As far as you can see, a good job has been done. The question I have is: does the car in question still have the original clutch? Because if it were with 205 hp it would be insufficient.
Hdi tuning also have some information on it. I have the post 2010 8v version too, that I'm thinking of playing with. The 115hp (bigger) turbo still fits but requires a more complicated ECU re-write and a front mounted intercooler if you want to up the boost.
All good. Atm at 400 nm. Only thing is to get a bespoke kit for the gearbox. Pressure plate is very important as some of them are angeled and does not make 100% contact with the disk.
Holy fucking shit. I bet some hot hatches on the highway will be like wtf is this tractor gaining on me haha. I have the 95hp version sadly so not much more than 170/180hp I could get out of it 😭😭
Fara schimbarea esapamentului nu se poate face nimic la 1.6tdci? Vreau si mai multa putere, dar in acelasi timp nu-mi place sunetul de toba sparta cu o "toba sport" pe diesel. Mersi! :D
Poti sa faci si o toba sport care sa nu sune tare. Daca i pui intermediară si finala nu o sa sune niciodată ca alea de le vezi tu pe yt. Diesel ul ca sa sune tare trb sa fie teava inox cap coada😂😅
MOB Tuning Ploiesti any ideas on gains from a stage 1 dpf egr delete? Also what would I need for a stage 2 map? I’d like 150bhp or more but it’s not had a clutch yet so I gather it will need one after
@@thunderdome6614 thanks for the answer. Its a straight fit? You take the old injectors and put those? I have a Volvo V40 1.6 Peugeot engine 115hp with Siemens injectors. are those compatible? Or did you have to do something?
@@onecustoms3937 did you use a paddle clutch on this? What was the final torque figure too? I have a Mk6 which I'm looking at doing the same too but with the gtd1244vz, custom paddle and stock pressure plate
@@onecustoms3937 hahaha come on dude, don't tell me bullshits PS: you probably spend half money buying a 1.6 Ecoboost fiesta that goes faster and the engine doesn't blow off after 10k km
bad news for you, your car is the 1.6 8v you need the 1.6 16v which stopped production in 2010 and the final cars rolled out in 2011, thank euro 5 for that one mate
Nice Work haha. This little thing is a grown up now 👍🏽
stock 0-100kph 12s
after 0-100kph 7s
how much money have you spent?
can someone answer here, i am planning to build 2010 fiesta just like this one but i dont know how much money i need to spend
@@lukasmojic9565 about 3k $
@@lukasmojic9565 about 1-2 k$
Crazy 💯 400nm in a fiesta holy shit🫶🏼
Very impressive! Nicely done
I have fiesta mk8 diesel stage 1 150 hp!! Your diesel is amazing!!!
Surprised the gearbox can handle that power level
What clutch? :D
As far as you can see, a good job has been done. The question I have is: does the car in question still have the original clutch? Because if it were with 205 hp it would be insufficient.
Very impressive
Amazing! Is that power to the wheels? 120% power increase 😂
Engine power
Nice one mate. I know this is the 90hp engine, but can you map it for the 95?
I’ve been trying to find a tuner who can but so far I’ve had no luck.
TDI tuning in chelmsford
Hdi tuning also have some information on it. I have the post 2010 8v version too, that I'm thinking of playing with. The 115hp (bigger) turbo still fits but requires a more complicated ECU re-write and a front mounted intercooler if you want to up the boost.
Can you tell us in a list what did you change an how much does it cost?very good job
Hi, what's best turbo to run on the T3DB engine on a focus. I'm currently on 132hp and 340nm tune. With just egr delete.
Pretty fast bro🔥
class car man. where did you buy the intake at
Gearbox still alive? With that much torque
What happened to the mpg after upgrading the turbo and injectors? More or less?
Under normal use still basically the same as before.
la ce pret se ridica toata operatia? se poate efectua si pe alte derivatii ale TDCI-ului (focus 109 cp) ?
Intrati pe pagina noastra de FB din descriere si lasati mesaj pentru detalii. Multumim
what MAP sensor did you use, currently got all the parts required to do this to my mk6 fiesta but finding it hard to find a 3.1 bar map sensor, cheers
3.1 Bar MAP sensor Part No. 9649396580
Hi how did you get this to run mafless?
which turbo did you use?
Hello, I have a ford fiesta 1.6 tdci 95BHP 8v, I wanted to know if the same is possible? And how much does that cost ? Thank you
Nice work! Have only just come across vid, have C30 D2, very cheap to run and looking to remap! (Must keep D2 badge on back!)
How much money have you spent until now?
Hello can you tell me how much tourqe can handle focus 1.6tdci 66kw. 2007. Is it same transmison?
hello, which turbo actuator are you using? Thank you
What gearbox?..200 km/h at only 4000 rpm
Stock gearbox
@@onecustoms3937 is it the econetic version?..because on normal models 200 km/h is reached km/h at about 4700 rpm.
Standard 1.6 TDCI 90HP euro 4
@@onecustoms3937 yes, econetic is just the longer gearing version 😉
Jesus christ man!
Now THIS is what i want for my 1.5tdci 95hp fiesta mk6
Do you think it’s possible?
haha it flies!
how's the gearbox?
