Can’t remember the last time I watched an entire 23 minute video. I watched from start to finish. Good video. Gave me the antenna idea. Literally ordering right now as I watch from Amazon. lol.
That works great until you need to tow something and spend 2 hours trouble shooting why your lights on the trailer don't work. Not that I learned this the hard way.
I installed a 4D TECH Start/Stop Eliminator on my 2020 F-150 5.0L today. Turn key to "ACC", plug the unit into the OBD-II port, start the truck, and the "A" button reads, "OFF" every time. No more engine shutdowns at stop lights. I love it!
I just bought my first truck, a 2017 ford f 150 xl, this video helped allot with some ideas. For me so fat I've put in led interior lights, then a gas cap sticker, and a talgaite sticker. Thanks for the awesome ideas! hopefully my truck will look as nice as this one someday!!! Thanks!!!!
Great video bro! Love seeing everything that you've done with your truck! You gave me a few ideas as well. Love the white and black. Reminds me of my old truck.
Great looking truck, love the storm trooper look. I suggest you give Forscan a try. You could of disabled auto start/stop from the truck’s ECM. Also disable hyper flash on your tail lights and a bunch of other mods. UA-cam it bru, you will love it.
I installed the SeaLight led high, low, and fogs. I also installed switchback led turn signals. They are a amber turn signal but the switch to a day time running light when the turn signal cancels. They really add to the amount of light at the front of the truck.
Thanks for the love!! Yeah I think I’m total, the upgrades were close to $3,500. I didn’t do them all at once. This is over the course of a year 👍🏼 Progress, little by little.
Plasti-dip is great stuff. I did my badges and rims on my '09 and it turned out nice. Just bought a '14 FX4 5.0 that'll be getting that treatment, this week.
Sorry, too lazy to read through the comments to see if this has already been said, but: Doesn't that LED light bar on the front bumper interfere/restrict the airflow to the intercooler? (I have an EcoBoost and was under the impression that should be an open airway for the most part)
Catch can is a great mod but it has more to do with direct injection than the turbos. The valves get gummed up otherwise and keeping the turbos cleaner is just a bonus.
Great upgrades and they seem somewhat simple to do. I don’t have an F150 yet but already have my eye on a 2017. More videos like this one would be great.
@@MagargeeFilms it would be great to see top 5 things you like about your truck/ top 5 things you don’t like. Also what are the next mods you have in mind? Talk about how’s fuel consumption?
Thanks for the video. New subscriber. Picked up my 2023 a month ago. Installed an s&b intake, mbrp exhaust and did the cheap vta blow off mod lol. Also added illuminated door sils, interior lighting, underglow and a few others from f150 leds. I really enjoy seeing what others do for their builds. Thanks again
With the tail lights/blinkers, you need to splice in a resistor to the new LED lights. LED's consume a lot less power so they flicker twice as fast when you don't have a resistor wired in. I've done it several times. RIP Ken Block
You’re absolutely right! I got new taillights a while ago that came with built in resistors. Check out the video. ua-cam.com/video/aFEnUKz9FKo/v-deo.html RIP Ken Block ❤️
Good video. I have been told by some mechanics that if you have 2020 or newer you don't need a catch-can because they fixed the issue. The start/stop, you just need to unplug it under the steering wheel and that will prevent the truck from auto-turning off.
Thank you! I have the retractable sun shade in all my vehicles! Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_CRNVMZCTBJXVDSCMA2HS
@@andrewvalenzano3257 I have the retractable sun shade in all my vehicles! Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_CRNVMZCTBJXVDSCMA2HS
If you undo the clips for the inner fender and pull it back using a tie down strap, you can sit on the ground with your back against the tire and 'easily' replace the bulbs and dust covers. I found this far easier than laying on the ground and going straight up behind the bumper.
You’ve got a nice looking truck. It seems like you spent a lot of time on it. Do you have a video on how you plastidipped your emblems. I’ve attempted it before but did not come out as clean as yours.
