How to install drip edge on a roof.
Вставка
- Опубліковано 7 жов 2019
- In this video, I just show a quick install of some drip edging and how to cut corners. As always thanks for watching! Catch you on the next one! Yo Sonny!!!
my-store-10694131.creator-spr...
high_ridge_handyman
blog.feedspot.com/handyman_yo... - Навчання та стиль
Great short video ..... you helped me out ..... thank you.
James J thank you👍🏻 thanks again for watching 👍🏻👍🏻
Your first corner should have been tucked under the piece coming down the side. The second corner was correct.
topshotrhit I saw it after . Ended up taking it all off and redoing it. Thanks for watching TOPSHOT👍
@@HighRidgeHandyman I've watched several other videos where they hack the edges to death - yours is simple simon, no sharp edges, and beautiful. I read the comment about tucking under the piece, something I shall do. I am re-tarring and papering backyard patio roof (Never having done anything like that) and am learning how via video's like yours. Thank you for the video! Oh, and now I know I need tin snips!
topshotrhit I was going to saw the same. His other corner was good but the first was wtf?
topshotrhit exactly
Would I use this method on a hip roof?? I realize the angle will be a little off at rounding the corner to the other hip..
"SEEMS SIMPLE ENOUGH BUT I, VE SCREWED IT UP A COUPLE OF TIMES" THANK,S FOR VIDEO!! I took a picture so when in doubt look at the picture; thank,s again Patrick P
short and sweet, not wordy, great info. thanks!
I like this drip edge design. simple, flexible as well.
Thanks bro👍🏻
Good job only problem I see is the first corner is supposed to go under versus over the second corner was done correctly I appreciate your demonstration it will help me to do my roof .
Shawn Maxx thanks I did realize the first was over instead of under. Thanks for watching. If I could edit this I would. Or even add a clip. Have a good holiday weekend
Excellent Simple Video Brother, Thank You Sir
Good info and simple demo. Thanks for the video. The comments were helpful too.🙂
Thanks Underdog👍🏻
Nice way to make your corner so neat.
On the corner you also need a cut at the bottom through to the other bend in the metal and that way your lip/ bottom bend will not flatten out when you bend the metal.
Looks clean. Thanks!
Thanks for the help. My first time installing drip edge...building a chicken coop.
Good luck. 👍🏻
Thia is exactly what I was trying to figure out. Thanks!
Thanks Mars👍🏻👍🏻
Thanks for the video. I have a low shed and using this method it won't have sharp edges on the corners.
That's nice!!!
is the horizontal drip metal supposed to be under the gable drip metal (on the left corner) to match that the right corner ?
It helps to cut a small on the bottom of the drip edge where the corner will be. This helps to avoid the aluminum from buckling in any way
Oops...a small v. Would look like an upside down v
Visually from a non roofer perspective (this way looks cleaner to me) but you’re not wrong
Easy... Fast... and.... simple... tanks for ur help
My first cut should have folded under not over just like the second cut. Thanks for watching👍🏻
The drip on the left side should have the bottom underneath the lap? As you show the water comes down on that left corner and will go into/underneath the eave curve?
pretty cool...looks good 👍
kingofthecrease30 thanks king👍
But what if there is a slanted gable fascia (a rake) going UP after you turn the corner? I assume you would then need two separate pieces?
Good day. Please note the second cut/bent was overlap correctly. The first one has to be cut bend under not over. Thank you.
Agree
I was thinking the same thing
If you have fascia under this the corner here can cause water running down the fascia corner. I don't know the solution but the solution is what I am looking for.
They sell much larger drip edge with more of a bottom flare. But with gutters installed they should also protect the fascia
Bro..congrats on the views here! Haha well done
I have seen videos where they cut the ends of the eave drip edge a bit...and fold them back...then the rake drip edge just lays over that on each corner. yours obviously wraps around....I guess my question is...is one better, or is it just personal preference. Your looks better for sure. But is the a best way to do it.
U should do the bottom first cut the kick just a little then u cut into the top of the bottom drip edge 3/4 and fold then cut the rake at the angel. Think like a rain drop
I like quick vids.
Me too👍🏻
From what I've read, typically the drip edge on the eave goes down first, then the asphalt paper overlaps that drip edge, and *then* the rake drip edge goes on, covering the paper. So the rakes and eaves should be two separate pieces. Nice job on bending the corner, though - that's helpful for other applications!
