My pleasure, Thanks ✌ for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any request or questions feel free to ask me other way to support the channel is by using my amazon general link before buying or searching for your purchases :P USA: amzn.to/3A8dJu6 MXN: amzn.to/3BhTZoB Much appreciated 😃
Glad it you liked it, Thanks ✌ for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you got any request or question feel free to ask me anytime my friend. if you wish to support the channel please use my amazon general link before buying or searching for your purchases :P amzn.to/3A8dJu6 much appreciated.
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, it is not a rubber it is a thermal putty, buy it on aliexpress or amazon: amzn.to/3QSR4xJ
no need to change the chip, you need to do a reflow, cover around the chip with aluminum tape and place few drop of liquid flux under chip and then heat it up for 1-2 min at 200c then let VERY important do not touch or move let it COOL down at room temperature dont force the cool down, after 5-10min then use and alcohol to clean make sure its a 99% iso alcohol, then you finished
@Juan jajaja ntp no te vas a agarrar fuego :P tiene que ser Alcohol Isopropilico puro , si no vas a danar tus equiopos, entonces te vas a enojar mucho y se te va subir el fuego jajaja aqui esta link de amazon mexico: amzn.to/3efXiXm este alcohol hasta lo calentamos en tina de ultrasonido hasta 70c o incluso con pistola de calor hasta 400c y no agarra fuego.
that is industrial electric screw driver, they use it in the assembly line, they don't sell them for public. but there are many electric screw drivers on amazon. cheers🍻
re do the process and focuse more on the heat and doNOT move the motherboard during heating and let it cool down by it self for 10min , dont force cooling . the reason for 6-7sec off is that one of the soldering balls still detached.
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: you may have a short on the motherboard, the best option for you is to take it to a technician to check the components. there are many components needs to be checked.
hello my friend gave me his laptop to change the windows but after that when i try to install any drivers or do anything else with it the screen goes black.i was using it without the battery. i gave it to some one to repair it and i know this guy and also i dont trust him much.now he is saying that the graphic chip is damaged and he has done reballing but it is not working anymore
man im so sorry if he (for sure he heated a lot) tried re-balling and he failed at it. not you GPU is dead, you will need a new BGA GPU and some one experience on reballing. now back on your problem, The issue that you get its not because of the GPU is bad or anything, its a very common issue on a windows package update that they placed in. all you had to do when you got the black screen was one of the two: 1. You can quickly reset your graphics driver using the Win + Ctrl + Shift + B keyboard combination. This command makes your screen turn black for a second, but it restarts your graphics driver, which can potentially fix any issues you've been having. 2. install windows 10 version 1909 and then install 1st all the drivers from Dell website and upgrade the bios and then windows update. again we get this issue on hp and dell and some lenovo laptops, and its essay fixed, but unfortunately for you, the STUPID retard half ass douchebag so called technician have fried your GPU by over heating to re-flow (or try reballing). sorry my friend, should of asked first.
uno de las dos,, no viste el video completo o no entiendes ingles :/ en el titulo dice "no da imagen" " reparación imagen negro" y al comienzo prendes y prende las luces pero no da imagen! eso el problema, la respuesta a tu pregunta. ahora si tu pregunta es cual es la causa y reparación!, igual esta en el video y explicado en detalle @10:30 empiezo a mostrar la manera de reparar el chip de video que causa esa problema. saludos
cuando prendes prende focos y no da imagen, y fue explicado al principio. si estoy diciendo, y no van a querer para que ver! llevo 18 años reparando electrónicas, y en esos modelos cuando haya una falla como explicado " prender y prenden luces LEd indicadores y no da imagen" 90% es su GPU fallando!, otro 10% puede ser ram cable flexor, alguna capacitor, backlight, y un million otra cosas chiquitas. pero tabien si no te parece hay otro videos. saludos
Thank you for the feedback and your support to the channel by a SUB :P if you ever got any question or request feel free to ask me. good luck my friend
It worked and am so grateful
My pleasure, Thanks ✌ for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any request or questions feel free to ask me
other way to support the channel is by using my amazon general link before buying or searching for your purchases :P
USA: amzn.to/3A8dJu6
MXN: amzn.to/3BhTZoB
Much appreciated 😃
Thanks man! tahnk you very much
Glad it you liked it, Thanks ✌ for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you got any request or question feel free to ask me anytime my friend.
if you wish to support the channel please use my amazon general link before buying or searching for your purchases :P
amzn.to/3A8dJu6
much appreciated.