Thanks for the love! No I have not made a video yet but would like to make one soon! The key is apply the next layer before the previous one has completely dried. That way they bond together. And when you peel it off, make sure the plasti dip is 100% dry and tear away from the emblem (down, up, or to the side). If you pull straight towards you, you’re more likely to pull the PD off the emblem
Be sure the check whether you have a trim on your fender or not Teccom Mud Flaps Splash Guards for 2015-2019 Ford F150 2015-2019 with Wheel Lip Molding Front and Rear 4psc Set ABS Molded www.amazon.com/dp/B07Z1K1RJ6/ref=cm_sw_r_cp_apip_IFHKqBlpERDUd
I did not install a resistor and that’s why the blinker flashed double time with the LED. So I left the turn/brake light with the stock halogen bulb and only put the LED for the reverse. If you want to use the LED bulb for brake and turn, you’d probably need the resistor Yorkim 3157 LED Light Bulbs White Super Bright, 3056 3156 3156A 3057 4057 3157 4157 T25 LED Bulbs for Brake Lights, Backup Reverse Lights， Reverse Tail Lights - Pack of 10 www.amazon.com/dp/B01A4Z3FOS/ref=cm_sw_r_cp_api_glt_fabc_T8SY6GX38TGNGX24DZRV?_encoding=UTF8&psc=1
Thanks for the love!! Yeah heres a link www.amazon.com/Cruiser-Accessories-58150-Matte-License/dp/B073SQ9B2T/ref=sr_1_6?dchild=1&keywords=black+license+plate+frames+industrial&qid=1615331926&sr=8-6
I don’t yet. I basically spliced in the positive to the running lights and then grounded the negative. Secured the Amber lights to the grill with zip ties.
Truck looks good! One question, you said yours was a 2x4 not a 4x4, but it looks like you have a 2h 4h switch, did you change out the coin holder to that or is it something else? Thanks
Thanks! So it actually came with that knob. It’s looks like the 4h 2h knob but it controls the diff-locker only. On the 4x4s, you turn the knob to change the drive and pull the knob out to turn on the diff-locker. But with the 2wd, it just turns to activate the diff-locker.
So it really depends on how much height your putting on your truck. And if your doing a suspension or a body lift. Both change the Center of Gravity which is why ppl say it affects the steering but the suspension has a bigger effect than just a regular body lift cuz you normally just do about a 2" lift. Thats why suspension lift is more expensive cuz more modifications have to be done to multiple parts over the basic body/ lvl lift kits
You should add these: - rwd rear shocks (Rancho or Eibach) - proper rwd coilover leveling kit (Eibach or Elka) - sway bar (less body roll) - upgraded brake rotors - painted brake calipers - cold air intake - exhaust - body color mirror caps - bed cover - center armrest cover - painted air vent trim and paint correction detail (remove those swirl marks, maybe add a ceramic coating too)
I noticed your upper arm after installing level kit is leveled (straight), how, because I installed level kit on my 2017 lariat but still the upper arm facing downward. I appreciate if you share what you did.
Hey Anees, I actually had a shop install the level kit so unfortunately I cannot give you specifics. My basic understanding is you disconnect the shock, bolt the spacer to the shock, and the install it back in the shock tower. And then you’ll need to get the wheels re-aligned. Hope that helps!!
@@MagargeeFilms same here shocks were disconnected and fixed the levelling kit, then did the wheel alignment but still the upper arm facing downward and due to offloading the upper arm hitting the coilover.😥. Anyway thank you for response. 👍🏻
@@85anees85 that sounds right!! Not sure why your upper arm is not level. I’m sorry I don’t have any more advice other than reach out to a tire shop and ask them
I’m new to trucks so sorry I’m advance lol. Just got my 2017 F-150 XLT Sport yesterday, and it’s already kitted out. But when you say 33” like I hear 33’s, 35’s, etc. what does that number actually depict? Would it be the outer diameter? Because I have toyo open country tires on mine and they have an outer diameter of 34”
Hey Kyle! Congrats on the new truck! So when you hear 33" or 33s or 35s, thats referring to the outter diameter of the tire (or how tall the tire is when standing up right). Keep in mind that number isn't exactly accurate if you were to get out a tape measurer and measure it for yourself. Hopefully this link helps explain how tires are measured www.lesschwab.com/article/tire-size-explained-reading-the-sidewall.html
Awesome!!! I did convert the reverse lights to LED but not the turn/ brake. Yorkim Super Bright 3157 LED Light Bulbs White, 3056 3156 3156A 3057 4057 3157 4157 T25 LED Bulbs for Brake Lights, Backup Reverse Lights， Reve www.amazon.com/dp/B01A4Z3FOS/ref=cm_sw_r_cp_apip_sdvN8sK3owOUB
Thank you! they are 17x9! They do have an offset as well. Not sure what it is exactly, but the tires have a 1" poke. Hope that helps! Would love to see what wheels and tires you get!
