First Ride at the Stacker MX Track
Вставка
- Опубліковано 13 лип 2024
- Today's video brings us to western Wisconsin to ride the Stacker MX track near the town of Cornell. I had a ton of fun riding this area. The track was pretty beginner friendly with several table tops and smaller doubles. I didn't have the nerve to hit the biggest double but definitely regret not taking a shot at it. I hope to conquer it the next time I go! They plan to refresh the track for the 2022 season so if you're in the region I definitely recommend checking this place out!
My Website petehager.com/
Creator Channels
SQUARE1 Speed Channel / square1speedchannel
Brewer Offroad / breweroffroad
Doc Atrox / snakedoc52
2020 Yamaha YFZ450R
Custom Graphics by Spider Graphix www.spider-graphix.com/
Urmosi 720 SBC Clamps petehager.com/products/copy-o...
Precision Elite Steering Stabilizer petehager.com/products/precis...
Rossier R4 Full Exhaust System petehager.com/products/rossie...
Urmosi Factory Edition Throttle petehager.com/products/urmosi...
Houser Pro Bounce Nerf Bars petehager.com/products/houser...
DRW Belly Skid petehager.com/products/drw-fu...
DRW Sprocket Guard petehager.com/products/drw-re...
DRW Rotor Guard petehager.com/products/drw-ro...
DRW Swing Arm Plate petehager.com/products/drw-sw...
DRW Case Saver petehager.com/products/drw-ca...
DRW Chain Slide petehager.com/products/drw-ch...
Revalved Front Shocks by Rocket Ron www.rocketronracing.com/
Pro Taper Contour Bars www.rockymountainatvmc.com/pa...
ODI Lock On Grips www.rockymountainatvmc.com/pa...!
Fuel Customs Intake W/box
Fourwerx Custom Seat Cover
Fourwerx Carbon Bumper insert
Factory 43 MX Bumper
Vortex ECU
ITP GNCC tires
Timestamps
0:00-1:27 Intro
1:28-3:13 Pre-Ride Walk Arounds
3:14-7:05 Ride Start
7:05-7:30 1st Break
7:31-8:21 Filming Session
8:22-12:02 Riding More Laps
12:03-12:50 2nd Break
12:51-14:25 Last Lap
14:26-15:24 Brewer Goes Down
15:25-16:53 Checking Out TT Track
16:54-18:05 Filming Session
18:06-19:40 Outro
Music sourced through www.epidemicsound.com/
Intro Music "Humbot" by Wave Surfer
Middle Music "Skinfolk" (Smartface Remix) (Clean Version) by Xavy Rusan
Camera Gear-
GoPro Hero 7 amzn.to/2MHvxVl
**Must purchase GoPro adapter to run microphone amzn.to/2SjdM3O
Motovlog Mic Purple Panda DISCOUNT LINK www.purplepandastore.com/prod...
Links in the description are typically affiliate links. If you click on one and purchase, we’ll receive a small commission. This helps support our channel and allows us to continue making videos like this one! As always thank you very much for your support!
Follow Me On:
Instagram- / pete.hager
Facebook- / pete-hager-media-21519...
#savesportquads - Авто та транспорт
Your channel made me fall In love with the Yamaha YFZ’s and Raptor’s, now I’m saving for one. I love your vids!
So epic to hear man! Thanks for watching my videos 😬🤘
haha same here bro!! =)
I would love to ride this track! Looks like fun Pete; awesome opening sequence 🤘
Pete Hager, the whole reason I got back into riding. I'm nowhere near at your guy's level and I probably never will be at my age but it feels good to be back riding I've been away from it since the '80s
You and Brewer always pull off some great shots and captures, I can always count on quality videos from you and him. Be safe guys, glad JB and his quad are unharmed. Be safe my friends :)
It’s amazing how much bigger this track looks in person compared to video. Enjoy the vids man!
That opening drone sequence was a great idea. Shows the size of the track from a different perspective than the Go Pro can. As always your putting out straight fire !
Thanks man! Track videos definitely have a different creation strategy. I know I can’t chop the gopro footage up too much because the viewers want to learn the track.. at least that’s what I do when I watch track videos! I figured the drone footage would help provide perspective 😊👍
Some of your best cinematography yet! Well done.
Great video guys,fantastic to see you on a trac Pete keeps all the mx fans happy now it’s time for some woods racing you definitely got the skills buddy
Can't wait to ride here again!!! Wish it wasn't so far away but I will be back to ride the MidWest with you guys soon!!
Like the slow mo pics...great vid!!!💯🔥🤘🏼🤘🏼
Always love watching your videos man been watching sense the starting of 2020 keep on shredding and happy new years to you and my 350 raptor 💙🤞
Hey, i really like your videos! I´m from Argentina and i ride a Raptor 350!
