when sizing your chain first push the rear tire all the way forward then install your master then slide the tire back to the proper tension. you started in the middle which will likely result in a link removal later to compensate for any stretch and wear
Masterlink clip was installed backwards. You want the closed end facing direction of chain travel. If it gets snagged on anything as it is it could pop the clip off.
QS165 motor shaft has a right hand thread for the nut which means that you have to put motor sprocket to the left side for the nut not to be unscrewed when motor turns. And of course the wheel large sprocket must be on the left side too. The original motor for Razor Super moto ( kunraj MY1020 ) has left hand thread. Probably that's why you just put QS165 there replacing the old motor, But make sure the nut not be unscrewed during ride.
which platform should i use for my first razor build? i want to build a super moto style like yours is it the mx500 you would recommend? sx?? love ur content brother
Thank you for watching man! 🤜🤛 if you’re buying used I’d just get whatever is available in your area. If you’re buying new… I like the SX since the seat is more comfortable and the battery areas is bigger
Have you checked out Mini Ron and his 100+ Mph razor? If not check him out.. You might find a few ideas to implement if you are trying to make your razor a Top Speed Bike... 😉 BTW.. Great video.. Very Clean and a well put together video!
Wanna build your own mini moto? Visit voltronwatts.com to get started! 🤜🤛
The wire from QS was probably tinned copper, it has better corrosion properties after being tinned from wet or dirty environments.
You might be right 👍
He is, I confirm@@VoltronWatts
when sizing your chain first push the rear tire all the way forward then install your master then slide the tire back to the proper tension. you started in the middle which will likely result in a link removal later to compensate for any stretch and wear
Right on! Thanks Thomas. I mentioned that in text when I was addressing chain sizing. 👊
Sick can’t wait to see the other build videos 🤟
Hopefully have it running this week! 💜🩵
@@VoltronWatts 🔥 it’s such a clean build congrats
Thanks man! 🍻
Can't wait for part 2 !
Thanks for watching! 🍻👍
Masterlink clip was installed backwards. You want the closed end facing direction of chain travel. If it gets snagged on anything as it is it could pop the clip off.
Good looking out!
looks so good bro
Thanks man!
QS165 motor shaft has a right hand thread for the nut which means that you have to put motor sprocket to the left side for the nut not to be unscrewed when motor turns. And of course the wheel large sprocket must be on the left side too. The original motor for Razor Super moto ( kunraj MY1020 ) has left hand thread. Probably that's why you just put QS165 there replacing the old motor, But make sure the nut not be unscrewed during ride.
I’ll keep an eye out! 👍🫡
ur amazing only video in depth about stretching phase wire thanks your such a help
Anytime man! 🍻
What guage wire is recommended for upgrading the phase wires?
I presume it partially depends on current going through them...
4 🫡
Where did you the the tires from?? Look sick! Would like to get a set. Love the channel kept them coming.
Thanks for watching! They are PMT 10” tires 👌
great
Thank you for watching!
Holy battery
She a bigg’n!
How are you liking the royce ramirez swingarm? Have you hit any jumps with it and if so did it hold up fine. Thanks
Hey! I havnt hit any jumps with it, I have it on my street bike. But, I have no doubt it would do just fine in the dirt. 👌
which platform should i use for my first razor build? i want to build a super moto style like yours is it the mx500 you would recommend? sx?? love ur content brother
Thank you for watching man! 🤜🤛 if you’re buying used I’d just get whatever is available in your area. If you’re buying new… I like the SX since the seat is more comfortable and the battery areas is bigger
@@VoltronWatts I trust your advice, thanks for the response!
What color paint is the frame?
It’s a purple from tropical glitz 👊
Where did u get the tires from? The bike?
Tires are from PMT
Swing arm?
Custom made from Royce Rameriez out of HoustonTexas
what is the max power and rpm we can get out of this motor
I’m not sure what the MAX is. I’m gunna test it tho. 🤜🤛
@@VoltronWatts in the vesc app you tested in video it showed 11k rpm
Where did you get the wire cover
I forgot to add that!
amzn.to/3tK6fiY
Thx
@Babyjok3r77 Np
Have you checked out Mini Ron and his 100+ Mph razor? If not check him out.. You might find a few ideas to implement if you are trying to make your razor a Top Speed Bike... 😉
BTW.. Great video.. Very Clean and a well put together video!
Yup. I know Blake personally. He’s got some fast stuff! And thanks for watching!