It's really easy to reprogram your unit: Step 1. Hold down the (*) and the (#) keys until the keypad stops flashing. Step 2. Determine your opener ID using the list below: *1= linear garage door openers manufactured from 1997 to present. *2= Chamberlin, Sears, Craftsman, LiftMaster, Master Mechanic and Do it garage door openers manufactured from 1997 to 2004 ( Orange learn Button) *3= Same as *2 above, but manufactured from 2005 to present with a (Purple learn Button) *4= Same as *2 above, but manufactured from 1993 to 1996 with a (Green learn Button) *5= Genie Intellicode and Overhead Door garage door openers manufactured from 2005 to present (315 MHz). *6= Same as *5 above but manufactured from 1995 to present (390 MHz). *7= Stanley garage door openers manufactured in 1998 to present. *9= Wayne Dalton garage door openers manufactured in 1999 to present. Openers with learn Buttons Programming: Enter the PIN that you want to use, remember (4) digits only. then press # Enter ID # from list above, for example 2 then # Press and release the Learn button on your garage door opener. Enter your (4) digit PIN and press (0), for Genie and Overhead door units press (0) twice. To test and use wait for light to go out on keypad, Enter you PIN and press (0). Note: If opener doesn't function repeat programming.
@nrred was it a genie intellicode? Because for mine the learn button was in the light casing it was on the left a small black button over a little red light
IF IT ISNT WORKING, THEN YOU PROBABLY HAVE A DIFFERENT TYPE. I had type 3 and there are certain instructions for each type so don’t give up yet and go to the link in his bio. This video was also very helpful so make sure to watch it
Very Nice! Thanks for a concise and complete how-to. In the instructions I wondered about the second "0"-- "cuz it's a genie" --I tried it with and without the second "0" and my "Overhead" brand opener worked ONLY with the second "0". Thanks, Joshua.
what do you do if your garage door opener doesn't have a learn button. Its an old stanley professional that uses only dipswitches. I tried to change my code but messed up and can't figure out what code i changed it to.
Carla Gavilanez Yea, he doesn’t explain anything about the “0’s”...he says, “0 twice because it’s a genie”...ummm, ok well the beginning of this video says NOTHING about hitting 0 for a Genie nor any of the others, soooooo wtf..? I’ll see if I can figure out what he’s missing and post it ASAP🤙🏼
I missed the first part of this video guy that's why I wrote this, Good video dude but you forgot to tell people why you hit 6, you just said 6 because this is a genie. Well that being said i didn't know what you were talking about but I don't have a genie so your system did not work for me, the number six that is. I had to go to another video that said you need your ID code for your system and come to find out it goes by years made, not by being a genie. So I went to gsoverheadsystems.com and found the id code for my system which was 2 and everything worked following your instructions just me adding a 2 instead of 6 made my day! thanks again dude, i would just clarify the id code you used and your video is great. Maybe other people will catch on like i did eventually because I never messed with garage door openers before.
It's really easy to reprogram your unit:
Step 1. Hold down the (*) and the (#) keys until the keypad stops flashing.
Step 2. Determine your opener ID using the list below:
*1= linear garage door openers manufactured from 1997 to
present.
*2= Chamberlin, Sears, Craftsman, LiftMaster, Master
Mechanic and Do it garage door openers manufactured from
1997 to 2004 ( Orange learn Button)
*3= Same as *2 above, but manufactured from 2005 to present
with a (Purple learn Button)
*4= Same as *2 above, but manufactured from 1993 to 1996
with a (Green learn Button)
*5= Genie Intellicode and Overhead Door garage door openers
manufactured from 2005 to present (315 MHz).
*6= Same as *5 above but manufactured from 1995 to present
(390 MHz).
*7= Stanley garage door openers manufactured in 1998 to
present.
*9= Wayne Dalton garage door openers manufactured
in 1999 to present.
Openers with learn Buttons
Programming: Enter the PIN that you want to use, remember
(4) digits only. then press #
Enter ID # from list above, for example 2 then #
Press and release the Learn button on your
garage door opener.
Enter your (4) digit PIN and press (0),
for Genie and Overhead door units press
(0) twice. To test and use wait for light to go out
on keypad, Enter you PIN and press (0).
Note: If opener doesn't function repeat programming.
I have a Genie unit. Was here when I moved in. I have no Learn button. Any ideas?
