15:29 thanks man. The fucker made you work for it a bit eh! What’s most amazing is that you didn’t swear once. Your definitely more disciplined than me for sure. Thanks for the video.
I have a 2019 Ram Rebel, I installed the same heavy duty springs as it was sagging in the rear, later added 2 inch spacers when I lifted the front 2 inches. Just replaced the springs with Ironman 4x4 coil springs, 2 inches longer then the stock Ram springs, the heavy duty spring is set for 1,100 lbs over stock. The truck sets a little higher then with out the 2 inch spacers. When I saw you putting in the 3 inch spacers with the heavy duty coil spring I thought it would really set high!
So if I'm not mistaken the axle will tilt forward some if you lift it because of the connections to the frame. does this cause vibrations if you do 3", and if so is there a fix to it?
15:29 thanks man. The fucker made you work for it a bit eh! What’s most amazing is that you didn’t swear once. Your definitely more disciplined than me for sure. Thanks for the video.
I have a 2019 Ram Rebel, I installed the same heavy duty springs as it was sagging in the rear, later added 2 inch spacers when I lifted the front 2 inches. Just replaced the springs with Ironman 4x4 coil springs, 2 inches longer then the stock Ram springs, the heavy duty spring is set for 1,100 lbs over stock. The truck sets a little higher then with out the 2 inch spacers. When I saw you putting in the 3 inch spacers with the heavy duty coil spring I thought it would really set high!
That is awesome I am in awe at this situation.
Agreed. Customer didn’t need the spacers. Springs alone would’ve given the truck a perfect rake. But nice job!
4:12 it looks like this is adding a lot of stress to the brake lines? Maybe we have to remove the brakes before doing this?
Those tufftruck springs are great. I have them on my 1500. You’ll need belatein shocks to counter the up travel. It will be bouncy as f if not.
So if I'm not mistaken the axle will tilt forward some if you lift it because of the connections to the frame. does this cause vibrations if you do 3", and if so is there a fix to it?
Do the spacers have to be welded to the rear end
Why didnt you just spread the pads ive cracked pistons prying calipers off.
dude wtf, don't let your caliper hang like that. your torturing your hose and one day it will split because of that.