lot lol
Very cool.
Fantastico!
In the middle of this same swap on a 72 f250. I’m really mimicking what you’ve done looks fantastic. What did you do to the interior AC box? Did you have to modify at all? I’m on the step of mocking the firewall and about to start to to try and fit all this in. Just looking for some pointers. Thanks
I did end up cutting it down, I can’t remember exactly how though? Just looked at the box and deleted and capped some of the parts that looked overly bulky… good luck with the build!!
Nice 🥶
Thanks
Very nice build. Where did you source your corvette calipers? I’ve been looking with no success
Rock Auto
Is it possible to do this but lengthen the Vic frame and keep it long bed?
Yes. You would have to lengthen the driveshaft, brake lines, fuel lines etc
I'm getting ready to do this exact same thing with a 71 f250. I was wondering if it was any different then using a f100? I have never done this so I'm completely in a black whole here
This truck is actually a F250 also. So it’s exactly the same. Good luck!!
Ive build a few of these trucks myself. I was looking at the details! The truck looked great first of all. Could you tell me more about about the AC box you used on the inside i noticed it looked way smaller than the factory crown vic box! Did you cut it down or what box did you use on the inside. Thank!
Yup exactly, I just cut down the original box so it wasn’t so bulky under the truck dash. Thanks for watching! I love these swaps, great drivers!!
Nice build. What length is bed now? Total length did you shorten?
It’s cut to factory shortbed specs. I can’t remember exactly what I ended up taking out? Something like 5-6” front of wheel and a little more behind the wheel
Nice! Did you use epoxy primer under you bed liner? And what liner did you use? Thank you
It’s raptor liner. I color matched the cab portions and a custom color for the bed. I scuffed the bed etch primer then sprayed. Raptor liner is really versatile and easy to work with. I love that stuff
Hi, what steering column is that and what length? Really need to change mine and that looks nice and tight to the dash
It’s been awhile since I built that truck. Pretty sure it’s a flaming river.
What did you use/do for the steering shaft? I just put a front end on my 1973 f150
Column was ididit I believe and a Bergson shaft I cut and measured down
What instrument cluster did you use and did you have to delete the pats on cv
Dakota digital no anti theft it’s a police interceptor
What material did you use on the bed floor. That looks nice!!
Is it trex boards?
Yup trex
Awesome. Did you paint them?
Used raptor liner to put a light bed liner texture with a custom gray color tint
How did you attach them down to truck?
With the standalone harness and stock PCM do you run into PATs issues? Or is there a few wires you jump at the connector to override it? Or does it not matter with the standalone harness?
PATS varies on what you do and don’t use from the factory harness ECU. Worst case scenario you can turn it off with Hp tuners.
I'm wondering how much of the crown vic harness you used. After rewiring my 2009 engine. It almost seems easy to go stand alone using the stock pcm.
Yeah it is and would do it that way in the future. Way easier than factory chassis wiring harness. I used a aftermarket 12 or 20 circuit chassis harness with stock pcm to run the engine/tranny.
Bad A$$!!!! 👏🏼 👏🏼 👏🏼
How much if I provide the two vehicles?
Sorry I don’t do customer vehicles at the point, maybe in the future
Is that an F100 steering wheel???
It’s from a company called forever sharp. They make nice wheels for a reasonable price
What the difference between police interceptor to the stock crown Victoria front suspension 2003 tp 2011 please
Front suspension would just be the struts are quite a bit stiffer than the civilian vic
@@FactoryFreshChannel thks for your time and reply
How do you go about registering this is the title to the cab or the frame?
Cab has VIN. Just like any aftermarket custom frame you could purchase you wouldn’t change the title due to the upgraded frame.
Where did you put the filler neck?
Bed rail
Hey hopefully you see this message and respond to it,but I want to do exactly what you have done have a short need 79 f100 and a interceptor 05, was wondering if you removed all emission stuff like egr did you need to have the engine computer tuned or flashed? And what you do with all thee extra wiring like the rear doors wiring trunk wiring basically anything behind the 2 front doors
You can keep or remove the emissions stuff under the rear truck you won’t need to flash computer. As for all the chassis harness most can be removed. You need to keep the fuel pump and inertia switch which is in the trunk
@@FactoryFreshChannel thank you so much for this info I appreciate it
how many man hours start to finish
Took me a year or so to build, guessing around 300 to 500? Hard to tell I just worked on this one when I had time throughout the week. Thanks for watching
What wire harness did you do
It’s the factory ford harness
I want to see you use a crown Vic parts car only. You still use the truck frame. Then adapt all the different systems to fit the full truck frame. Dont: just remove the truck body and place it over the crown Vic chassis. Seems like you just took the easy way, and are still just driving a crown Vic.
BullyBilly.
If I was pulling just the parts it wouldn’t be from a crown Vic that’s for sure
I don't like when Crown Victorias get sacrificed like that...
No sacrifice no victory
I like where your heads at!!
If it’s all original then why mess with it
I have a feeling if I explained it to you you would never understand haha
See and I want to do the opposite. I want to make my 2006 crown victoria a 4x4 off roader.
Those are cool too!
Hey FF, check out this Corvette/Rambler Wagon Swap. Awesome Build ! ua-cam.com/video/1VmQCnW77mc/v-deo.html
As much as I love these swaps. Builders really need to stop hacking up the crown vics.
I like the truck But you people fuck it up with the shifter on the ground and with the horrible roll pan
Building stuff is all about personal preferences and styles. I like looking at all sorts of styles and hot rods, if we all did the same things all the time it would take away from the hobby. my 2cents