Very informative thank you. I changed my battery for a normal cr 2032 and the diving function does not work. I cannot find any cr2032H for sale. Any recommendations?
Hello, thank you for your message. To restore your dive function, please follow the repair procedure shown in this video I have: ua-cam.com/video/FF7aL5Lc-bs/v-deo.html Let me know if it works. As for the battery, don't worry - a good quality, regular CR2032 will work just fine in the watch. Best regards.
Hola Pedro, gracias por la pregunta. Efectivamente es un reloj muy bueno para su precio. Si tienes suerte encontrarás el recargable, el OMR-1, que es el mismo reloj pero con batería recargable. Tengo muchos comentarios positivos de todos los compañeros que los usan, tanto el normal como el recargable. Creo que te gustará. Un saludo!
Hi, I replaced the battery and all buttons stopped working. Do you what could be the problem? Do you know if the coper bended pins placed in front of it button should be in contact with the interior side of the watch? Because in mine, I noticed they are not touching. Thank you in advance for your help.
Hello! No, the pins only work as magnetic receivers for each button press (the buttons are all magnetic), so they only need to be directed towards each button, but not necessarily touching the inside of the case. Try removing the battery and hard resetting the watch by touching both the + and - poles at the same time with a metal tool. This procedure does not erase the dive log, but it can erase any electronic malfunctions. I show the procedure on this part of the video: ua-cam.com/video/axe7SOM8Fd8/v-deo.htmlsi=7CTnc2z54irb9W5v&t=213 If, even after reinserting the battery once again, the buttons no longer work, unfortunately the PCB must have a problem that can't be solved by a simple hard reset. Good luck and let me know what you find out.
Comunque ho cambiato la batteria del mio orologio mistral ma mi segna sempre 6 / 7 gradi in più puoi darmi un consiglio? Grazie infinite e volevo dirti che sei bravissimo
Ciao Domenico, grazie per il supporto. In questo caso, purtroppo, non c'è modo di calibrare il sensore di pressione, quando presenta una differenza di profondità importante, l'intero PCB deve essere sostituito. Mi dispiace per la brutta notizia. Cordiali saluti.
Hola! Como buena práctica, siempre es bueno sustituir la junta al abrir la placa trasera. No sustituirla es arriesgarse a que el reloj se inunde cuando esté bajo el agua...
My watch continues to beep and blink on and off. None of the buttons work any more. I’ve barely used it and it seems way too soon for a battery replacement and it’s been blinking like this for nearly 3 weeks. I was expecting better from Omer!
Hi Lahaina, unfortunately your watch has probably presented some electronic problem. If the battery that is installed still has an acceptable charge (between 3.3V to 3V), the electronic board has some kind of defect. This cannot be solved without replacing the entire computer with a new one, so if it is still under warranty, ask to have it replaced at any of OMER's partner stores. Good luck and let me know if you have been able to solve it. Best regards.
Ciao Domenico, grazie per il supporto. In questo caso, purtroppo, non c'è modo di calibrare il sensore di pressione, quando presenta una differenza di profondità importante, l'intero PCB deve essere sostituito. Mi dispiace per la brutta notizia. Cordiali saluti,
Mi reloj ha dejado de marcar la temperatura, le he cambiado la pila y lo he reseteado y sigue igual…. Sabría decirme que le pudo haber pasado o cómo puedo solucionarlo😢
Hola Jhoselin, lamentablemente, en este caso la única solución sería sustituir su PCB por otra, ya que el sensor de temperatura no se vende aparte de la PCB. Siento la mala noticia! Considera la posibilidad de suscribirte al canal, muy pronto publicaré un vídeo mostrando el procedimiento fácil para sustituir la PCB en los relojes de apnea OMER y Sporasub... Saludos! 🐟
Ciao, l'O-ring originale ha un diametro di 37 mm per 0,8 mm di spessore. Dovresti trovarlo in buoni centri di immersione che hanno un negozio di riparazioni. Considerate la possibilità di iscrivervi al canale, pubblicherò futuri video su questo orologio. Saluti. =)
Bonjour, mettez la vidéo en pause à la minute 3:40 et vous verrez exactement les deux points que vous devez toucher pour faire le "hard reset". Il s'agit de la languette métallique inférieure dorée et de la masse métallique ronde supérieure. Ne vous inquiétez pas, vous ne causerez aucun dommage au circuit imprimé de la montre.
Very detail and professional! Thank you!
Hello Mihail, thank you for the support! 👍🐠
ty very helpful ! :)
Hi there, thank you for your feedback! =)
I'm glad it was useful to you.
Best regards.
Very informative thank you. I changed my battery for a normal cr 2032 and the diving function does not work. I cannot find any cr2032H for sale. Any recommendations?
Hello, thank you for your message. To restore your dive function, please follow the repair procedure shown in this video I have:
ua-cam.com/video/FF7aL5Lc-bs/v-deo.html
Let me know if it works. As for the battery, don't worry - a good quality, regular CR2032 will work just fine in the watch.
