SOLAR STIRLING ENGINE

Поділитися
Вставка
  • Опубліковано 7 січ 2025

КОМЕНТАРІ • 85

  • @ericore67
    @ericore67 7 років тому +5

    bravo !
    tres beau travail !!!!
    (et merci pour les photos)

  • @ManualdoMotorStirling
    @ManualdoMotorStirling 8 років тому +11

    Congratulations, very creative and with a good performance for the little heat.
    Leandro Wagner.

    • @DreamingConcepts
      @DreamingConcepts 2 роки тому +1

      imagine it with large frensel lenses pointing at it
      would produce way more electricity than solar panels

    • @dylanm.3692
      @dylanm.3692 7 місяців тому

      @@DreamingConcepts What makes you think that, if I may ask?

    • @DreamingConcepts
      @DreamingConcepts 7 місяців тому

      @@dylanm.3692 because concentrated sunlight produces more heat

    • @dylanm.3692
      @dylanm.3692 7 місяців тому +1

      @@DreamingConcepts Yes, but the displacer here looks like it's about ¼ square meter. An equivalently sized solar panel would produce ~63 watts. That alone blows most Stirling engines out of the water, unfortunately. The lens wouldn't help the output per square meter.

    • @DreamingConcepts
      @DreamingConcepts 7 місяців тому

      @@dylanm.3692 but you can compare price of solar panel per square meter with the price of Fresnel lens per square meter.

  • @nikolaus9504
    @nikolaus9504 6 років тому +1

    Großartig! Zum Verrückt werden schön! Wenn jetzt noch das Schwungrad als Ventilator fungieren würde, wär die Sache perfekt!

  • @mheermance
    @mheermance 3 роки тому +3

    Nicely done and clever engineering.

  • @edvogel56
    @edvogel56 8 років тому +4

    Beautiful. It would make a wonderful fountain pump engine for a garden.

  • @rawandtalabani3525
    @rawandtalabani3525 8 років тому +8

    Very nice work my friend... if you could give more design details in English that would help many of us.......Thank you

  • @andrewsmithmilan1780
    @andrewsmithmilan1780 11 місяців тому +2

    Why isn't this being shared or sold? I'd love to have plans or a buy a kit to build this.

  • @AttilaBlade
    @AttilaBlade 8 років тому +3

    Good to see how it works! Congratulation!

  • @christopherpetrov2355
    @christopherpetrov2355 Рік тому +2

    So Helium is used ! I wondered how perfectly this machine works.

  • @arquitectronico
    @arquitectronico 8 років тому +4

    Interesting Stirling set up!

  • @johnjackson8561
    @johnjackson8561 2 роки тому

    Nice build I'll forgive the misspelling.

  • @MrTauron77
    @MrTauron77 6 років тому +4

    A forgó részre csak egy tucat neodinium mágnes, melléjük pedig tekercsek. Ezzel kész a tiszta energia.

  • @kevinjackson4464
    @kevinjackson4464 7 років тому +2

    You need to get that fan on the cold side of the box! Cooling the cold side will add power.

  • @carmelpule6954
    @carmelpule6954 6 років тому +4

    Excellent but that fan should have been directed towards the cold end of the displacement arrangement. Very elegant in every way.

    • @enkisonofanu2301
      @enkisonofanu2301 6 років тому +1

      If the fan is placed between the lower panel and the spinning wheel, the power output will increase. I like this idea.

  • @annasarahkramerfazendeiro8030
    @annasarahkramerfazendeiro8030 5 років тому +7

    Wow, well done, I really like it! Do you have construction plans for it?

    • @davidward3991
      @davidward3991 2 роки тому +1

      @@1islam1 Jesus said no one get to the father except by way of me. Jesus created all that was created and nothing was created that was not made by Jesus. Turn your thoughts on the one true God before it is too late. The Gehenna Fire will consume body and soul when judgement comes on the unbelievers.

    • @eone2345
      @eone2345 Рік тому

      @@davidward3991 mind sharing verse in Bible where Jesus said he created all that was created?

    • @davidward3991
      @davidward3991 Рік тому

      @@eone2345 Read it in the Gospel of John the 1st chapter.

