Canon states it does not have updated Drivers for Windows 10 for the older models. Mine is 2016. No driver exists on the Canon website. I've tried every suggestion, like using a Windows 8 driver. However, my Windows 10 has rejected ALL DOWNLOADS! For INCOMPATIBLITY!
Hi i've been trying this it went well but at the end of the installation of the driver it keep on saying the printer is not detected after a while so i need to turn on and off my printer ..do you have any solution for this? Please help
Thank you. This hit the target for what I was looking for. This is not just a 10min unboxing and talking about it type of video. It shows you how to install the driver to actually get operational. Thanks!
This was so helpful. My Driver is now available and I am printing away. I didn't have to wait for the Geek Squad to call me after waiting for hours to hear back from them. Yay!
Been struggling with my printer then i saw this video n I followed all the instructionsnow my printer is working and my laptop is able to detect it . I am super happy honestly. Will be able to do print out n write my exams . Thanks you soooo much😭😭😭😭😭😭😭😭😭❤God bless
Thanks so much I had to do an recover on my laptop n didn't have the CD to my canon printer..thanks for making the video now I have my printer back on my laptop n am able to print! 100% works!
I want to thank you for this video - it was a huge help. I thought I had run the printer program on my new laptop - but did not realise there was a separate driver for scanning. Doh !
I have followed the instruction and reached at the point where it was showing the msg for connecting the printer to laptop. You pushed the cancel button because you did not want to install the driver but I connected the printer with laptop and it detected the printer and start installing the remaining but it stayed they like forever. Never went farther. . What seems to be the problem. I have also changed the USB cable twice. Please guide me through
i had the same exact issue. i must have canceled and restarted the installation at least 5 times and kept getting stuck on that connection to printer page... i had to go into My Devices and forget that printer, turn off my PC, turn it back on, and power back on the printer. after that, my PC recognized the drivers and the printer.
Thank you for this lovely video your voice is crystal clear i followed the instructions its really helpful therefore i am subscribing you too....thanks
Thank you for this video. It really helped alot. Everything went smooth until the end. Im trying to connect through USB. First is says printer detected. Wait until the installation is complete. Then after a while it says printer not detected. I end up having to turn the power on the printer off then on again. Then it will go back to saying printer detected. Wait until installation is complete. It seems to be stuck in a loop. Any advice?
I am in same situation please help😓😔how did u installed it......... In my screen it is showing 'the printer is detected please wait installation is completed' as a loop
Canon will not issue drivers for this model to support the Windows 10 operating system. The Windows 7 drivers should function in the Windows 10 environment with some limitations which are currently unknown to Canon.....Any Ideas?
Love all your videos as they have helped me in the past. My latest problem is, I have a Canon Pixma MG4250 printer and it has been working great for years with NO problems, until recently. Something happen with using the scanner, usually it worked automatically, but recently when I press the scanner button, I get the message "configure scanner to PC" it no longer does it automatically. I can scan using the scan utility tray, but it will only scan one page in PDF, whereas before I could scan multiple pages within PDF. Any suggestions on how to fix this?
thanks for the video, i got stuck on that very last step, the installation program asks to connect and switch on the printer, I do so, hear the "bleap" from my Lenovo laptop and then...the installation program tells me it cannot detect the printer, any advice please?
@@lhynchan8699 i solved it. While it says that printer cannot be detected, go to settings > devices > printers and scanners After that , click on canon mg2500 and remove device. Then the printer will once installed back automatically. And you may be able to proceed the next step.
Darnit..not working for me ..says my laptop is connected to my Mg2500 Pixma series printer but keeps saying driver not found after i follow all of the steps unfortunately ...lonnng siiigh 😕
When installing make sure there isnt a "dead" driver on control panel. Simply go to control -> drivers and devices -> remove. This is so you can get a clean install. Otherwise drivers may fail over and over.
@@jaydenabreu5011 no just right click on the printer and click on remove>then turn the printer off, unplug it, plugged it again, and turn it on that should solve the problem
Hey, md. it was awhile ago since you have posted this, but im trying to install the driver, and about 15 minutes in, it says printer not detected, so i turn it off, and turn it back, and then it detects it again, and about 5 minutes in, it shows the same message, and never ends up installing.
Hi, I am having issues when it comes to detecting my printer. All is plugged in correctly and printer is on and it will detect the printer but then within 5 minutes it will change to say no printer is detected and to check connections
Should I use the disk that came with Canon pixma mg2522 printer? When I did it like you say it ended up saying no drivers were not installed. Yet on my Windows 7 older computer it worked. But I want it to go on my Windows 10 computer I just got.