Best regards.
@@life.underwater thank you very much. I scrapped the surface and hope it will help. Got cr2032H too :)
Que casualidad que estoy viendo este video 27 de diciembre del 2024
Sí, realmente! Feliz Año Nuevo! =)
Holaa, una pregunta, que tal va el reloj? Es que estoy pensando en comprarlo para pesca submarina, recomendable?
Hola Pedro, gracias por la pregunta. Efectivamente es un reloj muy bueno para su precio. Si tienes suerte encontrarás el recargable, el OMR-1, que es el mismo reloj pero con batería recargable. Tengo muchos comentarios positivos de todos los compañeros que los usan, tanto el normal como el recargable. Creo que te gustará. Un saludo!
Hi,
I replaced the battery and all buttons stopped working. Do you what could be the problem?
Do you know if the coper bended pins placed in front of it button should be in contact with the interior side of the watch? Because in mine, I noticed they are not touching.
Thank you in advance for your help.
Hello! No, the pins only work as magnetic receivers for each button press (the buttons are all magnetic), so they only need to be directed towards each button, but not necessarily touching the inside of the case.
Try removing the battery and hard resetting the watch by touching both the + and - poles at the same time with a metal tool. This procedure does not erase the dive log, but it can erase any electronic malfunctions.
I show the procedure on this part of the video: ua-cam.com/video/axe7SOM8Fd8/v-deo.htmlsi=7CTnc2z54irb9W5v&t=213
If, even after reinserting the battery once again, the buttons no longer work, unfortunately the PCB must have a problem that can't be solved by a simple hard reset.
Good luck and let me know what you find out.
Comunque ho cambiato la batteria del mio orologio mistral ma mi segna sempre 6 / 7 gradi in più puoi darmi un consiglio? Grazie infinite e volevo dirti che sei bravissimo
Ciao Domenico, grazie per il supporto. In questo caso, purtroppo, non c'è modo di calibrare il sensore di pressione, quando presenta una differenza di profondità importante, l'intero PCB deve essere sostituito. Mi dispiace per la brutta notizia. Cordiali saluti.
Tengo que cambiarle la batería al mío, es necesario cambiarle la junta por una nueva?
Hola! Como buena práctica, siempre es bueno sustituir la junta al abrir la placa trasera. No sustituirla es arriesgarse a que el reloj se inunde cuando esté bajo el agua...
@@life.underwater where can i get the gasket
My watch continues to beep and blink on and off. None of the buttons work any more. I’ve barely used it and it seems way too soon for a battery replacement and it’s been blinking like this for nearly 3 weeks. I was expecting better from Omer!
Hi Lahaina, unfortunately your watch has probably presented some electronic problem. If the battery that is installed still has an acceptable charge (between 3.3V to 3V), the electronic board has some kind of defect. This cannot be solved without replacing the entire computer with a new one, so if it is still under warranty, ask to have it replaced at any of OMER's partner stores. Good luck and let me know if you have been able to solve it. Best regards.
Scusa ma dopo cambiato la batteria si ripristinano anche o gradi centigradi perché a me mi segna 7 gradi in più
Ciao Domenico, grazie per il supporto. In questo caso, purtroppo, non c'è modo di calibrare il sensore di pressione, quando presenta una differenza di profondità importante, l'intero PCB deve essere sostituito. Mi dispiace per la brutta notizia. Cordiali saluti,
Mi reloj ha dejado de marcar la temperatura, le he cambiado la pila y lo he reseteado y sigue igual…. Sabría decirme que le pudo haber pasado o cómo puedo solucionarlo😢
Hola Jhoselin, lamentablemente, en este caso la única solución sería sustituir su PCB por otra, ya que el sensor de temperatura no se vende aparte de la PCB. Siento la mala noticia!
Considera la posibilidad de suscribirte al canal, muy pronto publicaré un vídeo mostrando el procedimiento fácil para sustituir la PCB en los relojes de apnea OMER y Sporasub... Saludos! 🐟
Che misura di o-ring serve?
Ciao, l'O-ring originale ha un diametro di 37 mm per 0,8 mm di spessore. Dovresti trovarlo in buoni centri di immersione che hanno un negozio di riparazioni.
Considerate la possibilità di iscrivervi al canale, pubblicherò futuri video su questo orologio. Saluti. =)
@@life.underwater 37 mm sans doutes pas 370 ... :)
Slt obligé de toucher le positif est le négatif on ne voit pas bien sur la video j ai peur de faire une betise
Bonjour, mettez la vidéo en pause à la minute 3:40 et vous verrez exactement les deux points que vous devez toucher pour faire le "hard reset". Il s'agit de la languette métallique inférieure dorée et de la masse métallique ronde supérieure. Ne vous inquiétez pas, vous ne causerez aucun dommage au circuit imprimé de la montre.