    • @eone2345
      @eone2345 Рік тому

      @@davidward3991 I read. There's no mentioned there where Jesus said that. Mind giving specific verse number?

    • @reypolice5231
      @reypolice5231 Рік тому

      ​@@eone2345
      Yes it can be confusing. It is in there, as I read it and was confused myself as well. I don't remember the exact passage. However if you do a bible search of new testament, ( read letter text of lord jesus speaking) or word search Jesus created it should show up.
      I also saw YT videos that go over this point.
      Jesus also said that he speaks in parable on purpose to confuse non believers so that the do not learn the secrets of the bible.
      It requires an earnest study to learn what God did to turn over to his son lord jesus as inheritance mankind to rule and rain as inheritor, only mediator, lord, king, and final judge.
      Last book of the bible revelation explains what is coming. I feel it should be taught first, at it fulfills all that came before in proficiency.
      Hope this helps you in your bible study and learning the good news of spiritual salvation. 😊

  • @justtinkering6713
    @justtinkering6713 Рік тому

    Great job. I think the power piston has too much dead air space?

  • @subepayal869
    @subepayal869 7 років тому +2

    good job ...keep developing further

  • @erdinatasiagiannata6882
    @erdinatasiagiannata6882 Рік тому +1

    Convex black glass🙏🙏 energi hot sun,and energi snow ice👏👏👏👏

  • @justalabratmr.6858
    @justalabratmr.6858 8 років тому +2

    Very nice design!

  • @ricardolopezarambarri7373
    @ricardolopezarambarri7373 8 років тому +3

    great job... wich kind of stirling ltd engine did you use? do you have construction plans?

  • @marctorrades1760
    @marctorrades1760 2 роки тому +1

    Brilliant 👏

  • @vladimirvojinovic4026
    @vladimirvojinovic4026 3 роки тому +1

    Bravo !

  • @kevinjackson4464
    @kevinjackson4464 7 років тому +3

    Or maybe just some plastic blades mounted on your flywheel to cool the cold side. You could probably try it with just some playing cards and tape!

    • @ne1cup
      @ne1cup 6 років тому

      good suggestion, I like that idea..

  • @richardmelkus7844
    @richardmelkus7844 5 років тому

    Very cool project 👍 vielleicht Reibungsverluste reduzieren.

  • @andonrangelov8844
    @andonrangelov8844 7 років тому +3

    Jarykcz1, I like your engine very much so here is another question:
    I saw you have holes in the displacer do you use them to put regenerators inside them?
    Do you have a regenerator in this LTD Stirling engine?

  • @ecirbafyonualud
    @ecirbafyonualud 27 днів тому

    Check the book "Three LTD Stirling Engines you can build without a machine shop (Jim R. Larsen)"

  • @Lechoslowianin
    @Lechoslowianin 8 років тому +3

    Super

  • @start7047
    @start7047 3 роки тому

    Thank you!

  • @thomvogan3397
    @thomvogan3397 6 років тому +2

    Why not use a parabolic dish to focus the sun on the hot side of the cylinder ?

    • @reypolice5231
      @reypolice5231 Рік тому +1

      Because that would melt the styrofoam piston. This is know as a low temperature delta engine LTD or ltd.
      For what you ask the piston in the box could be made out of air Crete. Air Crete is very light ( it floats on water) made with soap bubbles in cement.

  • @A3Kr0n
    @A3Kr0n 7 років тому +2

    Thumbs up for the fan

  • @cikapera9701
    @cikapera9701 5 років тому

    Is this made for making eletecyty

  • @andonrangelov8844
    @andonrangelov8844 7 років тому +2

    Cool. What is the power output of the engine?

    • @Jarykcz1
      @Jarykcz1  7 років тому +5

      About 3 Wats .

    • @andonrangelov8844
      @andonrangelov8844 7 років тому +1

      Well 3watts is really good, I would expect something like 0.1 w up to 0.5 w but 3w is very good. Congratulations !!!

    • @edvogel56
      @edvogel56 7 років тому +2

      Go to the end of the video. He is using helium as the working gas. A big advantage of this design is there is only one moving seal.