I have a canon MP 140 and no drivers availble for win 10. Comment from Cannon : "Canon will not issue drivers for this model to support the Windows 10 operating system." Thank you canon
hi, i have a problem, i installed the drivers of windows 7 on windows 10 (Cause there aren't for w10) and I can only scan, i have no the option to print (sorry for bad englids)
im still at the step 3 where i need to connect the printer to laptop. but somehow even I already secure the connection, I still can't install the driver.
Hey i recently bought this printer,i did everything you said but when i get to detection of printer it says wait for installation and stays there,then it shows the start over thing again
My printer says that it's connected on step 3 and that the installation is finishing, then it says that it's not connected, even though it's still on and plugged in. Any advice or help please? Thanks in advance and have a golden day!
I have problem with mg2500 series. It cant print my page number and some footnote. And when i print some picture the botom area wont print more than half inch either. Any sugestion how to fix it..
I do everything it shows, then on step 3 it asks to connect my printer to the computer so I do that. It detects the printer and says “the printer is detected. Please wait until installation is completed” and it just stays there. It doesn’t do anything, I left for half an hour and still stuck in the same screen
Hello, it keeps asking me to check if the printer is connected. I do then it connected after a little bit it tells me to check over and over again. I’m this close of giving up😩
When I run the setup, it says "failed to acquire information on the driver and software. Check network connection and try again" I have downloaded the software from official cannon website as well as some other sites and they all say the same. I have tried running the setup on clean boot, tried your tutorial on Fix error please check your Network Connection in Win10, tried using a completely different internet connection, manually tried changing dns, disabled firewall, reset my router, uninstalled my antivirus, contact Nasa, jumped from a building, flew at the speed of light in the vacuum of space and the error still persists....please help!
Hello .... I found this video very very helpful and I was able to follow and download. However, no matter how many times I have tried and retried and switched off etc etc etc it will not complete the installation process. It gets to the point where it detects the printer and starts the installation but then after a fairly long period telling me that it is processing the installation then it says it is not detecting the printer has failed!! This has happened at least 20 times ......... what to do???????// Thankyou for any guidance yo can give me
This is exactly what mine is doing now. Did you figure out what the issue is? How he ended the video is where mine is stuck at saying it can't detect a connection.
@@jenniiilee oh yes. I haven't got it sorted yet. It is so frustrating. Iwas hoping that it might be because I was using my hotspot and not an actual wifi connection. I have wifi being installed tomorrow and will try again. But presumably you are using a wifi connection .. so we'll see. I will let you know.
It’s literlally isen’t doing anything at the part you clicked cancel. i plugged and unplugged the printer but nothing happend. I have retried about 6 times now. I really need help
I'm trying to install my Canon printer, I got all the way to the last step, while I was waiting for completion it said completion was incomplete and went through the connection
Hi sir my printer is Canon g 2010 series the documents are scanned but did not save in file what is the problem and how to solve this problem pls tell us
hello, i’m on a windows 10 pro and i’m not sure what to select when it asks for my operating system because there’s no option for windows 10 pro, what do i do?
I get to the point where I downloaded the driver for downloaded and download the driver and when it's downloaded I go there and I click the folder open folder and it pulls up a little man this is for security and performance performance Windows 10 is in s mode runs Microsoft verified apps to get this app you'll need to switch out of s mode what do I do because it tells me it's not safe to switch out of s mode
Did I help you? Consider a one time contribution to support new daily content on this channel. www.paypal.me/MDTechVideos
Canon states it does not have updated Drivers for Windows 10 for the older models. Mine is 2016. No driver exists on the Canon website. I've tried every suggestion, like using a Windows 8 driver. However, my Windows 10 has rejected ALL DOWNLOADS! For INCOMPATIBLITY!
@@Shyeena MEMES. THE DNA OF OUR SOUL
Your paypal is error I depositted $80,000 but it stated error so i will rather donate this to others.
Hi i've been trying this it went well but at the end of the installation of the driver it keep on saying the printer is not detected after a while so i need to turn on and off my printer ..do you have any solution for this? Please help
Its a shit
Out of all the videos I watched to install this printer. Yours is the only one that helped me.
Glad to help!
Thank you. This hit the target for what I was looking for. This is not just a 10min unboxing and talking about it type of video. It shows you how to install the driver to actually get operational. Thanks!
Glad it was helpful!
This was so helpful. My Driver is now available and I am printing away. I didn't have to wait for the Geek Squad to call me after waiting for hours to hear back from them. Yay!