You totally could, however it is very difficult to remove the badges to paint, without destroying them. And you don’t want to paint the badges while they’re on the car, because you’ll risk getting paint on you car. But with plasti-dip, you can easily remove any over spray! 😊
It’s amazing!! Takes like 2 seconds to open up or close, protects the the dash, and keeps the truck cool. It’s also compact and out of the way when driving. Doesnt block visibility at all.
Bro. I love all your ideas!!!! I’ve been wanting to do some upgrades for awhile but just didn’t know what on my 2019. Definitely going to add some more now. 🤠🤠🤠
Awesome!!! Glad you found the video useful and found some ideas for yours!! Would love to hear what you do! Links in description if you need! Like and Subscribe! 🤙🏽
was this shot on Biola University parking lot? I’m a returning senior this Fall and was considering buying a truck. it’s be a cool coincidence if you’re local I would love to meet you.. 😅
@@MagargeeFilms aw darn. it looked so similar to my schools parking lot hahah. I am looking into a used toyota tacoma but have no idea which generation/engine/build is the most reliable.
Glad you enjoyed it and hopefully got some great ideas! Can’t wait to see what you do! Please subscribe! I would appreciate the support! Product links in bio 🤙🏽
Thanks! It was pretty easy to do! The width is about 5”. I got the vinyl on Amazon. It’s 3m 1080, which is a good quality for cars. 3M 1080 M22 MATTE DEEP BLACK 5ft x 1ft (5 Sq/ft) Car Wrap Vinyl Film www.amazon.com/dp/B00KPX8LSK/ref=cm_sw_r_cp_api_glt_fabc_KXDBDPWETY1K8H6CHDB3
@@MagargeeFilms thank you so much. But more specifically, what was the width of each individual line? I’m guessing approximately 2.25 inch? Thanks again.
Hey not sure if you will see this comment bud. I really like those Ecobeast badges. I can’t find them on the link. Any info on what’s up with that? Appreciate it 🤟
Hey man! Unfortunately the black ecobeast Badges aren’t on Amazon anymore. Here is a link to black lariat badges. Idk what trim level you have. Hope this helps! amzn.to/3viHZDB
@@MagargeeFilms thanks for the quick response man! Sadly I own an XLT sport not a Lariat. I’m trying to find a cheaper one. The best one I found that’s legit is around $120 for the three pieces. Not sure what happened with your link. I was digging the ones you got.
@@dutchynehtam yeah I know! I got my badges like a year ago. Hopefully they’re just temporarily out of stock. I’ll search the internet and see what I can find. I’ll let you know if I find anything 🤙🏽
eBay. Black xlt. www.ebay.com/itm/224657240559?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1vbl2pyzcRsWHi1JMxhMYBQ30&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=224657240559&targetid=1599090335177&device=m&mktype=&googleloc=9031526&poi=&campaignid=15275224983&mkgroupid=131097072938&rlsatarget=pla-1599090335177&abcId=9300697&merchantid=459453796&gclid=EAIaIQobChMI65vZjuaO9gIVqgytBh1eMwOSEAQYASABEgItx_D_BwE
Here’s the link. Be sure to check if you have a trim piece or not on your fenders so you order the right style! Teccom Mud Flaps Splash Guards for 2015-2019 Ford F150 2015-2019 with Wheel Lip Molding Front and Rear 4psc Set ABS Molded www.amazon.com/dp/B07Z1K1RJ6/ref=cm_sw_r_cp_apip_OTJnHznGFuOeg
Yes! Here’s an amazing link! Husky 10-Compartment Interlocking Small Parts Organizer Black www.amazon.com/dp/B07FLP9MKZ/ref=cm_sw_r_cp_api_glt_fabc_H9H9HBQZJE7EGW9HR1WK
@@DerekandCourtney It was a Flat Oil Based paint that I used with a spray gun. But honestly, spray paint would work just fine. Just sand and prime first
@@MagargeeFilms OK because my bumper is chrome which I don’t like so I’m going to try to sand it and then prime and paint. But I really love your truck 💙
The headlights have been amazing! Super bright, they don’t get hot, easy to install. These are less than $100 SEALIGHT 9005/HB3 High Beam H11/H9 Low Beam 14000LM LED Headlight Bulbs Combo Package CSP Chips 6000K Cool White www.amazon.com/dp/B07K438ZQD/ref=cm_sw_r_cp_api_glt_fabc_CDD3RQHTANV3P09MFVCN?_encoding=UTF8&psc=1
Great video bro !!! You have some ideas for my truck 👍🏼
Awesome! Glad I could help! I’d love to see what you do to yours!!
