Note: these instructions are for initial programming only. To change the code from an existing code open the video description he posted. On the UA-cam app click on the bold “more” word. Then click on the blue words which is a link to the original manual and follow the instructions for changing an existing code. It’s much simpler.
Thank you for the video. Yours was most helpful and thank you for the link for which number to use cuz my learn button is yellow and I had no idea which one to use.
I followed your instructions, but now whatever keys I hit my garage door will still open... It does not seem right. Any suggestions in this case? Thanks
You have to know what brand of opener you have and color of the learn button if it is a Chamberlain branded opener. Just to make sure, here is the correct manual for the keypad. embed.widencdn.net/pdf/plus/cgi/tztinczpqb/114a3484.pdf?u=mcyivk
Thanks! Finally got mine working after I observed you not waiting for the backlites to go out between steps 4 & 5. Step 3 tells us to wait for them to go out, so i waited after step 4 too and it would not work.
Thanks for this. I've been trying to match my clicker to our brand new Lift Master Elite series using this method... but without any success. Am I missing something?
The only thing I would say is make sure that you have the correct programming number for the keypad which for your opener should be 8. Otherwise, the keypad may be too old and not support the new LiftMaster garage door openers although that is probably not the case. Hope this helps, Alex.
Good morning, I recently moved to my new place and we have one of them garage thing that you have. What if you dn't know that # and dn't have a manual?
Good morning, I have a link for the manual for the keypad in the description of the video. If you are looking for the manual for the actual garage door opener unit, you have to find the model number of the opener and look online.
Thank you, clear video. However my Overhead Door (aka Genie) with a learn button #5 doesn't seem to work. Other videos says you have to hit zero twice after entering it during the 'learn' phase (I did that). So, I'm doing this while the clicker is attached to the wall outside. Does it have to be really close like you have it? Thank you.
Hey Joseph, try to set up your keypad using the code # 6 and see if that works. Otherwise, you could try moving the keypad closer to the garage door opener or replacing the battery.
@@InsideAlexsToolbox Thank you sir...that worked! "6#" and not 5#. I was SURE that was correct...thanks for having me try that. You just saved the owners of this place some bucks for a new opener. :)
@@InsideAlexsToolbox thank you so much, i have been fighting this for the last 2 hours and you resolved it so quickly. i should of posted my question earlier. much appreciated.
Marc, I have never seen or heard of that happening before, I will ask some of the other people of the garage door community to see if they know what the problem is. My first guess is something has gone wrong with the keypad and it will need to be replaced. I will let you know what I find out. -Alex
My learn code button is yellow, so the ID code is 8. I have been trying to reset the code, I go and hold the # & * key until the flashing stops, I enter a 4-digit code, hit the # key, press 8, hit the # key, press the learn code button, put in my 4-digit code & press 0, nothing happens. Edit: Changed the battery & this method worked! Thanks!!
I watched other videos and couldn't figure out how to program from their instructions. Your video helped me program it. Thank you!
Thanks! I've tried to watch several videos to get this to work and this is the only one that helped me. Very easy to follow and thanks for the link.
Thank god!’ Been looking at differ videos for 1.5 hours trying to figure this out. Thank you for posting the link , that made it work finally
Dude!!! You are the BEST of ALL the BEST!!! You laid this instruction video out and made it idiot proof! Kudos!!! Thank you!!!
Thanks, my learn button was purple 03 . I saved a lot of time!
Thank you-- your gift keeps giving! Your video is thorough and first rate!💯
Thanks a ton. I had looked at few other videos and those were not as instructive as this one. Thanks for the link as well.
Great video I could not have done it without you. Love and Respect from Canada 🇨🇦.
Thank you for including the link to the manual! Yours is the clearest set of UA-cam video instructions.
Note: these instructions are for initial programming only. To change the code from an existing code open the video description he posted. On the UA-cam app click on the bold “more” word. Then click on the blue words which is a link to the original manual and follow the instructions for changing an existing code. It’s much simpler.
Thanks! You made it super clear and easy to do this.
That Coast Guard Lego ship on the shelf is epic
Thank you for the video. Yours was most helpful and thank you for the link for which number to use cuz my learn button is yellow and I had no idea which one to use.
Awesome!! Worked like a charm. Really appreciate the help 🌟
My smart learn button looks Brown and it's not matching anything on the paper that came with the opener
This is awesome
Worked for Me but how do I close the door?
Thank you for this very helpful video and the manufacturer data.
Thanks!! Worked for moms house!!
Thanks pro actually you are the only one whom explain very well
how do I change the pin #. I had several workers in my house and they had to key code. ?
Thanks. Purple button learn is 3 for life!
Great Video Alex and thank you so much, it’s much appreciated 🙏
What do you do when your garage door is closed and no service door to get inside? How then do I get my keypad to open it since it stopped working
Yeah like if the battery goes dead and it can't work. I guess I need to keep a spare battery and screwdriver in my car?
I followed your instructions, but now whatever keys I hit my garage door will still open... It does not seem right. Any suggestions in this case? Thanks
This video was a big help!!
Thank You for your Excellent Support. Very good video.
Where do I get the ID numbers? I do not have the instruccions I downloaded manual from website but it doesn’t shows my model.