Great vid as always!! One day I'll be on your level of riding and capturing video! Thanks for the great Content!!
Your YFZ450R looks & sounds awesome Pete! 👍💯
Exactly right I wish other manufacturers still made the 450s besides Yamaha if Honda made a 2022 450 I would buy it in a heartbeat but right now Yamaha is at the top in the sport quad world
Nah ltr 450 would steam roll the yfz450 on a track
Looking smooth out there! Track looks fun, you don't realize how long of a track that is until you see those drone shots. Pretty cool!
It was definitely a long track. I could only do about 2.5-3 laps before taking a break 😅 I was kickin myself for not taking on the big jump. Hopefully next time! 😬🤘
Love your videos
Man that place looks fun ‼️
You always find the best music to fit with your videos
Thanks man! Music is tough to decide on so it’s nice to hear that! 😊👍
Dude i felt like im in there watching this, badass video shots.
Making my week. Been wanting to see the 450 on an mx track since the day you brought it home
Did not disappoint
Awesome video, loved it !!🔥 I wanna start doing track with my yfz 450r aswell but big jumps are scaring me 😅
Michael and Pete dropped, it’s a very good day
You are getting very good on the track😁
Hell yeah pete
That shot with the #Savesportquads is SICK !
Track looks fun as hell. One of these meet ups next yr, I'm going to have to try and make it.
Nice bro!
If you ever come to the Oregon Coast Dunes between Coos Bay and Florence, Oregon I would love to fpv chase film with you! Also would love to go ride with you too!!! Effin love your channel, best quad channel on the tubes
Love the vids wish I could ride one of your quads.
Awesome video Pete🤘 #savesportquads
Awesome video Pete that track looks like a blast definitely gonna have to go there next year
It’s worth the trip! Our track options for quads are getting more and more limited. It’d be great to connect for a ride sometime. I hope all is well! 👍😊
@@PeteHager that’s the truth I was pretty bummed when hurricane closed and we’re doing good here hope the same for you as well and most definitely need to link up for a ride and have you rip the 540 ktm
@@devinhoepner2107 sounds good man! I definitely have St Anthony on my hit list too! It’d be great to feature the KTM’s so we will have to connect once the snow melts 😬
@@PeteHager sounds great we also have Oklahoma trip planned in March and I am hoping to get out on the ice a couple times this winter. I’ll keep in touch with you on when we’re planing our Idaho trip as well.
Watching this video, I may just have to pull the raptor out for some fun in the snow. :) #savesportquads
I love your vids
In only 11 years old
I live in Lesotho
I read a KTM 85
Awesome riding! I'd like to see a video of you trying out a 450 bike possibly
9:19 that limiter tap tho
*_Mega!_*
Sei bravissimo ciao dalla sicilia
sorry if I am late #savesportquads love the quads and the vids
Thanks for your constant support man! 🤘
Hwoeeeee yeah nice video 🤟🤟how many oli chance do you on your yfz?
I hope to make it out to one of your subscriber meet ups at little Sahara I ride a 2019 yfz 450r se
I really wanted to see a POV shot of that big jump... still an awesome video though 👍
I can get you guys one if it’s highly requested
There should be some POV footage of the bigger jump in other videos if you search the track. I was so tempted to hit it but 4th gear tapped coming out of that corner was buggin me out 😅 hopefully next time! 😬🤞
I know a motocross track in Chillicothe il kinda big u should go out there same time there's bigger jumps and it's nice track my old boss built it around his house
only reason why yamaha still makes sport atv's.. because they are the best
Do you plan to do a ride here in the '23 season, I just learned of this place and want to plan a few trips here come summer. Previously I only have rode wheeler MX, it's run but super sandy. I'm up in Duluth MN, I appreciate you getting this place out there!
man glad brewer is ok
I was definitely a bit worried at first. He’s a tough dude! 💪😅
Good video. What is your favorite quad?
Man u need a set of MX tires. 20's front and 18's rear with beadlocks. That's a gane changer
I have a set of mx tires but I haven’t gotten 8inch rear beadlocks for the 18’s yet! I’m excited to try them next season! 😊👍
@@PeteHager nice dude! I'm Also starting on this ATV MX thing and hell yeah i like it. I raced some XC this past season but I'm going mx next season. Just got to try 18s on DWTs and damn i Loved em
@@diegomeneses1947 I know they will make a huge difference sliding and in the corners. Plus the acceleration should improve. I’ll definitely be sure to have them ready for my next track riding experience! 👍
I seen this on brewer off-road channel
Yes he and Ian with the Square1 channel have uploaded content from this day if you want to see more! 😊👍
Which quad do you like better the yfz 450 or the raptor 700 ?
