How To Install A Power Acoustik PWM-16 Equalizer
Вставка
- Опубліковано 8 вер 2024
- installing power acoustik pwm-16 equalizer in my truck. this is a great affordable product if you are looking to give your system a boost without spending a whole lot of money this is your way to go....
#pwm16 #equalizer #poweracoustik
It’s so good when you know how to do these things yourself. It saves you money and helps you make money.
Yes it does thanks..
Great video man, helped me figure out my wiring problem 🙏🏼
Glad it helped you bro thanks for watching.
Thanks for the video lots of good info
I was looking to add a eq in my 02 Tahoe I ordered the same eq $28 & dash kit $12 on Amazon
Hey thanks for watching, and you definitely wont be disappointed.....
Man I tell u what how do I run the power acoustik preamp equalizer to my deck and boost my door speakers and 6×9's without having to have a actual Amp
You need an amp with this EQ, it's the only way.
I have an equalizer where do you recommend to control the volume the head unit or eq?
I set the volume at the EQ but I control the volume at the radio. Now I do go up and down on the Bass knob from the EQ because each song is different.
Hi so you plug the cd left and right output on the equalizer into the front left and right input on the stereo? Also I was wondering can you plug the aux into the rear left and right input?
yes. i would use the aux would be for like an ipod, mp3 player etc...
Can I just tap into the same wires that were used for the radio? (Consistent 12v, ignition turn on, and ground)
Yes you can.......
Is the dash for a single din or double din?
single din.
Can you lower the singer's voice and leave only the music with this device? And what about Echo?
You can fine tune it but i don't think it will do all of that. Some radio's will do that though....
Hey for the speaker amp there’s already 4 rcas running to the headunit to the amp but the equalizer uses another 4 rcas to the amp? What I do unplug them from the amp and connect it to the equalizer? Kinda know for the sub amp 2 rcas from the headunit to the amp then another set rca from the amp to the equalizer right?
send a pic to my email so i can see the setup
How do u run the power, ground and remote there no wires in the plug just a loose power wire
Try to pick up you some primary wire, about 3ft of blue, 3ft of red, and about 3ft of black. You can run these wires off your radio harness, Red wire to power + = 12v, Blue wire to remote wire off radio, and Black to - ground of radio.....
I got the same eq watched this and peeped I had to run the rca’s from the cd output off the eq to the deck but when I did that I don’t get any sound at all. Everything is ran correctly idk why I’m not getting any sound what do you think it could be
Try running the rca's from the amp straight into the back of the radio to see if you get any sound, and then we'll go from there...
That’s what I ended up doing and the music came right on. Idk if it was a faulty eq, too much power going to it or if my deck wouldn’t allow it to work because it’s already a 10 band eq in it
Ok
Do you know anything about the audio control 4xs crossover and do you run the epicenters in any of your vehicles?
I use to run epicenters when i use to listen to a lot of old music, but theses days i build me a nice ported box to specs, get a good Eq, Head Unit, and adjust everything properly and your good to go...
Hook EQ up to deck didn't get sound from nothing and all my grounds are good and also on the Deck i have one RCA and one sub output and headunit is a Sony MEX-4300BT please help...?!
Check your fuses, and make sure your amp is turning on when yoy power in the radio.
@@Change4ADollar I'm check those right now and I'mma hit you back in few minutes...!
Also the EQ I'm running is a eqs-746 don't know if that makes a difference but that's what I'm running
All fuses are good and I'm running a SK-M4004D amp for my highs
And I'm running a RP-1200.1D for my one sub
Where’s a good spot to hook up the battery and remote wire without tapping into the head unit?
The fuse Box....
@@Change4ADollar thanks I appreciate!👍it great video!!
@@Keepthefaith116 you're welcome, and thanks for watching....
@@Change4ADollar quick question I’m having trouble with hooking up my eq I have everything connected and powers on but my for some reason I have no sound coming from my others speakers just only the doors speakers are playing and I’ve even tried increasing the volume and still no difference and I’m only using a loc so what could be the issue is it because I don’t have a aftermarket radio??
@@Keepthefaith116 2 channel or 4 Channel amp? Do you have all your speakers hooked to the amp?
Hey so I was just wondering where you got your dash kit from that fits the eq in it
Amazon or pepboys....
Can you make it sound like concert hall or nah?
no but you can buy a aftermarket radio with those options.
Which Pioneer model is your radio?
Pioneer DEH-X6910BT
Are graphic equalizers any good! I got a kenwood excelon 13 band! Sounds good already 5Volt!
yes those are actually really good, you just have to adjust them right....
Change 4 A Dollar 💯🤘🏾!
Check me out on my CD Shawn UA-cam...
I see those two bass knobs and you have something in common with my current install.
Ok...
Why do I got words coming out my subs
Most amps have HPF, LPF, FULL RANGE. Make sure it's set to LPF (Low pass filter)
Another “how to video “ with the eq already installed and guy says
Easy 🙄🙄🙄
I'm explaining how to do it in the video, it's very simple, and a lot of people were able to complete the instead without a problem. If you need further help you can always email me. Thank you......