Please subscribe! would love the support!! :)
Can’t remember the last time I watched an entire 23 minute video. I watched from start to finish. Good video. Gave me the antenna idea. Literally ordering right now as I watch from Amazon. lol.
Im glad you enjoyed the video! Check out my other videos for more F150 Content!
just turned 17 bought my dads 2018 F-150 XLT off of him thanks for the ideas!
You’re welcome! Glad you enjoyed the video!!
There is a connection under the steering column that would eliminate the start/stop feature. Just unplug it.
That works great until you need to tow something and spend 2 hours trouble shooting why your lights on the trailer don't work. Not that I learned this the hard way.
I found that if I lightly hold brake when at a stop the engine does not cut off. When I push down firmly it cuts off.
I have a button for that
I installed a 4D TECH Start/Stop Eliminator on my 2020 F-150 5.0L today. Turn key to "ACC", plug the unit into the OBD-II port, start the truck, and the "A" button reads, "OFF" every time. No more engine shutdowns at stop lights. I love it!
@@billrook6165that’s awesome! has it given you a check engine light since?
I just bought my first truck, a 2017 ford f 150 xl, this video helped allot with some ideas. For me so fat I've put in led interior lights, then a gas cap sticker, and a talgaite sticker. Thanks for the awesome ideas! hopefully my truck will look as nice as this one someday!!! Thanks!!!!
Congrats on the new truck! Glad this video gave you some ideas!
Please subscribe! I’d love your support! 🙌🏽
I have a 2015 F-150 Lariat. It’s certainly the little details that catch people’s eye. You made your truck look another trim, or 2, better.
Thank you!!! I’m super happy with the XLT trim! I just wanted to personalize it to me! 😊
I have 2015 lariate lifted
What is the best looking trim
Great video bro! Love seeing everything that you've done with your truck! You gave me a few ideas as well. Love the white and black. Reminds me of my old truck.
Thanks! Glad it inspired you!!
Great looking truck, love the storm trooper look. I suggest you give Forscan a try. You could of disabled auto start/stop from the truck’s ECM. Also disable hyper flash on your tail lights and a bunch of other mods. UA-cam it bru, you will love it.
Thank you!!
Oh really?!?! That would be pretty cool! I’ll look into in! Thanks!
Please subscribe! would love the support!! :)
@Freund I’ve played with it and got it down to just 3chime when door open can’t seem to get it
I installed the SeaLight led high, low, and fogs. I also installed switchback led turn signals. They are a amber turn signal but the switch to a day time running light when the turn signal cancels. They really add to the amount of light at the front of the truck.
@@brianheikes1025 very nice!!
Black and white, eah.
Love the Stormtrooper look. 👍👍👍
Thanks!!! 🙌🏽
The lights under the hood really got me. Those were an awesome idea
Thanks! They’ve come in handy a few times!!
Please subscribe! would love the support!! :)
This really Informative, I wanted to do more to my ‘17 and I didn’t want to break the bank yet! Thank you so much!
Thanks for the love!! Yeah I think I’m total, the upgrades were close to $3,500. I didn’t do them all at once. This is over the course of a year 👍🏼
Progress, little by little.
Please subscribe! would love the support!! :)
Plasti-dip is great stuff. I did my badges and rims on my '09 and it turned out nice. Just bought a '14 FX4 5.0 that'll be getting that treatment, this week.
Yes it is! Love that stuff! 🙌🏽
I definitely agree with you about the 33s and leveling kit riding smoother. Maybe because it absorbs more of the bumps? Great Video!
I think so too!!!
Glad you enjoyed it! 🙏🏽
I have a 2017 XLT FX4. It has stock 20 inch wheels on it. It is not level or lifted. Can I put 33s on it and not rub? Please advise
Sorry, too lazy to read through the comments to see if this has already been said, but:
Doesn't that LED light bar on the front bumper interfere/restrict the airflow to the intercooler? (I have an EcoBoost and was under the impression that should be an open airway for the most part)
It doesn’t not cause airflow problems.
