Every time there is a power outage or another glitch the stream automatically ends and when I restart I get a new UA-cam url. Any idea how to keep the steam going forever?
Unfortunately, that's a connection issue with UA-cam. If there's a disconnect of information flow to the server, it likely closes down the livestream to save costs for UA-cam. There may be options on the UA-cam side of things within the settings but perhaps another service like twitch would be able to get around the disconnection problems.
I'm not entirely sure on that one. I'd assume it would be similar if not the same for those applications. Unfortunately, I had to Google what those were when I read this comment, so my knowledge on that software is basically zero.
Thank you for the video. Great and super useful information, straight to the point 🙌 I was looking for a camera to live stream to UA-cam from a wifi connection and solar powered so that it's completely stand alone. Does such a camera exist already? Thank you in advance 🙏
We have a wireless bridge that can go 1.8 miles wirelessly from bridge to bridge. The trick is that it has to have line of sight with both devices so it gets complicated if you don't have a tall structure to attach to. If you could purchase a 3rd party solar power unit (we don't sell those unfortunately) that had 2 standard outlets and could output enough power for the bridge and camera to run simultaneously 24/7, you could concievably achieve this. Here is a link to the bridge to check that out, there's a video that goes with it too. Link: montavue.com/products/mawb-03p-3km-1-86-mile-poe-in-out-wireless-bridge-867-mbps-2-4ghz-5ghz?_pos=2&_sid=0e68e2131&_ss=r
my PTZ camera IP2M-853E does not have that access platform link in its menu, all of my other amcrest cameras do. therefore I cannot paste the URL and key. ho do i get this camera on UA-cam?
If your Amcrest camera does not have the ability, then you should consider purchasing a Montavue camera. All Montavue cameras are programmed to be compatible with mulitple types of NVRs as well as the ability to livestream to a server. The Amcrest tech support website would probably be a better place for this question in the meantime.
If it's on a PoE switch you should be able to stream it no matter what. This enables you to have the camera on your network, add it to your NVR, and Livestream it to UA-cam simultaneously.
If you're using 3rd party cameras they probably won't work on our app. This tutorial is geared towards Montavue cameras so this walkthrough setup might not work on all cameras.
A network switch which also can provide power through ethernet cable (CAT6) so other end's device can be run only through cat6 LAN cable and won't be needed dedicated power supply
I love this channel! Thanks for the help!
We appreciate the support! Thanks for checking out the video!
This was perfect. Just what I needed. Thanks!
❤ simplicity is an ultimate sophistication mean… Thanks so much. It worked.
Thanks for this! Definitely looking to try this in the future!
Very helpful video - thank you
thanks for this 🙏
Every time there is a power outage or another glitch the stream automatically ends and when I restart I get a new UA-cam url. Any idea how to keep the steam going forever?
Unfortunately, that's a connection issue with UA-cam. If there's a disconnect of information flow to the server, it likely closes down the livestream to save costs for UA-cam.
There may be options on the UA-cam side of things within the settings but perhaps another service like twitch would be able to get around the disconnection problems.
Usually when this happens, you get a new IP
@@SirenaSpades I’m lucky in that regard, only 1 new IP in three years.
thank you
Great video bro throw some chapters in there
done
what settings would i have to change to connect it to the OBS or Stream Labs ?
I'm not entirely sure on that one. I'd assume it would be similar if not the same for those applications. Unfortunately, I had to Google what those were when I read this comment, so my knowledge on that software is basically zero.
Thank you for the video. Great and super useful information, straight to the point 🙌
I was looking for a camera to live stream to UA-cam from a wifi connection and solar powered so that it's completely stand alone.
Does such a camera exist already?
Thank you in advance 🙏
We have a wireless bridge that can go 1.8 miles wirelessly from bridge to bridge. The trick is that it has to have line of sight with both devices so it gets complicated if you don't have a tall structure to attach to. If you could purchase a 3rd party solar power unit (we don't sell those unfortunately) that had 2 standard outlets and could output enough power for the bridge and camera to run simultaneously 24/7, you could concievably achieve this. Here is a link to the bridge to check that out, there's a video that goes with it too. Link: montavue.com/products/mawb-03p-3km-1-86-mile-poe-in-out-wireless-bridge-867-mbps-2-4ghz-5ghz?_pos=2&_sid=0e68e2131&_ss=r
if a channel is not established does the 24 hour apply to every stream for just the first
No, the 24 hour wait only applies to your first stream.
my PTZ camera IP2M-853E does not have that access platform link in its menu, all of my other amcrest cameras do. therefore I cannot paste the URL and key. ho do i get this camera on UA-cam?
If your Amcrest camera does not have the ability, then you should consider purchasing a Montavue camera. All Montavue cameras are programmed to be compatible with mulitple types of NVRs as well as the ability to livestream to a server. The Amcrest tech support website would probably be a better place for this question in the meantime.
What if it's connected to the nvr through the network (ip adress) would that still make it unable to be streamed?
If it's on a PoE switch you should be able to stream it no matter what. This enables you to have the camera on your network, add it to your NVR, and Livestream it to UA-cam simultaneously.
Should my camera be from the same brand or any camera would work with Montvue app?
If you're using 3rd party cameras they probably won't work on our app. This tutorial is geared towards Montavue cameras so this walkthrough setup might not work on all cameras.
No way will I ever bother with a youtube account ! by the way, what is a PoE switch ?
A network switch which also can provide power through ethernet cable (CAT6) so other end's device can be run only through cat6 LAN cable and won't be needed dedicated power supply