Understanding Suction Cavitation and How to Avoid It

Suction cavitation can wreak havoc on a pump, leading to potential ugly rental repair bills. Learn how suction cavitation occurs and what you can do to remedy it.
Let us help you with your pump rental needs. Contact Xylem Rental Solutions: www.xylem.com/en-us/products-...

[@kirandewoo5390]

Wow, learn a lot in very few minutes, due to the excellent explanation. Thank you SIR.

[@johnfreisen3501]

Very well detailed and explained. Great job

[@marktunstall4577]

Excellent explanation, this has resolved my problem. Thank you

[@jeancaban]

Wow! Excellent presentation, very detailed and easily understandable. Well done!

[@tarnished9581]

This is amazing, thank you

[@vtbhanukiran1231]

Beautifully and Brilliantly explained by Mr. Pete Snow.
Thank you very much for your effort.

[@carmelocarismajr2735]

Best explanation ive seen so far..thank you sir Pete😊

[@sakshisrivastav8177]

the video was very informative , thankyou
can you please post a video based on discharge cavitation??

[@ians2007]

Excellent presentation, one solution giving to overcome suction cavitation was to slow the pump down, this is correct but can only be done if engine driven or fitted with a variable frequency control if electric motor driven - in the case of a fixed speed driver, increasing the discharge head on the pump by throttling the discharge with a valve, or orifice plate will also reduce flow and overcome cavitation.
Of course reducing speed or restricting the discharge will effect the pump performance in terms of flowrate and delivery head, now if the duty flow and head cannot be changed because of application requirements - it could mean a new pump selection is required.

[@barancankarahan4107]

Many thanks, video is full of useful informations.

[@cercibabes9040]

Beautiful explanation

[@tugrulmuhammadsabir487]

Great piece of info. One of the best presentation on the subject

[@krispudyastuti1006]

excellent explanation

[@retnuhretsnom96emanymton18]

Thank you.

[@yokeleetan4034]

by reducing flow rate, you not only reduce friction but also npsh required from pump. you can also throttle pump on the outlet. for npsh calculation, you need to include vapour pressure of liquid.

[@LMGKB]

Excellent

[@mohamedhatem5728]

Good bless you
Perfect explanation

[@dieselboy7138]

Interesting, very helpful

[@TuyenNguyen-ey8wd]

So useful

[@FUNNYEDUCATION]

Soo useful sir👍

[@WizMoh777]

wow what an explanation

[@kirandewoo5390]

Is it possible to have some of your explanation/lecture on PDF please. Thanks again.

[@brettmoore3194]

Why not use the implosion discovery as a benefit. I would think a certain carbonyl ceramics could make synthetic diamonds