Titan ED655 Prime Valve Replacement

Поділитися
Вставка
  • Опубліковано 30 жов 2024

КОМЕНТАРІ • 30

  • @marcosjimenez6169
    @marcosjimenez6169 3 роки тому +1

    I love to use this little pump to spray clear
    Lacquer , and once in
    a while some white lacquer thanks for the video!

  • @dougw2340
    @dougw2340 4 місяці тому +1

    A few details missing. The big nut is what holds the whole thing on. Screw it back on too tight and you can strip the threads on the head right off. The knob nut and screw slot in the needle just control the Prime/Spray adjustment. Knob nut screwed in too far will keep in in Prime mode all the time. You need to put a screwdriver thru the 8mm socket to hold the needle while turning the nut. The o-ring adds resistance to pulling the needle out. I had to work it to get mine out. Finally, not sure why you would need to replace the whole assembly. It's just a needle that closes off a hole. Not sure how it wears out. Mine just needed a new 1/2" O.D. 3/8" I.D. O-ring because it was leaking.

  • @The__Painter
    @The__Painter 6 місяців тому

    Good day sir, do you know torque specs for head bolts thanks much good content 👌🏽

  • @anthonyrivasacl6383
    @anthonyrivasacl6383 Рік тому

    I really hope you answer my question. I have the same machine but when I’m spraying and I look at the flow of the water or paint come out of the tip, it shakes aaaalll the time . What can I do to fix it?
    Where do I buy the parts

  • @warrenking7965
    @warrenking7965 2 роки тому

    Thanks for posting. Mine stopped working and I think this is the issue. I wonder why it has to be replaced rather than just reassembled.

    • @thebeardedfinisher
      @thebeardedfinisher  2 роки тому

      My best guess is the parts that are unreplaceable like washers and such.

  • @The__Painter
    @The__Painter 5 місяців тому

    Good day sir, i cant seem to get the screw off the prime knob. Srcew just turns and turns and does nothing. Any suggestions? Thanks much great content

    • @BeardedShrum
      @BeardedShrum 5 місяців тому

      😬😬 May be broke or stripped. That may need someone with a little more knowledge regarding repairs than myself.

    • @dougw2340
      @dougw2340 5 місяців тому

      My prime valve drips a little. Do you think it needs a new valve or just taken apart and cleaned?

  • @heruvey87
    @heruvey87 Рік тому

    hi my guy, nice video. I have a question, on my Titan ED655 i have a small hole underneath the machine and i never noticed it some im wondering if they are all like that or if mine broke o.o

  • @juicemcnorway
    @juicemcnorway 3 роки тому

    I’ve been told by the repair shop, along with my friend who tried to repair his, that they are pressurized. You mentioned you took it all apart and cleaned it. Is it spraying properly if it is no longer pressurized?

    • @arturo4700
      @arturo4700 3 роки тому

      No

    • @duartepaintinghandymanservices
      @duartepaintinghandymanservices 2 роки тому +1

      It's not pressurized, they are meant to be work on, the hydraulic assembly isn't completely full either they only fill it about 80%

  • @ronfladell5648
    @ronfladell5648 3 роки тому

    Nice Video ..Thanks...What gun are using with it?

    • @thebeardedfinisher
      @thebeardedfinisher  3 роки тому

      We use the Graco contractor gun. I’m not a huge fan of titan guns. When spraying waterborne I like 2/10 or 3/10 FFLP

  • @tonymantana990
    @tonymantana990 3 роки тому

    Thank for sharing love big dude

  • @sonora2323
    @sonora2323 2 роки тому

    I have the same machine and recently it lost some of the pressure and starting to get this orange peel finish due to low pressure
    Any ideas what might the the problem?

    • @duartepaintinghandymanservices
      @duartepaintinghandymanservices 2 роки тому +1

      Try a new diaphram, they are pretty inexpensive, also make sure the inlet valve is moving freely, pour pour some thoat seal and moving with the top of a pencil to lubricate, also outlet valve, theres a ball and seat, make sure thats moving freely

  • @nicholasmarshall2028
    @nicholasmarshall2028 Рік тому +1

    Where can I buy aed655 I’m in the uk

  • @joseguzman7459
    @joseguzman7459 3 роки тому

    Question, I cant get it to pump/prime or do anything?? Any help?? Thank you guys!

    • @duartepaintinghandymanservices
      @duartepaintinghandymanservices 2 роки тому +1

      Try to dissamble the top and make sure the inlet valve is moving freely, also you can open the outlet valve, theres a small spring in there with a ball, make sure thats also clear and moving freely

    • @joseguzman7459
      @joseguzman7459 2 роки тому

      @@duartepaintinghandymanservices thank you!

    • @duartepaintinghandymanservices
      @duartepaintinghandymanservices 2 роки тому

      @@joseguzman7459 yw

  • @davidbenitez2709
    @davidbenitez2709 3 роки тому

    have you ever change the oil on diaprham ??

    • @thebeardedfinisher
      @thebeardedfinisher  3 роки тому +1

      Never… I added some one time when I took apart and it spilled out but never changed.

  • @ernestamar2919
    @ernestamar2919 2 роки тому

    Where can I get this valve replacement?

  • @nelsoncanenguez7058
    @nelsoncanenguez7058 3 роки тому

    Where you buy the replacement

  • @uly8823
    @uly8823 Рік тому

    Mine doesn’t even prime or anything what’s wrong ?

  • @duartepaintinghandymanservices
    @duartepaintinghandymanservices 2 роки тому +1

    Damn, do you not know how to pour paint, looks like you get more paint on the machine than the hopper 😂😂