    • @andonrangelov8844
      @andonrangelov8844 7 років тому +2

      Yes I saw it. I think this is the best LTD solar Stirling engine I have seen on the internet. I love it and I want to have one…

    • @Skoda130
      @Skoda130 7 років тому

      You could probably get more power out of it using a larger displacement cylinder.

  • @aikixtal2013
    @aikixtal2013 6 років тому +1

    Would you get better heat exchange through the collector plate if it were less reflective?

  • @marekp5673
    @marekp5673 5 років тому

    What power does it generate?

  • @sabzerro5929
    @sabzerro5929 5 років тому

    Так вот как ветер на планете получается.

  • @edwinyurigattorno
    @edwinyurigattorno 5 років тому +1

    Stirlig?

  • @dbingamon
    @dbingamon 3 роки тому

    Try a fresnel lense on it?

  • @ВиталийБеспалько-ч5к

    Добавьте зеркало, и будет сильное .

  • @pyaesone2315
    @pyaesone2315 2 роки тому

    Wow

  • @stephen1133
    @stephen1133 8 років тому +1

    Helium?

    • @n.m.9616
      @n.m.9616 8 років тому +1

      Efficiency of the engine depend on the capacity to transfert solar energy to gaz.
      heat transfert and conductibility depend on gaz and pressure. You can also find larger high pressured hydrogen solar stirling engine.

  • @albertharvey3477
    @albertharvey3477 5 місяців тому

    Albert Harvey Rotary Engines

  • @Goold-jj1nd
    @Goold-jj1nd 3 роки тому

    Мало мощная и мало оборотистая - Модель на что пригодная

    • @AutoNomades
      @AutoNomades 5 місяців тому

      Small water or air pump for water systems ?

  • @apangvanjava836
    @apangvanjava836 7 років тому

    good

  • @theq4602
    @theq4602 7 років тому

    Yep. I can totaly see why 164 Watts per square meter is such a good way to power the world. I mean dam a freaking spotlight does better than the SUN at powering that thing.

    • @ne1cup
      @ne1cup 6 років тому

      I have a 50 watt solar panel about the size of that box

    • @enkisonofanu2301
      @enkisonofanu2301 6 років тому +2

      There are neon lights that consume as little as 3 watts, i,e, this little thing can light up to 55 such lights and it's virtually maintenance free. A 5 by 5 meter panel will generate about 4kv, more power than you need to run your tv, refrigerator, fans and computers and if you do not use all the power you can store it in batteries. It's called alternative, does not pollute, but you are programmed to think diesel coal and nuclear generators are what powers the world.

    • @AutoNomades
      @AutoNomades 2 роки тому

      @@enkisonofanu2301 We maybe could hide nucleare's wastes under his carpet, as there is Still NO viable (cheap all cost included and non dangerous way..) existing solution to dispose them ; )

  • @jimmartin7899
    @jimmartin7899 8 років тому

    Use a heat plug used in diesel engines to heat the piston on your sterling engine. Use the solar panel to run the heat plug!

    • @michaelrivera131
      @michaelrivera131 7 років тому

      Jim Martin solar panels get hot, which decrease their efficiency. If a person could somehow use some sort of efficient way of transferring the heat to a sterling engine hooked up to a generator, then they increase the efficiency of solar panels.

    • @AutoNomades
      @AutoNomades 5 місяців тому

      Free energy is a scam

  • @bjl1000
    @bjl1000 3 роки тому

    To bad there is a very limited supply of helium in the world.

    • @AutoNomades
      @AutoNomades 2 роки тому

      Stop to talk bullshit, please, there is already too much CO² ! (Better to use helium Only for ad balloons ? ; )

  • @strongholds12
    @strongholds12 7 років тому

    nice prop. Seems useless

  • @lordhexon
    @lordhexon 2 роки тому

    How much energy is harnessed per Square Meter.. what is the efficiency ?
    The most efficient solar electro voltaic panels are producing how much 23%.
    I would rather much prefer to be able to recover a lost heat and turn it in to useable energy… any ideas ?

    • @AutoNomades
      @AutoNomades 5 місяців тому

      This system doesnt require silicium dioxyde or electricity, so for many uses it can pump air, water, produce cold with only sun's heat and mechanical movements, thats not bad sill for some uses !!

  • @apangvanjava836
    @apangvanjava836 7 років тому +1

    good