Ford sells these truck from the dealership with a license plate covering that hole anyways.
Catch can is a great mod but it has more to do with direct injection than the turbos. The valves get gummed up otherwise and keeping the turbos cleaner is just a bonus.
Great upgrades and they seem somewhat simple to do. I don’t have an F150 yet but already have my eye on a 2017. More videos like this one would be great.
Thanks! Yes! Super simple and affordable. Obviously you could go crazy but these are a good start.
What kind of videos would you like to see?
@@MagargeeFilms it would be great to see top 5 things you like about your truck/ top 5 things you don’t like. Also what are the next mods you have in mind? Talk about how’s fuel consumption?
@@BronzeRook Great suggestions!!! Id love to make those videos soon!!
Please subscribe! would love the support!! :)
Thanks for the video. New subscriber. Picked up my 2023 a month ago. Installed an s&b intake, mbrp exhaust and did the cheap vta blow off mod lol. Also added illuminated door sils, interior lighting, underglow and a few others from f150 leds. I really enjoy seeing what others do for their builds. Thanks again
Sweet mods! Congrats on the new truck!! Glad you enjoyed the video!
With the tail lights/blinkers, you need to splice in a resistor to the new LED lights. LED's consume a lot less power so they flicker twice as fast when you don't have a resistor wired in. I've done it several times.
RIP Ken Block
You’re absolutely right! I got new taillights a while ago that came with built in resistors. Check out the video. ua-cam.com/video/aFEnUKz9FKo/v-deo.html
RIP Ken Block ❤️
Good video. I have been told by some mechanics that if you have 2020 or newer you don't need a catch-can because they fixed the issue. The start/stop, you just need to unplug it under the steering wheel and that will prevent the truck from auto-turning off.
Very Cool! Glad they fixed those issues!
Actually it started with the 2018 model F-150
Nice find on the retractable sunshade. That thing is awesome as well as your other mods!
Thank you! I have the retractable sun shade in all my vehicles! Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_CRNVMZCTBJXVDSCMA2HS
Can you please tell me the model number of the retractable sun shade
@@andrewvalenzano3257 I have the retractable sun shade in all my vehicles! Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_CRNVMZCTBJXVDSCMA2HS
Please subscribe! would love the support!! :)
Is the light bar infront of the intercooler blocking air for the turbos?
The light bar is in front of the intercooler but there’s plenty of room for air so get in still. Never had an overheating issue (knock on wood)
Good stuff!
First time I’ve seen new ideas for the 150 in a while. I may do the under hood lights
Thanks for the love!
I love the under hood lights! So convenient 👌🏽
Please subscribe! would love the support!! :)
Did you have trouble getting the dust covers back on after installing the headlight bulbs ?
Yeah that can be a pain but I was able to get them on.
If you undo the clips for the inner fender and pull it back using a tie down strap, you can sit on the ground with your back against the tire and 'easily' replace the bulbs and dust covers. I found this far easier than laying on the ground and going straight up behind the bumper.
@@79random nice! That’s a good strategy!
Please subscribe! would love the support!! :)
Sweet truck man, do you know the exact tire size? and also would it fit 35s? Or 33s is the biggest you can fit with a leveling kit thanks in advance
Hey thanks!! Yeah there 33s. 285/70R17
I think if you go with 35s (305) you’ll rub and have to do some trimming.
Please subscribe! would love the support!! :)
Nice truck man, can you provide a link for the eco beast badges?
Yes! please subscribe! amzn.to/3AqNm30
Good video, i was expecting 4 or 5 but you kept going with many good mods!
Haha glad you enjoyed it! Please subscribe! I’d appreciate the support 🙏🏽
Great video! Do you have the link to backup and cargo light LEDs? I'm looking all around amazon, but just not sure which ones to get?
Led cargo lights
amzn.to/3sKKNqb
Led reverse lights
amzn.to/35Tk1nr
Is that light bar blocking your air for the inter cooler???
Nope! No different than having the license plate there, which comes stock from the dealer
You’ve got a nice looking truck. It seems like you spent a lot of time on it. Do you have a video on how you plastidipped your emblems. I’ve attempted it before but did not come out as clean as yours.
Thanks for the love! No I have not made a video yet but would like to make one soon! The key is apply the next layer before the previous one has completely dried. That way they bond together. And when you peel it off, make sure the plasti dip is 100% dry and tear away from the emblem (down, up, or to the side). If you pull straight towards you, you’re more likely to pull the PD off the emblem
Please subscribe! would love the support!! :)
Where did you get the blacked out F150 emblems?