One thing to keep in mind. If a gutter is going to be installed, it usually gets tucked under the Drip edge. The gutter people will cut the Drip edge to get the gutter to reach the corner of the roof or even go past by ½ inch.
My point the eve (Drip edge) should be its own piece and the rake Drip edge should be its own piece.
Can you use the one drop edge piece to complete the drip edge?
What do you do when your roof line is 10 feet 6 inches and only 10 foot edges are available.
Ok, I know you overlap with another piece, but how do you make it look "professional"?
I'm doing a porch for someone. The linear edge is much longer, probably 19 feet total to get all of it done, but I don't know if I can go from side to edge. Just wondering if the best application is to do one short corner (does not have much of a rake on the back non-curb side appeal). Should I wrap around and join on the side, or center on the eave and get two good round corners and then snap straight pieces up each rake flush to the house siding?
Kistilan I would center on the eve and get to good corners then over lap about an inch on both sides going to rake . Good luck👍🏻
@@HighRidgeHandyman That's what I was leaning towards after several videos and finishing with yours. Definitely makes working around the Ice Barrier and not having to lift up the rakes that were tacked on a thing I won't have to contend with -- just those bends which I can lift slightly and tuck under.
Thanks for the reply in this crazy time of day (COVID19). Appreciate it.
Very well done Trip Dip!! It's nice to see the folded over corners rather then when hacks chop it up into multiple pieces. Hope all is well & Dirty Jersey out!!!
Money Making Mike G. Thanks a lot mike G!
Jersey representer..salute!!!
Thanks... I appreciate it..
Thanks for watching Super👍🏻
Does this method work for a 12/5 pitch roof? Would think the angle might make the eave end lay funny.
Use two different drip edge when working with such conditions.
Looked nice. Does the water stay over the drip ledge from above? Or does it go underneath a little?
First corner was put down incorrectly it had to be flipped over and it’s been almost a year and there is not one drop of water anywhere underneath! Thanks for watching take care be safe
The bottom peace isn’t under the sides? The water is going to hit the wood
First cut should have been overlap like the 2nd cut and fold.
How does the water run? Your folds are wrong.
I do it the gangster way, tab and miter not cut and fold. but I also do alot more 24 gauge and standing seam. currently doing zinc coated copper panels on a big commercial project (3year project) and zinc coated copper wall panels. I also do pvc, tpo, modified torch down, cold process, epdm, only thing I don't touch is shingles. I call them guys shingleberries
Don’t ever forget where you came from bro👍🏻 We ALL start off as shingleberries.
Nice video. My observation is that The first fold should be underneath so as not to collect water
macleryy your observation is 100% correct 👍🏻 thanks for watching and commenting.
We both learn. 👍👍👍
Testing Drip Edge Installations on Roofing | Ask This Old House on youtube
great
Lower edge should be tucked under the down sloping edge to run it over
rake and eave metal should be 2 pieces since underlayment goes on top of eave metal but under rake metal. also, if gutters are to be installed you cant get them under the eave metal if it is continuously wrapped around and up the rakes
Unless your installing epdm rubber roof, you can fold your epdm over the fascia board then istall drip edge and then cover with cover tape all the way around on top of drip edge flange. But yeah
Quick note, if this were a roof on a house etc... you wouldn't be able to wrap the corner because it has to go into the eavestrough.
Great video! Just a quick tip - get a tripod or cameraperson.
Says the guy with no videos
I live in SW Pa and cant find that type drip edge. I'm hoping to find it online .
I picked it up at my local Home Depot. But Materials are tight lately with all the stuff going on. Hope to get back to normal soon. Good luck Benton👍🏻
Try the Philly stores
Thanks, I’m guessing the same for my hip roof Gazebo??
👍🏻👍🏻
You didn’t show it complete .did you just overlap the last piece? Then do you caulk the overlap?
Wouldn't water get underneath the first corner?
Norberto Reyes yea I flipped it around when I put the shingle on. Good eye Norberto👍
I can’t see where you cut if you cut that little area or to that drip
One cut across the top edge at the corner then fold it around corner. Btw the first corner I should have overlapped like the second to prevent future water getting underneath.
Do you think drip edge is better than gutters?