Hi i have some type rubber on coler for gpu part should i remove it and put thermal paste?
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, it is not a rubber it is a thermal putty, buy it on aliexpress or amazon:
amzn.to/3QSR4xJ
Thank you very much, it is descriptive and helpful!
Glad it was helpful! thank you for the awesome feed back :)
Do you change de CHip?..or just put alcohol.
no need to change the chip, you need to do a reflow, cover around the chip with aluminum tape and place few drop of liquid flux under chip and then heat it up for 1-2 min at 200c then let VERY important do not touch or move let it COOL down at room temperature dont force the cool down, after 5-10min then use and alcohol to clean make sure its a 99% iso alcohol, then you finished
@Juan jajaja ntp no te vas a agarrar fuego :P tiene que ser Alcohol Isopropilico puro , si no vas a danar tus equiopos, entonces te vas a enojar mucho y se te va subir el fuego jajaja
aqui esta link de amazon mexico: amzn.to/3efXiXm
este alcohol hasta lo calentamos en tina de ultrasonido hasta 70c o incluso con pistola de calor hasta 400c y no agarra fuego.
Can you say the name of Tool that you use at 8:15 ??? I can't remove the screen 🫤
that is industrial electric screw driver, they use it in the assembly line, they don't sell them for public.
but there are many electric screw drivers on amazon.
cheers🍻
how to fix the back light of dell inspiron 1520?
I also have the same problem but after this process when I plug in charger it turns on and off automatically after 5 to 7 seconds
re do the process and focuse more on the heat and doNOT move the motherboard during heating and let it cool down by it self for 10min , dont force cooling . the reason for 6-7sec off is that one of the soldering balls still detached.
@@uFixTek but it doesn't produces any type of heat when turn on. Other wise I will check any detached ic or other thing
@@uFixTek no any fan or hard disk sound they don't work
My lap on the button After 5 second automatically off
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: you may have a short on the motherboard, the best option for you is to take it to a technician to check the components. there are many components needs to be checked.
hello
my friend gave me his laptop to change the windows
but after that when i try to install any drivers or do anything else with it the screen goes black.i was using it without the battery.
i gave it to some one to repair it and i know this guy and also i dont trust him much.now he is saying that the graphic chip is damaged and he has done reballing but it is not working anymore
man im so sorry if he (for sure he heated a lot) tried re-balling and he failed at it. not you GPU is dead, you will need a new BGA GPU and some one experience on reballing.
now back on your problem, The issue that you get its not because of the GPU is bad or anything, its a very common issue on a windows package update that they placed in.
all you had to do when you got the black screen was one of the two:
1. You can quickly reset your graphics driver using the Win + Ctrl + Shift + B keyboard combination. This command makes your screen turn black for a second, but it restarts your graphics driver, which can potentially fix any issues you've been having.
2. install windows 10 version 1909 and then install 1st all the drivers from Dell website and upgrade the bios and then windows update.
again we get this issue on hp and dell and some lenovo laptops, and its essay fixed, but unfortunately for you, the STUPID retard half ass douchebag so called technician have fried your GPU by over heating to re-flow (or try reballing).
sorry my friend, should of asked first.
Nunca mostraste cuál era el problema
uno de las dos,, no viste el video completo o no entiendes ingles :/
en el titulo dice "no da imagen" " reparación imagen negro"
y al comienzo prendes y prende las luces pero no da imagen!
eso el problema, la respuesta a tu pregunta.
ahora si tu pregunta es cual es la causa y reparación!, igual esta en el video y explicado en detalle @10:30 empiezo a mostrar la manera de reparar el chip de video que causa esa problema.
saludos
@@uFixTek el video comienza desarmando el PC, nunca mostraste las luces de la falla antes de reparar, fallas con pantalla negra hay muchas
cuando prendes prende focos y no da imagen, y fue explicado al principio. si estoy diciendo, y no van a querer para que ver!
llevo 18 años reparando electrónicas, y en esos modelos cuando haya una falla como explicado " prender y prenden luces LEd indicadores y no da imagen" 90% es su GPU fallando!, otro 10% puede ser ram cable flexor, alguna capacitor, backlight, y un million otra cosas chiquitas.
pero tabien si no te parece hay otro videos. saludos
Jfjf
Thank you for the feedback and your support to the channel by a SUB :P
if you ever got any question or request feel free to ask me. good luck my friend