Homemade TOMOS APN 6s ELECTRIC 5000W 72V /// FULL PROCESS
Вставка
- Опубліковано 9 бер 2024
- In this video, we convert the old Tomos from a gasoline engine to a new electric engine in cooperation with @UniorTools .
Tomos now goes up to 90 km/h! Enjoy!
Unior : uniortools.com/eng/category/0
.
Unboxing 7.000$ Tools: • UNBOXING 7000$ UNIOR T...
Part 1: • TOMOS APN 6 Conversion...
Part 2: • TOMOS APN 6s Conversio...
TEST : • TOMOS APN 6s ELECTRIC ...
.
My TikTok : / doctordsyoutube
My Instagram : / doctords_youtube
.
.
Photo equipment
-SONY A7III
-SONY 18-70
-SONY 18-200
-2x Nikon d3200
-Nikor 18-55
-DJI Ronin SC
-RODE
-RODE NT-USB
-GoPro 7 silver
.
Za poslovne upite: dadoskrbo16@gmail.com
For business inquiries : dadoskrbo16@gmail.com - Авто та транспорт
Sa alatom unior-majstor je i junior 😊 ! Odlično odrađen posao,sve pohvale!
Basically an extended Unior ad, this one.
Super projekt,samo ti moram reć jedan savjet.Kada si stavljao nove gume i zračnice na felne trebao si sa običnom izolir trakom zaštitit unutarnju dio felne zbog zračnice. Ide sub. i živio ti meni.
Perfect craftsmanship! Welding, laser cutting, sandblasting and painting! I would have liked to have had these opportunities 35 years ago! A warning would only be better when re-spoking the wheels! It's not as easy as you make it out to be :) All in all: A superbly crafted job! Chapeaux
Markus...have you ever respoked one or more? Balancing can take hours...I was up half the night once with a wheel kit like his...spoked and balanced by morning...I have another waiting to do my wheel rims are rusty again
Plasma cutting rather, not laser.
Looking good! Make sure to protect the battery. If someone jumps on the saddle and the glass fibre bends or breaks those screws can puncture the battery and cause a fire. Keep up the good work!
My opinion everything looks great on video! And most important it's how to made time for sponsors don't need to jumping in front
Big Respect for it
VERY satisfying video, a very PLEASANT watch, WELL DONE man!!!!
Pjeskarenje na otvorenom u Europskoj Sloveniji, svaka ti čast.
Now switch that fugly halogen front light with an led. Oh and add turn signal lights too. And brake light. you know, security fist!
Odličan rad,motorić super do posla i nazad za svaki dan a ne troši ništa!! Veliki pozdrav i bravo!🥂
Odgledao sam do kraja bez ubrzavanja, svaka ti čast.👍
The only thing missing is a protective cover for the chain. Otherwise excellent work. And there is one mistake and that is that the cables are routed through the chassis, they should have been protected with some rubber grommets to prevent a short circuit if the insulation is scratched.
Nice video and respect for all these skills.
Nice. Don't forget to mount the chain tension parts. This motor will certainly stretch the chain :)
Knowing how to do something and having the tools to do it are two different things ...Nice build 👏👏
Bravo , čestitam na projektu i kvaliteti rada . I sam bi volio imati sve to na svom APN 6 . U svakom slučaju drago mi je što si odabrao APN . Pozdrav iz Livna .
❤️
Bravo! Vrhunsko delo!❤❤❤
Świetna robota. Wspaniały!
Thank you for this video and your effort to make it. Keep up the good work 👏 this talent surprises me again -👍
Great work!!!
لقد استمتعت كثيراً بما شاهدت و اتمنى لك التوفيق الحقيقة شغل متعوب عليه وفي منتهى الترتيب والجودة تحيه لك من السعودية
Bogami super je to odradjeno !👋👍
Definitivamente si de algo estoy seguro es que ti eres el hombre y esta vida te necesita vivo y bien.idolo genio absoluto
First off, very nicely done, I have a few points though if I may? Boxing in the heat sink fins of that controller leads to reduced cooling efficiency... I do not know if you plan long trips but, I would suggest some cutouts on the opening sides of the fins of that angle iron bracket so that some of the warm air can be pushed out? The first and second rims, the spokes were not done correctly as the rims when spun were both pulled out of round, hope this was fixed otherwise that will cause a bouncing effect when riding the cycle. Other than that I can't really say much more as the video did not show the other concernes I did have so would not be conducive to add here.. Well done to yourself and the other students, a project well done!
Kreatif Good, peralatan yang komplit, ruang ruang kerja memadai semua sudah tersedia 👍👍
Can you please add a link where you purchased the complete electronic components and engine? Thanks
Great job👏
Great work sir you are awesome engineer 😊thanks for sharing this video sir
Proper job 👍
Creative video, thanks :)
you are a great man. go on!
Hola.cusnto tiempo tarda en llegar los repuestos?
the chain needs a tensioner, otherwise it wil damage your motor.
Awesome man
Super,vrlo profesionalno,svaka čast.A ovakva radionica,tko ju nebi poželio,vjerojatno vrijedi pravo malo bogatstvo.
La bateria es muy pequeña para ese vehículo, como mínimo debias de ponerle una bateria de 72v a 50ah par que tenga una autonomía decente.
Very very good job , nice
RIP TOMOS, je wordt gemist als een echte brommer
question 🙄
could we use two or three batteries, when the first one is discharged the second one is activated, and so for the third one,
fort recharging each one on the go by rolling,
so we dn't need to come back home to recharging ..
