How to CNC Milling machine DIY, Part#2 Epoxy granite into Frame
Вставка
- Опубліковано 25 кві 2024
- This is the Part#2 : Epoxy granite packing into Frames of my CNC milling machine DIY. You can see the method of mixing Epoxy with gravel, sand and the process of packing into the frames.
This Epoxy granite gives enhanced characteristics in stiffness and noise, vibration & harshness of the CNC milling machine Frames.
One quick information for you is the weight of the frames before and after Epoxy granite packing below
- Weight of the frame before (excluding reinforcement plates, end plates and nut plates) : ~ 34 Kg
- After : ~90 Kg ( 260% up)
- Weight of Epoxy granite : 56Kg
* After total weight in the chart of video 97.6 Kg (it's typo) need to be corrected to 90 Kg^^
If you enjoy and would like further contents, subscribe & hit Like signal please.
I would like to communicate with you! You can give comments with your question or advice.
Thank you! - Наука та технологія
Beatiful work!!!
Would appreciate your beautiful word!
대단합니다
기계에 이어 화학적인 성분까지 다루는군요
잘 보았습니다
다음 편이 벌써 기다려집니다
Super great !
격려 코멘트 고맙습니다. 화학적 성분까지는 아니고요~ 기계적 강도, 진동특성을 높이기 위해 에폭시 화학 제재를 충진하는 것입니다.
열심히 최선을 다하는 모습, 보기 좋네요.십여 번 대화 나눈 것이 전부인데~~
뭔 가 도전하는 것 같아 더욱 더~~
がんばれ✊‼️
격려 고맙습니다! 가끔의 대화도 일상의 즐거움입니다~ 친환경유기농TV도 화이팅입니다^^
Wrong mineral proportions. too many huge fractions
Suppose you mean too much gravel and sand ratio compared to epoxy?! I had altered it at that time and with the ratio I selected I remember reasonable "viscosity" for filling and expected it to give better damping performance (esp. for low frequency) with that epoxy granite not only for providing stiffness of the frames. Will recheck it in next building with your thanks opinion.
@@cncforall12 mineral casting is not simple for building metalworking machines. measurements show different value at lifetime, it change geometry if used wrong proportion and had no heating process