How did the rocket Ron revalved shocks do on the mx track?
Peter where do you have your GoPro mounted?
Wow hey Pete im so early it would mean so much if you replied
Stay safe out there!
Thanks for being an early viewer and supporting my channel! You stay safe too! 😊👍
Wow thanks so much for replying
I might’ve already asked this but does your shocks revalved and resprung feel like aftermarket shocks
Got a question for you. I just bought a new se raptor 700r. I've been breaking it in an noticed when feather the clutch a bit to take off it minor hiccup but if I let out very slow and barley give gas it's fine. Once I'm riding I have no issues. I am only using 1/4 to 1/3 throttle for the first 10 hours. Has the expected power for the 1/4 throttle. I'm just wondering if it's normal while everything is seated in? Also I have not rev out machine or went in high rpms. What's your thoughts or anyone else. Thanks
Pete if you had to sell one of your quad witch one will you keep? 700r or yfz?
I wish I had a yfz 450 😐😂
dirtbike only every other saturday . like bikes dont have enough tracks for them only . this is just the start of this track not letting quads ride . been there done that seen way too many tracks do the same . if the bike riders cant ride on a track with quads , maybe they should be on the pee wee track
It’s definitely a never ending debate between the quads and the bikes. I do think for safety purposes it can be good to keep us separate depending on abilities out on the track. They like ruts and we blow them out. Unfortunately the bikers need to be catered to because there’s so many more bike riders than quad riders.. they help keep the tracks in business but slowly we’re losing tracks to ride quads. This track in particular is managed by quad riders thankfully and will continue to allow quads into the foreseeable future👍
@@PeteHager thats awesome that this place is owned by quad riders . keep up the good work Pete youre going great
Hey Pete , having a hard time deciding on which quad to get. I do mostly trail riding and don’t know if I should get the raptor 700 or the yfz450. Do you have any input ?
Hey Avery, it can be tough to choose between the 2 machines. The Raptor is definitely at home in the trails. It’s perfect for more casual riding and has tons of torque which makes climbs and drag racing quite a bit of fun! It’s also nice to have that power in the sand. The main draw back to the Raptor would be its handling. It can be a little top heavy depending on how hard you’re riding it. It has limits on a handling and suspension level that the YFZ does not. The YFZ handles on rails and is very easy to ride. It’s also a bit stiffer which is nice for performance but it’s not the most comfortable if your gonna be on it all day. The YFZ is a very on/off machine and doesn’t like to be lugged around like the Raptor can be. The nice thing about the YFZ is nothing is really off limits. You can pound whoops and jumps all day and the machine seems to handle everything with ease. Reliability wise the Raptor is a bit lower maintenance and most people expect to get quite a few more hours out of a Raptor motor than a YFZ motor. If I’m deciding between the quads it really depends on the environment and my mood almost. If I’m exploring a new area or feeling more chill then the Raptor is perfect for the job since it’s so comfortable and has the power for any situation. If I know I’m gonna be in a more track like environment with jumps and berms then I tend to want the YFZ since it’s safer and more predictable when riding more aggressively. Essentially one is a muscle and one is a sports car. If you have any specific questions don’t hesitate to ask! 😊👍
@@PeteHager wow thanks for the response. Really puts things into perspective. I enjoy the videos and hope to one day shred a few trails with you!
pete is it necesarry to make ur handle bar more elevated when u r riding on a MX track ?
Not it’s not necessary but you do stand quite a bit when your track riding so if you feel hunched over or uncomfortable then you may want to look into taller bars, bar risers, or a taller steering stem depending on how you want to set yourself up 😊👍
Here early
Hey i had a question? Do you have race suspension? If so what brand cause i wanna get it for my kfx
My rear shock is stock but my front shocks are OEM revalves by Rocket Ron. I think he did a great job setting up the front. I hope to have him do the rear. Having a shock builder set up your OEM shocks can be quite effective and it’s cheaper then going full aftermarket. I don’t race so it’s a great option for myself. If your looking to compete and really push the limits then getting aftermarket shocks is probably the best choice. I know Ron set up Michael Sabo’s shocks on his KFX450 and they turned out great! Basically you can just call Ron, tell him your set up/needs, and he’ll come up with a strategy that’s best for you. He’s been in the industry since before quads existed so he knows his stuff! Hope this helps! 🤘
Pete question you probably always get if you could only own one bike which would it be out of your 3?