Glad I could help
Been struggling with my printer then i saw this video n I followed all the instructionsnow my printer is working and my laptop is able to detect it . I am super happy honestly. Will be able to do print out n write my exams . Thanks you soooo much😭😭😭😭😭😭😭😭😭❤God bless
Thanks so much I had to do an recover on my laptop n didn't have the CD to my canon printer..thanks for making the video now I have my printer back on my laptop n am able to print! 100% works!
You're welcome!
Omg thank you so much. My laptop doesn’t have a disc and I needed this for my business !!
Thank you I just purchased my new printer and your video helped me connect it to my Dell laptop. Happy Thanksgiving
Glad it helped, and same to you!
I want to thank you for this video - it was a huge help. I thought I had run the printer program on my new laptop - but did not realise there was a separate driver for scanning. Doh !
I was able to do it myself! Your explanation is simple and straightforward! Thank you so so much!!!
Thank you! You were the only one that gave all the details and orientation to get it done!
You're welcome!
I have followed the instruction and reached at the point where it was showing the msg for connecting the printer to laptop. You pushed the cancel button because you did not want to install the driver but I connected the printer with laptop and it detected the printer and start installing the remaining but it stayed they like forever. Never went farther. . What seems to be the problem. I have also changed the USB cable twice. Please guide me through
@Rvmb not yet
i had the same exact issue. i must have canceled and restarted the installation at least 5 times and kept getting stuck on that connection to printer page... i had to go into My Devices and forget that printer, turn off my PC, turn it back on, and power back on the printer. after that, my PC recognized the drivers and the printer.
@@matthewyoakum2108 I'll try it and let you know he really
@@matthewyoakum2108 this worked like a charm 👍
@@matthewyoakum2108 done this after a whole day of trying and it worked .. thanks bro
I did it on my pixma ip2770..though its an older type of printer..but your tutorial is very helping me to install and use it.🙏🙏thank you
Glad to help.
This video put me back in business, Very, Very Helpful. 👍
Great to hear!
@@MDTechVideos Great Video thanks for the help
Thanks sir. Finally i did it. Because of you. Very very thank u.
You're welcome!
Thank you for this lovely video your voice is crystal clear i followed the instructions its really helpful therefore i am subscribing you too....thanks
Thanks!
Thank you for this video. It really helped alot. Everything went smooth until the end. Im trying to connect through USB. First is says printer detected. Wait until the installation is complete. Then after a while it says printer not detected. I end up having to turn the power on the printer off then on again. Then it will go back to saying printer detected. Wait until installation is complete. It seems to be stuck in a loop. Any advice?
Hi Eddie I have the same issue did you figure it out
I am in same situation please help😓😔how did u installed it.........
In my screen it is showing 'the printer is detected please wait installation is completed' as a loop
Did y'all figure this out before I take this crap back?
Did anyone figure this out? Please help
Did anyone figure it out ? I have same issues here
Canon will not issue drivers for this model to support the Windows 10 operating system. The Windows 7 drivers should function in the Windows 10 environment with some limitations which are currently unknown to Canon.....Any Ideas?
Thank you for the video and to comments Fluffy Rabbit made in the replies, I’ve finally got my printer up and running.
Thank you 😊
Wonderful!
Love all your videos as they have helped me in the past. My latest problem is, I have a Canon Pixma MG4250 printer and it has been working great for years with NO problems, until recently. Something happen with using the scanner, usually it worked automatically, but recently when I press the scanner button, I get the message "configure scanner to PC" it no longer does it automatically. I can scan using the scan utility tray, but it will only scan one page in PDF, whereas before I could scan multiple pages within PDF. Any suggestions on how to fix this?
Might be an old video but still works. Cheers from NZ
Thanks so much for this video. I lucked out because my printer is a MG 2520 again thanks
Glad it helped
thanks for the video, i got stuck on that very last step, the installation program asks to connect and switch on the printer, I do so, hear the "bleap" from my Lenovo laptop and then...the installation program tells me it cannot detect the printer, any advice please?
Glad it helped
I always had this error that the printer cannot be detected.
have you solved that? Because I'm in the same problem here
same problem here..
@@lhynchan8699 i solved it. While it says that printer cannot be detected, go to settings > devices > printers and scanners
After that , click on canon mg2500 and remove device.
Then the printer will once installed back automatically. And you may be able to proceed the next step.
Fluffy Rabbit you practically saved my life you have no idea 🙏🏽🙏🏽
@@fluffyrabbit9562 Thanks a ton for putting this up. Saved me a lot of time.