All good. Atm at 400 nm. Only thing is to get a bespoke kit for the gearbox. Pressure plate is very important as some of them are angeled and does not make 100% contact with the disk.
Holy fucking shit. I bet some hot hatches on the highway will be like wtf is this tractor gaining on me haha. I have the 95hp version sadly so not much more than 170/180hp I could get out of it 😭😭
How much dis this affect MPG?
Which turbo do you install? And how many liters intercooler?
Bmw tf035 turbo, pwm controllable. There are certain actuator codes that you can use to enable ecu control.
@@thunderdome6614 awesome,thank u man
How transmision deal with that torque
Stock EDC16 ECU
??????????????????????
What about internals? How much they can hold?
We will see.....
How much did this build cost
What mk is this I have a standard 95 bhp zetec s 14 plate 1.6 diesel I'm looking to play with
mk7
Please show me your intercooler
Can I make the same on the 2013 1.6 TDCi 95 ? They have EDC17 ECU
sadly not, your engine is different
how bad it is for the engine
Depends on how you drive it. My 1.6 tdci has got 170bhp and 180.000km and everything is fine
party boy what mods did u do for stage 2?
then theres me in a 1.4 micra 88hp from factory HAHAHAHA
Fara schimbarea esapamentului nu se poate face nimic la 1.6tdci? Vreau si mai multa putere, dar in acelasi timp nu-mi place sunetul de toba sparta cu o "toba sport" pe diesel. Mersi! :D
Poti sa faci si o toba sport care sa nu sune tare. Daca i pui intermediară si finala nu o sa sune niciodată ca alea de le vezi tu pe yt. Diesel ul ca sa sune tare trb sa fie teava inox cap coada😂😅
What’s the spec
oil catch can ?
Front mount ?
And what timing belt ?
Damn haha...mine is still stage 1 tuned.
If I have fiesta 1.6 tdci 95bhp after stage 1 how many do I get?
David 120
@@david14exe I did get 120hp and 300nm.
Where do you find the injectors?
0445 110 297. Highest flowing injectors for this engine.
This car had at least 170hp
What's upp with gear change?
what do you mean?
I have a Volvo v70 1.6d can you give it a map?
Sure
MOB Tuning Ploiesti any ideas on gains from a stage 1 dpf egr delete? Also what would I need for a stage 2 map? I’d like 150bhp or more but it’s not had a clutch yet so I gather it will need one after
I have gone 195 km/h with mine stock.. 1.6 fiesta diesel.. 90 HP.. Not so fast accelerațion but
You need more gas ⛽️ bro
What injectors do you have?
Bosch 0445 110 297 and preparing to add BMW 335D nozzles
@@thunderdome6614 thanks for the answer.
Its a straight fit? You take the old injectors and put those?
I have a Volvo V40 1.6 Peugeot engine 115hp with Siemens injectors. are those compatible? Or did you have to do something?
@@ferraphs You will need Bosch injectors, not Siemens!
@@thunderdome6614 but the Bosch injectors fit my engine? Or you did something else?
Stock clutch holding up ?
Stock pressure plate + kevlar custom made disc
Nicely done mapping
@@onecustoms3937 did you use a paddle clutch on this? What was the final torque figure too? I have a Mk6 which I'm looking at doing the same too but with the gtd1244vz, custom paddle and stock pressure plate
My dad has a mk7 1.6 zetec s 138 hp
Is this diesel ?
Yes it is 😅
Hi, what's the time on 1/4?
Video uploaded in February, now, November the engine probably blow off
Engine is ok. Preparing parts for 300hp.
Don't be so hater.
@@onecustoms3937 Se poate un pret aproximativ pt toate modificarile? Multumesc.
@@onecustoms3937 hahaha come on dude, don't tell me bullshits
PS: you probably spend half money buying a 1.6 Ecoboost fiesta that goes faster and the engine doesn't blow off after 10k km
@@unatizia_tarocca ecoboost is less reliable engine...and more expensive
Hahahaha you don't understand a fuck. This engine stock at 0.2bar. if you boost just at 1.0 bar it will explode
need help with my car want to do that in my fiesta 2014 year 1,6 tdi ;)
bad news for you, your car is the 1.6 8v you need the 1.6 16v which stopped production in 2010 and the final cars rolled out in 2011, thank euro 5 for that one mate
Buy a fiesta st
@@rcxmodelsuk256 will my 2009 zetec s 1.6tdci be a 16v then?
@@samt6021 yeah your cars perfect for a turbo upgrade
@@rcxmodelsuk256 yesss. I'll never actually do it but it's nice to know I can 🤣
omg xD
Only £20 a year to tax. =D
Lol i got a 1.4 tdci firsta 2008 with stage 1 remap and an induction kit and hits 120 bhp🤣
Oh god!
I'm planning to do the same thing.. what have you done exactly ?
" 3.1 bar, F10 turbo" hwhahahahah the bullshit festival. "Mycousin tuning"
What's bothering you? You don't think it's real? Or are you just jealous
20.000 km and bye bye engine.
Actually it's making way over 20.000km and everything pefect. We're aiming for 250hp+ mods.
@@onecustoms3937 Really? What millage do you have now?
How much bhp is this stage 2 ?
Can I do that stage 2 in Clio 4 dci 75?
naah bro, get a better car bro
Yanso do it