Cara ficou exelente
Awesome!
what about the millage from this tiny battery ?
Cool build! Say bye bye to balls if the battery burns.
If the battery burned you could get off the bike.
Yes fast 😂 @@Ijusthopeitsquick
Vratio mi sjecanja kad sam sarafio svojeg Apn-a. Svaka cast na projektu. Bateriju nije bilo moguce smjestiti u rezervorar?
Not too bad, great job!
Would be interesting to see how big you can go on the front sprocket before losing too much hillclimb ability...
Why is the front brake on the left?
Thx for the videos of this build!
👍👍👍
0:30 love the security, yep you all bright people alright 😂😂🤣🤣what's the point of a padlock when you can simply undo the nut 😂😂🤣🤣
Slovenian logic... no logic
How long did the conversion take?
Excellent
I would have put the battery in place of the former gastank for a better balance front to rear. But great job anyways!
Yep. Two batteries on both sides of frame.
top Schutzkleidung beim schweißen UV Schutz auch für deine Haut super Vorbildlich
Fantastično !!!
Exellent.
👍
Wow, very beautiful.
Bravo Respekt🤩
Svak Cast 👌
Super projekt.samo jaz bi naredil malo drugače vse skupaj. Kot najbolj pomembna stvar so zavore. Ta el.motor je zelo močan in zato bi jaz dal spredaj disk zavoro. Baterije nebi dajal pod sedež. Za baterijo bi porabil rezervar. sedež bi pustil original.ključavnico bi dal zraven števca pred števec.pri motorju kjer je zobnik bi predelal gor original pokrov,lepo bi izgledalo pa se zaščita bi bila,ter original tomos. Nikjer na videu nisem zasledil ,da bi dal čez luknje zaščitne gumice in kable skozi . Potem zadaj ni videt da bi dal kabel v kak požirek. Jaz bi se dal gor original napis APN 6 s E Drugač pa moram priznat ,da je celoten projekt dobro narejen. Če ta motor ni narejen za UNIOR , kar domnevam da je ,bi dal ta motor na a test ,homologaciji in bi ga registriral. Vozil bi ga seveda brez prikolice. Prikolico bi samo imel zraven za tomos srečanja in prireditve.
zakaj razkrivas poslovne ideje? naredi in prodaj!!!! vsak izgovor je pa dobr zakaj ne ;)
Superb
Svaka cast
and idk if putting battery under your seat is a good idea,
Maybe he dont want children
exellent awsome
Superb.................
It looks it was almost brand new before the conversion.?
Gde će ti duša da stavljaš umesto normalne mašine električnu
Perfect, but if u put the battery in fuel tank and maked it more than 20 AH for that 👍💪
What was the total cost of the whole rebuild, not including labour cost. Euro price if possible
Cuando usted compra algo por aliexpress cuando demora. El Envio?
Nice project, but combustion engine is stil the king. It could be original 49cc with turbo :)
Super izvedba in video. Čestitam. Mogoče ena ideja za naprej: predelati motokultivator GOLDONI diesel 9kW v električnega. Kaj pravite?
Bravo majster, odlično opravljeno. V prihodnosti pa še led luči "mod" manjka. =) Čestitam.
Muy bueno !!!!
Super !
démontage assuré dans 6 mois.. pas de graisse sur les axes, les pièces mobiles des freins, etc, pas de protection sur les câbles passant dans les trous métalliques.. risque de court-circuit et de prendre feu.. un joli bbq ambulant. Mais hormis cela, joli projet.
التكنولوجيا خلقت لك انت ❤
Whats the discharge of the battery, bms rating?,, your power leads are very small,,, deffo not pumping enough power for the fardriver and qs 165
Olá! Projeto ficou bom. Poderia ter montado a bateria no lugar do tanque de combustível. like
good job
bonjour, j'aimerais savoir ou avez vous eu l'ensemble électrique? merci
Super video🤙🤙,kako si riješio titlove😃,Pozdrav🙋♂️
It looked a nice little machine before chopping it up and welding great lumps of steel to it. I'd stick with the petrol engine. I'm weird like that. Otherwise a nice refurbishment job.
with 5000 watts it will be possible approach 105 to 110 km/h ?
Bravo :)
what will you do with the bike engine?
Super👍👍
Why did you destroy the tank? It could serve as a container for vodka!
najbolji si
On testdrive the wheels losiing the shiny crome ?
Super video, neznam ko je proizvodio tomos motore?
WOW(ว๊าว)😀งานดี🇹🇭(Good job)
Battery in the motor controller place and the motor controller under the seat
perfect
Got any videos of it catching fire?
Tek kelimeyle muhteşem yanımda senin gibi bir arkadaşım olmasını ister din👍
Recife. Adorei saber
Jel imaš link od motora gdi si ga kupio? Odličan projekt.
Details about the conversation kit?
My idea is to make kidse- quad . Maybe smaller e motor for young 6 year old driver.
I like and I adore
Jao, taj konektor iz baterije... Ostalo je super.
@Doctor D.S
Gdje si nabavio kuku za motor, dal je to obicna kuka kao za auto ili?
Da, obična kuka 50mm, ima ih za kupit u autodijelovima i poljodijelovima.
te falto ponerle las piezas para ajustar la rueda cuando la cadena se estire