@nrred was it a genie intellicode? Because for mine the learn button was in the light casing it was on the left a small black button over a little red light
All these years later and this was still the quickest and easiest video to follow to reset the garage keypad on the home I just purchased. Thanks!
Glad it helped! Thanks for taking the time to comment!
Thank you!!!! I've been trying to resolve this for 10 minutes then found your video
Glad I could help!
Once I figured out the right number for my garage, worked like a charm. Thank you!!
How did you figure out the code for your garage door?
Your video was the 2nd video and I got it on the first try, thanks homie appreciate
IF IT ISNT WORKING, THEN YOU PROBABLY HAVE A DIFFERENT TYPE. I had type 3 and there are certain instructions for each type so don’t give up yet and go to the link in his bio. This video was also very helpful so make sure to watch it
How to program with no learn button
very easy to understand AND complete
Thanks for liking!
Thank you. Method worked flawlessly
Great to hear!
You are a lifesaver! No other guides I found online worked for my Genie garage door opener. Thanks again.
Thank you very much. Easy to understand your instructions, it worked right away.
I can't seem to get mine to work? I have a #2 garage door opener?
Thank you so much man!! Saved me a ton of time!!
I can't find the first part of the video where he tells you how to find your garage door opener code.
Thank you! It worked for me! I saved some money doing it myself
Glad it helped
Thanks for the video. It worked for us.
I have a liftmaster 2017 with yellow button ( no orange, no purple, no green) but anyway I tried with 2,3,and 4 . It didn’t work 😩😩😩
Very Nice! Thanks for a concise and complete how-to. In the instructions I wondered about the second "0"-- "cuz it's a genie" --I tried it with and without the second "0" and my "Overhead" brand opener worked ONLY with the second "0". Thanks, Joshua.
Thank you
what do you do if your garage door opener doesn't have a learn button. Its an old stanley professional that uses only dipswitches.
I tried to change my code but messed up and can't figure out what code i changed it to.
Genie and Overhead are the only manufacturers you hit zero twice for. The rest in this category you only hit zero once.
ua-cam.com/video/c_5jj-UBKA4/v-deo.html
how do change the pin number on all the remotes and the main unit
All of this worked very well, thank you. But now, how do I set the new code?
DLPE HCTX it’s all on the video! :)
Thank you for the codes.
You are a lifesaver!
Thank you so much! This worked perfectly
How many zeros do you use if it’s not a genie? I have a craftsman. Thank you
Did you find out what to do for a Craftsman? Mine didn't work either.
Nope 😂🤷♀️ still over here locked out! If anyone ever finds out I’m over here waiting in eager anticipation
Carla Gavilanez Yea, he doesn’t explain anything about the “0’s”...he says, “0 twice because it’s a genie”...ummm, ok well the beginning of this video says NOTHING about hitting 0 for a Genie nor any of the others, soooooo wtf..?
I’ll see if I can figure out what he’s missing and post it ASAP🤙🏼
The link in his bio explains the instructions for each type
Very helpful, thanks for posting! Used it!
Thanks brother 🙏 💙 ❤️ 🙌
It worked 🙏
This was helpful, thanks
It worked! Thanks heaps pal!
Thanks for the video!
you are my savior
leif H glad I could help!
what is the code for a liftmaster
Yay it worked, thank you
I missed the first part of this video guy that's why I wrote this, Good video dude but you forgot to tell people why you hit 6, you just said 6 because this is a genie. Well that being said i didn't know what you were talking about but I don't have a genie so your system did not work for me, the number six that is. I had to go to another video that said you need your ID code for your system and come to find out it goes by years made, not by being a genie. So I went to gsoverheadsystems.com and found the id code for my system which was 2 and everything worked following your instructions just me adding a 2 instead of 6 made my day! thanks again dude, i would just clarify the id code you used and your video is great. Maybe other people will catch on like i did eventually because I never messed with garage door openers before.
so helpful thank you so much!
Thank you!
orange lights and can't reset the pin 😪 this is a tragedy
anyone have any insight on this?
So helpful. Really appreciate it!
Thank you so much
Lifesaver
🙏 u r awesome!
Thank you! The website didn't help for s**t.
Thank You!!!
thanks !
ty
You Rock
Golden Freddy9000 why thank you
yes! Thank you.