Sweet. I'm doing the same. 2018 Lariat 3.5 Ecoboost. I got mine for 10k here at Copart. Have the ADV glass coming in next week and have almost everything else from Tasca. My build will run around 25k as well with engine mods and some 37s
Just happened to run in to your channel. Very impressed with what you’ve done. I didn’t know it’s possible to build the stock into the beast, lol. I’ll build one. Thanks for the video and inspiration
Paint looks great!!! Man the did a great job on the fiberglass. Black is also the hardest color to paint so money well spent. Usually it would be wavy and have a lot or orange peel. If you wanna keep it prestine look into PFF and see if anyone is will to sponsor go help out because its expensive as well but will keep the paint nice.
Thanks adewale! Yea the painted said to wait a month before I have the entire truck wheeled out to really dial in the paint. Then looking into PPF for the front pieces to keep from rock chips.
Hah thanks man, yea I wanted it painted and complete before I wrap it something satin. That’s next. Knowing it was not painted underneath would have bothered me.
So the front has the same stance ie. width and height as a raptor. The rear with the leafs and Springs has the same height but not the same width? Or am I mistaken and your truck has the same stance as a raptor?
You are correct, the front is raptor spec but with -38mm offset wheels to account for added fender width. The rear is f150 spec, with 2” spacer and -38mm offset wheels. Going to be sourcing a Raptor read end soon to Solve the issue.
Hey man just subscribed. Your videos are awesome and I love what you did with the truck. Was wondering if maybe I could email you with some questions I have about doing a similar build with mine. Thanks and keep up the good work!
Rides great, the stock ride wasn’t bad honestly. Truck definitely absorbs potholes and train tracks better. I am installing eibach springs soon so I’ll have an update.
Omg dude this looks so good! This is so motivating to do on my F150. Great content!
Thanks man! It’s a fun build if you have the time and effort.
Great video Edmon. The truck looks great!
Thanks!
Cleeeeean! I just got me a 2015 for 8k in near perfect condition. 8k plus my old sxs. I need this set up.
Sweet. I'm doing the same. 2018 Lariat 3.5 Ecoboost. I got mine for 10k here at Copart. Have the ADV glass coming in next week and have almost everything else from Tasca. My build will run around 25k as well with engine mods and some 37s
Awesome, it’s a fun build if you can put the time in. Go back and check out the rest of the vids if you have any questions feel free to ask.
You haven’t mentioned about the gas cap or the fuel line length for the wide body back panel
New video this week covers these items! thank you
Just happened to run in to your channel. Very impressed with what you’ve done. I didn’t know it’s possible to build the stock into the beast, lol. I’ll build one. Thanks for the video and inspiration
Thanks for watching and hope the videos helped! Definitely possible and save some cash if you can do the work yourself.
Turned out dope dude! I want to do the exact same thing to mine!
Mad respect bro
Just wow.. i watched all ur video from nothing to the badass raptor u built
Enjoy riding beast!
Appreciate the support man! I’m glad you enjoyed the videos! Thank you, more to come.
Paint looks great!!! Man the did a great job on the fiberglass. Black is also the hardest color to paint so money well spent. Usually it would be wavy and have a lot or orange peel. If you wanna keep it prestine look into PFF and see if anyone is will to sponsor go help out because its expensive as well but will keep the paint nice.
Thanks adewale! Yea the painted said to wait a month before I have the entire truck wheeled out to really dial in the paint. Then looking into PPF for the front pieces to keep from rock chips.
coming along real nice man!
Thanks! How’s yours coming along?
Love when you pull up and snow is resting on the flare👍
Did you consider vinyl wrap over painting?
Hah thanks man, yea I wanted it painted and complete before I wrap it something satin. That’s next. Knowing it was not painted underneath would have bothered me.
Rear view mirrors, bumpers and grill should of gotten color matched so it flows. All in all good stuff man.
Always a work in progress, thank you! check the latest video
looks sick thinking about doing the same project
Thanks! It’s a fun project if you don’t mind putting in the wrench time.
Where did you buy the tailgate for $500? I want to get one for my 2018 xlt conversion but I can’t find any under 2k
Probably on Facebook marketplace or Craigslist
Don’t know what state your in but some tint would definitely change it up clean! I wanna do this soon
Michigan, it’s in the works along with a fresh windshield. Thank you 🙏🏼
Is it wider than a stock raptor? I’d love to see a side by side comparison video.
Great idea! A friend on my street has a stock black gen2, I will see if he’s down to do something like that. 👍🏼👍🏼
@@EdmonJiddou is it wider? I can’t find comparison pics online.
Looks slick
So the front has the same stance ie. width and height as a raptor. The rear with the leafs and Springs has the same height but not the same width? Or am I mistaken and your truck has the same stance as a raptor?
You are correct, the front is raptor spec but with -38mm offset wheels to account for added fender width.
The rear is f150 spec, with 2” spacer and -38mm offset wheels.
Going to be sourcing a Raptor read end soon to Solve the issue.
Hey man a little late but if you haven’t already I would 5.0 swap it maybe supercharge it too
Hey man just subscribed. Your videos are awesome and I love what you did with the truck. Was wondering if maybe I could email you with some questions I have about doing a similar build with mine. Thanks and keep up the good work!
Thanks man! Absolutely. I recommend joining the raptor swap pages on fb for a lot of helpful info. Ejiddou@gmail.comb
How is the ride with Raptor shocks?
Rides great, the stock ride wasn’t bad honestly. Truck definitely absorbs potholes and train tracks better. I am installing eibach springs soon so I’ll have an update.
Look like a real raptor
Thanks for watching man, latest video has a new bumper and intercooler mod.
Why not use OEM panels they are much cheaper than the fiberglass
My last build used OEM panels, I wanted this one to be wider than OEM if I was going through all the trouble.
@@EdmonJiddou oh ok, thought there might have been a fitment issue. I’m buying my parts now to do the swap
Nice job
Why would I subscribe you stopped uploading
got my 18 f150 sport 3 months ago with 60k miles for 38k😂
Truck prices are through the roof! You doing a conversion?
@@EdmonJiddou not on youtube but yes
Looks good but I'm into matte black. Am I alone in that's?
I love matte finish as well, I wanted solid paint underneath but I might wrap it this summer. Thanks!