Darnit..not working for me ..says my laptop is connected to my Mg2500 Pixma series printer but keeps saying driver not found after i follow all of the steps unfortunately ...lonnng siiigh 😕
Thank you so much! Works to my MG2510
Glad it helped
Thank you so much for guidence. Already installed Thank you 🙏🏽
Glad it helped
When installing make sure there isnt a "dead" driver on control panel. Simply go to control -> drivers and devices -> remove.
This is so you can get a clean install. Otherwise drivers may fail over and over.
You are gooooooooooood
Still confused my drivers say f
Driver unavailable I don't know what to do
@@jaydenabreu5011 no just right click on the printer and click on remove>then turn the printer off, unplug it, plugged it again, and turn it on that should solve the problem
Thanks my dude
Hi, my printer is not connected to the computer. Done downloading MP driver and Winwar. How to resolve this?
hey dude wanted to say thanks heaps really helped out with getting it all set up thank you very much
Glad I could help
Thank you buddy 😊 i don't have cd on my canon LBP6000 it's really great that i watch this
Glad I could help
This vedio really helped me installing my printer! Thankyou so much
very helpful and worked fantastically! thank you so much you have saved my life.
You're welcome!
Thx man, it's really helpful and it's workin fine❤️
Glad to hear that
Hey, md. it was awhile ago since you have posted this, but im trying to install the driver, and about 15 minutes in, it says printer not detected, so i turn it off, and turn it back, and then it detects it again, and about 5 minutes in, it shows the same message, and never ends up installing.
I truly appreciate it! Thank you sir!
You are very welcome
Canon no longer supports my pm250...can you recommend a reputable third party for the driver? Many thanks.
Hi, I am having issues when it comes to detecting my printer. All is plugged in correctly and printer is on and it will detect the printer but then within 5 minutes it will change to say no printer is detected and to check connections
Same
the owner of that video couldn't reply to this kind of issue, haha so disappointing
Should I use the disk that came with Canon pixma mg2522 printer? When I did it like you say it ended up saying no drivers were not installed. Yet on my Windows 7 older computer it worked. But I want it to go on my Windows 10 computer I just got.
I have a canon MP 140 and no drivers availble for win 10. Comment from Cannon :
"Canon will not issue drivers for this model to support the Windows 10 operating system." Thank you canon
Very helpful, straightforward, and clear!!! Thank you so much!
Thank you so much sir, you solved my problem in 7 minutes
Happy to help
Thanks a ton bro u saved my life today
Glad it helped
Que isso! Obrigada!!!! Vídeos como o seu salvam quem não sabe nada e está no aperto!
Adorei !!!
when the file run it say " this program cannot be used with the current operating system."
what should i do? 😭
Maybe the driver you downloaded is not compatible with the OS (operating system).
Same 😫 have you made it work ?
hi, i have a problem, i installed the drivers of windows 7 on windows 10 (Cause there aren't for w10) and I can only scan, i have no the option to print (sorry for bad englids)
im still at the step 3 where i need to connect the printer to laptop. but somehow even I already secure the connection, I still can't install the driver.
That's where I'm getting stuck too
try all of these. Turn off any antivirus installed. Update ur PC. Uninstall any previous printer drivers.
Can you help me mine always popping out no printer is detected even if it is connected
Yeah mine too. Can someone please help
thank you so much ...really helped A lot
You're welcome!
Hey i recently bought this printer,i did everything you said but when i get to detection of printer it says wait for installation and stays there,then it shows the start over thing again
It shows its detected as well
Sir how to download canon Xerox machine drivers and find the models??
My printer says that it's connected on step 3 and that the installation is finishing, then it says that it's not connected, even though it's still on and plugged in. Any advice or help please? Thanks in advance and have a golden day!
Thank you, its helpful. I recommend it.
You're welcome!
I have problem with mg2500 series. It cant print my page number and some footnote. And when i print some picture the botom area wont print more than half inch either. Any sugestion how to fix it..
You are rocking sir amazing
Keep watching
I do everything it shows, then on step 3 it asks to connect my printer to the computer so I do that. It detects the printer and says “the printer is detected. Please wait until installation is completed” and it just stays there. It doesn’t do anything, I left for half an hour and still stuck in the same screen
Hello, it keeps asking me to check if the printer is connected. I do then it connected after a little bit it tells me to check over and over again. I’m this close of giving up😩
Same boat
Same bloody story here
Same here, can someone can help us with this problem?
Thanks. I'll give it a try.
Glad to help.
Do you know what to do if the model I use is not on the list ?
I have a L11121E model
I could not get either driver set up to complete, I suggest removing as many usb connected devices to help connection.