You have to know what brand of opener you have and color of the learn button if it is a Chamberlain branded opener. Just to make sure, here is the correct manual for the keypad. embed.widencdn.net/pdf/plus/cgi/tztinczpqb/114a3484.pdf?u=mcyivk
Thanks! Finally got mine working after I observed you not waiting for the backlites to go out between steps 4 & 5. Step 3 tells us to wait for them to go out, so i waited after step 4 too and it would not work.
Where did you find the id numbers? I don't see them anywhere.
But .in my case it stopped working i replace the battery. No effect. Just refresh signal keep same number. I can't find id number for keypad
Thanks for this. I've been trying to match my clicker to our brand new Lift Master Elite series using this method... but without any success. Am I missing something?
The only thing I would say is make sure that you have the correct programming number for the keypad which for your opener should be 8. Otherwise, the keypad may be too old and not support the new LiftMaster garage door openers although that is probably not the case. Hope this helps, Alex.
I cant find the description button for the link... i have a purple button
purple is number 3
How do I find the ID???
How do I do it for a purple button
Thank you so much! Worked perfectly.
Super clear! Thanks!!
Good morning,
I recently moved to my new place and we have one of them garage thing that you have. What if you dn't know that # and dn't have a manual?
Good morning, I have a link for the manual for the keypad in the description of the video. If you are looking for the manual for the actual garage door opener unit, you have to find the model number of the opener and look online.
Thank you, clear video. However my Overhead Door (aka Genie) with a learn button #5 doesn't seem to work. Other videos says you have to hit zero twice after entering it during the 'learn' phase (I did that). So, I'm doing this while the clicker is attached to the wall outside. Does it have to be really close like you have it? Thank you.
I'm brand new to the place with this set up...upon closer inspection, the Overhead Door model is a Python 2 Series OCG with "Code dodger"
Hey Joseph, try to set up your keypad using the code # 6 and see if that works. Otherwise, you could try moving the keypad closer to the garage door opener or replacing the battery.
@@InsideAlexsToolbox Thank you, I'll give that a try.
@@InsideAlexsToolbox Thank you sir...that worked! "6#" and not 5#. I was SURE that was correct...thanks for having me try that. You just saved the owners of this place some bucks for a new opener. :)
Hey where's the link ???
After I input my new code the lights on the lift master do not blink and I do not hear a clicking sound. I don’t know what i’m doing wrong
Make sure you are using the correct code on the keypad for your learn button color.
You saved my weekend!
Thank you so much you saved the day. One more like.
If it is
Urple what is the color number?
You would use code number three.
Anyone know if this specific keypad “locks out” after a certain amount of unsuccessful attempts to open the door?
Yep it sure does
my overhead door opener has a black button for the learn. how do i find what code to use. thank you..
For your opener, you would use code number 6 when setting up your keypad. Hope this helps.
@@InsideAlexsToolbox thank you so much, i have been fighting this for the last 2 hours and you resolved it so quickly. i should of posted my question earlier. much appreciated.
Where do I find the manual
embed.widencdn.net/pdf/plus/cgi/tztinczpqb/114a3484.pdf?u=mcyivk
I got my keypad working but it works with any code regardless of the pin code I set up. Don't know what I am doing wrong.
Marc, I have never seen or heard of that happening before, I will ask some of the other people of the garage door community to see if they know what the problem is. My first guess is something has gone wrong with the keypad and it will need to be replaced. I will let you know what I find out. -Alex
So helpful, thank you!
Can you program a second garage door opener with this clicker keypad?
I do not believe that you can. I wish though!
For the opener ids it just has a list It doesn't show any id.It has a list 1 to 9. So is the id the number?
Those numbers and the id's that you need to program to the opener.
@@InsideAlexsToolbox All I see are the numbers 1 to 9. Where is the id numbers?
@@cooldog60 My bad. Spelling mistype, the numbers 1 to 9 are the ID numbers that you need to program.
@@InsideAlexsToolbox Ok Thanks. So the color on mine is yellow it is number 9. So 9 is my id?
@@cooldog60 Yes, that will be your ID number. Follow my same instructions except using 9 as your ID number.
Perfect! Thank you!!
My learn code button is yellow, so the ID code is 8. I have been trying to reset the code, I go and hold the # & * key until the flashing stops, I enter a 4-digit code, hit the # key, press 8, hit the # key, press the learn code button, put in my 4-digit code & press 0, nothing happens.
Edit: Changed the battery & this method worked! Thanks!!
My light won't even go out on clicker key pad when pushing star and pound now,I've tried so many times ?
You ROCK !!!! Thank you.
Thank you so much god bless you helped a lot
Thanks you sir! Simple instructions ever.
I have a purple learn button and have been using the code number three but it won’t accept my garage code any tips?
So me did you find your ID ?
I got the same purple learn button and it won’t accept my garage code either 🥲
What’s the name of the music
ua-cam.com/video/g2HzEvU1roY/v-deo.html
Good looking out..
This guys the best
What opener is this?
2575
You are THE BEST thank you!
Thanks for the info
Thank you brother!
Thank you so much!
3 worked for me
Thanks, nice video
Thank you it worked the first time. Whew!
Very very helpful
Perfect thanks!
Excellent
Merci 🤩
This was great, thanks!
You need a communication course
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thank you!
My learn button is grey.
Thank you
Thanks!!
Lol hi Alex I’m on a new channel
Bro got same thing
i am an 8 yellow
Thanks alot
Great Video! Thanks a million!
Thank you so much!
thank you!
Thank you
Thank you 🙏
Thank you!!
Thank you
Thank you.