It really depends on what type of riding I’m doing. I spent a year deciding between the YFZ and the Raptor. I knew I wanted a “mainstream” brand like Honda or Yamaha because aftermarket parts availability is more plentiful and customizing your machine is half the fun! After fully experiencing those models I still would lean towards the Raptor as my primary machine. It’s an excellent do it all quad for the types of riding I do. It’s super fun for exploratory riding since it has so much torque and it has very comfortable ergonomics. I’d say it’s only drawback would be track riding since it’s rather top heavy and it can be kinda scary to jump at times. The torquey power plant always makes me smile though and they’re very reliable machines which is super nice. I always say the Raptor is a muscle car and the YFZ is a sports car. They both are fun but if there was only one in the garage I’d have to go with the Raptor which is why I got that machine first. The 400ex is an excellent machine in its class and I always have fun riding it around. It’s a bit too slow for me at times but for its size and purpose it’s hard to beat. Plus it has that legendary Honda reliability 😅👌
@@PeteHager Real nice!!! Thats a epic way to put it man 😂 Im happy with my Muscle car the Raptor 700r also have a sports car the 450trx. Another one could be a Harley Davidson and A Street Sports Bike. Wish you would get into Trucks man and get a Chevy 2500 Duramax to haul your babies around cross country. And while you at it review it and upgrade it too. Not trying to show off just material stuff. I just traded my 2014 chevy duramax for a 2021 duramax the best.
It sucks living in Australia
It’s such a anti quad country
There are next to no places to ride in nsw
I wish we had places like this to ride
What tire pressure do you recommend for such place?
I tend to run 4-6 PSI depending on the terrain. For tracks I probably run at least 5-6 to prevent bottoming a rim if I overshoot a jump or land crooked 👍
Aye bro needed help finding a good exhaust not sure which to get from rossier, monster or empire want the one with the most power and thanks if you respond.
Hey man, what kind of quad are you buying for? If it’s for the YFZR the Rossier R5 is supposed to be the top performing exhaust. I’m getting R5’s installed on my Raptor and YFZR in 2 weeks and will have dyno videos showing the difference in performance afterwards 😊 we sell the R4 and R5 on our website 👍
@@PeteHager oh ok thanks would help a lot
@@PeteHager buying it for yfz 450r
@@yahirbarragan6630 if your buying for the YFZR I’d recommend the R5 over the R4, especially if you’re going to be track riding. The muffler hangers on the R5 are billet and it’s designed for more intense riding conditions. Plus it’s supposed to be a little quieter but they still sound great 👍
@@PeteHager thanks
Did you guys go back this year?
I haven’t made it back yet this season. Hopefully I can make it over next year for a ride!
What’s the nerf bars you have on your raptor 700???
They’re pro armor nerfs that I special ordered through ATVgalaxy but that was in the fall of 2018. I’m not sure if they’re still available. They used to have a website but now I think they’re exclusively on Ebay. At that time they were the only distributor that had access to small batch pro armor ATV parts that I know of. Hopefully you can source a set! Otherwise I’ve seen raptors with Alba, Rath, factory43, XFR, GYTR, and lone star racing nerfs. There’s definitely options out there. I would lean towards Rath or Factory43 since they have monster pegs 👍
@@PeteHager Those nerfs bars look good. I like the solid heel guards on them. Iv been looking for a set for my 06 Trx450r but all I can ever find are heel guards with nets. I’d like to find some good solid black ones. Iv got AC nerfs on it that I painted black but have never had heel guards.
Have you ever riddin at AOAA in Pennsylvania?
I haven’t been to PA to ride but I’ve heard lots of good things! Seems to be a strong offroad community there!
@@PeteHager maybe someday.
Hey Pete we go to Little Sahara State Park pretty often do you want to come ride with us that be Cool just let us know and we’ll bring out our rzrs
I’m sure we’ll be down next fall for the 250r meet up again! That’s becoming a pretty awesome sport quad weekend! 😁🤘
@@PeteHager hey I’ve been looking for a new quad for a couple of months do you have any suggestions for a sport quad for 3 grand or less?
How old is the footage?
It’s from July. I had a couple rides that got backed up so I was finally able to put them together 👍
What do you think about a raptor 350 is it a good quad
I think they’re good machines! I definitely recommend staying within the Yamaha or Honda family just because aftermarket parts availability is better. I’d say the best thing to do is to test ride any machines your interested in if possible. Other good options are the 400ex or KFX400/Z400. The 400ex probably has the most aftermarket options between the bunch 👍
@@PeteHager don’t have a huge budget so 350 is about as big as I can afford but ok and have you heard of a pentora 250 you should do a review on one it’s like a really cheap Yamaha raptor
Other than that keep up the awesome vids very inspirational
@@austinraber9403 I haven’t heard of them! I tend to try to ride different machines whenever I get the chance so maybe someday! If this 350 will be your first machine you can always upgrade down the road. I’d say if you find the right machine for the right price to jump on it 🤘
Where is this?
Just outside of Cornell Wisconsin 👍
whats up with no Gloves man