YOUR SUGGESTION IS VERY USEFUL I CAN USE MY PRINTER NOW A BIG THANK YOU FOR YOUUUYY
You're welcome!
Thank you so much, this helped so much.
Glad it helped!
Still helpful ! thank you.
Glad it helped!
My PIXMA iP4600 is not compatible. :(
If you have to disc player you should included with the disc setup
my printer is canon mx860 and it doesnt accept more than windows 7. I have windows 10 what should I do?
When I run the setup, it says "failed to acquire information on the driver and software. Check network connection and try again"
I have downloaded the software from official cannon website as well as some other sites and they all say the same. I have tried running the setup on clean boot, tried your tutorial on Fix error please check your Network Connection in Win10, tried using a completely different internet connection, manually tried changing dns, disabled firewall, reset my router, uninstalled my antivirus, contact Nasa, jumped from a building, flew at the speed of light in the vacuum of space and the error still persists....please help!
SAME!!!! I need help quick
Oh I found a newer version of my installer, and it works!
Hello .... I found this video very very helpful and I was able to follow and download. However, no matter how many times I have tried and retried and switched off etc etc etc it will not complete the installation process. It gets to the point where it detects the printer and starts the installation but then after a fairly long period telling me that it is processing the installation then it says it is not detecting the printer has failed!! This has happened at least 20 times ......... what to do???????// Thankyou for any guidance yo can give me
This is exactly what mine is doing now. Did you figure out what the issue is? How he ended the video is where mine is stuck at saying it can't detect a connection.
@@jenniiilee oh yes. I haven't got it sorted yet. It is so frustrating. Iwas hoping that it might be because I was using my hotspot and not an actual wifi connection. I have wifi being installed tomorrow and will try again. But presumably you are using a wifi connection .. so we'll see. I will let you know.
@@katemchardy542 I'm not sure what I did but I did get it working eventually. Hope you get yours working!
im having this problem now, if you ever did fix this problem, how did you? im so frustrated rn please help:(
I'm having the same problem please help
This video was helpful 100%
You're welcome!
It’s literlally isen’t doing anything at the part you clicked cancel. i plugged and unplugged the printer but nothing happend. I have retried about 6 times now. I really need help
I'm trying to install my Canon printer, I got all the way to the last step, while I was waiting for completion it said completion was incomplete and went through the connection
25 minutes later, still being installed
its benn 4 hours for me -_-, how long did urs take
USA does not stock TS3160 as it's for another market
If you can kindly elaborate, I will try and assist.
Thanks for rendering help
PIXMA MP250 has been retired, what do i for drivers?
Thank you!
When I put run file it say this program cannot be used with the operating system, please help it says to find another program that is compatible.
Wait mine came with a CD,what do I do with the CD
Insert the MiniDisc in CD-Rom which is located at the side of the laptop and install it.
just break it and follow his instructions
😂😂
Thank you so much
You're most welcome
except mine failed at the last step. it connects to the printer and loads. printer makes noise. printer cannot be detected lol
Hi sir my printer is Canon g 2010 series the documents are scanned but did not save in file what is the problem and how to solve this problem pls tell us
When I type "mg" into the search bar, nothing happens or nothing pops up so I can't choose anything, why is that?
God plus you WINNERS! Thank you so much, it works Yeah!!!!!!!!
You're welcome!
Can i connect my printer without internet connection or not???
It have LBP-800 i nact find driver original from cannon site not work.
yeah its pretty strait forward and stuck on processing installation
tysm this helped so much!!!!!!!!!!!
Glad it helped
hello, i’m on a windows 10 pro and i’m not sure what to select when it asks for my operating system because there’s no option for windows 10 pro, what do i do?
64 bit windows smart ass . I came here because my printer not working right not because I don’t known how to do this
i tried this and its telling me printer not detected i need help
I get to the point where I downloaded the driver for downloaded and download the driver and when it's downloaded I go there and I click the folder open folder and it pulls up a little man this is for security and performance performance Windows 10 is in s mode runs Microsoft verified apps to get this app you'll need to switch out of s mode what do I do because it tells me it's not safe to switch out of s mode
Thank you so much!! Very helpful :)
You're welcome!
Thank you.
Glad it helped!
Bra mine can’t detect the printer right
Thanks. Worked.
You're welcome!
Thanks a million!!
Glad it helped!
Canon g 2010 ka kaise dowload hoga
Thanks for sharing.
Glad it helped
Thank you so much.
WHY I CAN'T FIND CANON PRINTER PIXMA TS207 PLEASE ANSWER I REALLY RESPONSE
I don't know why it says my cable is not connected when it is?
Hello what does it mean when it says retired?