STOCKBOY7254 I use both. If I’m putting up a gutter I make sure the drip edge is pulled away from the facia and it’s over hanging into the gutter so the water runs off into the gutter. If you leave the drip edge against the wall when installing the gutter the water will run off the roof and follow the drip edge behind the gutter and eventually rot the wood. But for a small overhang like this one I’d just have the drip edge with no gutter. Good luck stockboy thanks for watching 👍
@@HighRidgeHandyman The only reasons I'm asking is the leafs,acorns,branches are clogging my gutters.Someone told me the leaf guard gutter systems no good.Im 69 years old been up to clean the gutters 3 times its very dangerous gutters are high.Any ideas?
That's a beautiful install method but what If the homeowner ever decides to get gutters. Won't they have to cut it on that corner to get the gutters in?
yes, one of many problems w this vid
Great video, but the corner facing downhill told be overlapping the bottom price so water rolls off
I know the first one was wrong. The second one was good. Thanks for watching Allen👍🏻
The more I watch drip edge installation videos the less I know.
LOL MAYBE Quit while you’re ahead bro
@@HighRidgeHandyman that's exactly what I did after this video. Whatever I do it's going to be what it's going to be. I got some snips, some pieces of drip edge and a shed that needs a new roof. So something is bound to happen as soon as it stops raining.
First corner was lapped wrong, but still. Cool video
When you folded the drip edge on the corner you shoulda ran the bottom part un the top piece btw
I’m aware thanks for the observation 👍🏻 only 25% see the error👍🏻👍🏻
Mine keeps tearing when I fold it
Just snip the top easy to the edge and bend easy to fold. Sometimes thinner drip edge will tear easy. Good luck 👍🏻
Some of them that have a different profile and you can not fold them around. The one he is using is a very basic flat profile so it can wrap around
Overlap on the corner is wrong,water will leak into that over lap
Great video! Where do you buy the drip edge ?
The Home Depot
This method makes it a pain to install gutters.
I thought drip edge went over the paper on the sloped edges and under it on the horizontal edges. Then again, I've never done roofing.
Paper goes over the drip edge at the eave and under at the rake depending on what state you are roofing in. Some states all underlayment goes under metal. But this video was to demonstrate metal installation
That appears to be gutter apron instead of drip edge.
You did the first corner wrong the sloping piece should end up over the horizontal piece. Any water running down the edge can potentially run under the front piece.
Chris M I realized it after watching it. The second one was correct. I did change the first. Thanks for watching. Take care bro👍🏻
My 7 year old says this wouldn't work. Water will go under the drip edge...no roofing cement or silicone...surface tension...?
Adina Bogdan I reversed the drip edge corner so the water would run off. As for the cement or silicone while having the roofing paper would be overkill for this small overhang. Maybe you post a how to video to help us all out👍
No, stop buying roofing "cement" from lowes. Underlayment, and shingles, thats it. Stop it
Chad Yost only the Depot bro only the depot👍🏻
Nice camera work. Lol
😂😂😂
nexttime when you do corner review your work so that youlearn from your mistake
Really? Thank you for that observation.
Hmm so that's how you cut corners, I thought it was just a phrase
Every time you cut a corner...the camera moved from the cutting.
Holding the camera while doing it. Old video. But thanks for the heads up👍🏻
Here's how to cut (pulls camera away...)
this video wouldnt be soo bad if he kept the blasted camera still
Patty J camera was cracked and wouldn’t focus. Replaced since. Sorry patty👍
The top of the rake drip edge should should be on top. Just sayin.
Overlap is wrong on the first corner
Yes it is but the second correct. Great eye👍🏻
First corner over lap is wrong, second is right.
I fixed it. Tried to put in extra video after I posted it. I was unable. Thanks for info👍🏻
Yeah. Nobody seen the cut
WARNING..... "cutting a corner" is exactly what you doing. This method does not comply with shingle manufacturers' installation instructions for drip edge. Read them for yourself.
Never do that. You can't install aluminum fascia and or trough properly because it's tonight. I see this often and take an freaking chisel to it and split
Never do what?
It was supposed to say to tight. I run into it all the time. Guys think they are doing something good but it's not. Unless you leave it proud of fascia. And most roofers also pull starter to tight to fascia everywhere and we can't get aluminum fascia on properly, which makes the idea of it being a drip edge redundant
Sound off like you got a pair, mumbles.
Ok liver lips . I’ll remember the next time👍🏻
Always nice how to show people the WRONG way to do it.
Amateur hour!
That middle piece should have been folded under the rake!