Amazon!! amzn.to/3xCVriX Please subscribe! I would appreciate the support! :)
nice truck I have a 17 f160 eco i took the lic place out and put a grill becuase of airflow to the intercooler lower my temp by about 5 degree
Didn’t see the mud flap link. Can you provide that?
Be sure the check whether you have a trim on your fender or not
Teccom Mud Flaps Splash Guards for 2015-2019 Ford F150 2015-2019 with Wheel Lip Molding Front and Rear 4psc Set ABS Molded www.amazon.com/dp/B07Z1K1RJ6/ref=cm_sw_r_cp_apip_IFHKqBlpERDUd
Nice truck. FYI all you need for the led blinker is an led flasher. You can pretty much buy them anywhere now.
Do you have a link for the tail light reverse bulbs? Did you have to install resistors when you replace the original bulbs with these LEDs?
I did not install a resistor and that’s why the blinker flashed double time with the LED. So I left the turn/brake light with the stock halogen bulb and only put the LED for the reverse. If you want to use the LED bulb for brake and turn, you’d probably need the resistor
Yorkim 3157 LED Light Bulbs White Super Bright, 3056 3156 3156A 3057 4057 3157 4157 T25 LED Bulbs for Brake Lights, Backup Reverse Lights， Reverse Tail Lights - Pack of 10 www.amazon.com/dp/B01A4Z3FOS/ref=cm_sw_r_cp_api_glt_fabc_T8SY6GX38TGNGX24DZRV?_encoding=UTF8&psc=1
Please subscribe! would love the support!! :)
I'm sure this question was answered, but I looked at your list of items and I did not see that sunshade where is it from? Thanks
I didn't have room to fit it in the description. Heres the link! www.amazon.com/gp/product/B01MUBQWHG/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
@@MagargeeFilms Thank you.
Please subscribe! would love the support!! :)
Nice truck and great upgrades. Thanks for sharing!!
Thank you! Glad you enjoyed!
Cool. I like very much your upgrades.
Thanks! Glad you enjoyed it!
Cool truck ! Where did you get that license plate frame ? Can you provide a link ? Thanks !
Thanks for the love!! Yeah heres a link www.amazon.com/Cruiser-Accessories-58150-Matte-License/dp/B073SQ9B2T/ref=sr_1_6?dchild=1&keywords=black+license+plate+frames+industrial&qid=1615331926&sr=8-6
Please subscribe! would love the support!! :)
truck is awesome! tell me how you dipped your ford ovals. i bought the stuff to hyperdip mine but totally dont know how to make it look like yours!
I used plasti dip. It comes in a spray can. Link should be in the video distribution
Hey brother where did you get your mud flaps. I believe I have the same fenders as yours.
Hey! Here’s the link! Thanks for watching!
Teccom Mud Flaps Splash Guards... www.amazon.com/dp/B07Z1K1RJ6?ref=ppx_pop_mob_ap_share
Please subscribe! would love the support!! :)
Great F150, can you provide link/ info for the on/off switch bypass?
Auto Start Stop Eliminator
www.autostopeliminator.com/products/2015-ford-f-150-autostop-eliminator
Please subscribe! would love the support!! :)
Do you have the video of how to install the amber little lights? Thanks
I don’t yet. I basically spliced in the positive to the running lights and then grounded the negative. Secured the Amber lights to the grill with zip ties.
How you secured them? Cause I used zip ties and they get way out of place. Yours look centered
Truck looks good! One question, you said yours was a 2x4 not a 4x4, but it looks like you have a 2h 4h switch, did you change out the coin holder to that or is it something else? Thanks
Thanks! So it actually came with that knob. It’s looks like the 4h 2h knob but it controls the diff-locker only.
On the 4x4s, you turn the knob to change the drive and pull the knob out to turn on the diff-locker. But with the 2wd, it just turns to activate the diff-locker.
Please subscribe! would love the support!! :)
When installing a level kit does it change the steering in anyway? I've been told this but not sure if it is true.
I did not notice any steering differences or issues. You do however need to get an alignment after installing the level kit.
So it really depends on how much height your putting on your truck. And if your doing a suspension or a body lift. Both change the Center of Gravity which is why ppl say it affects the steering but the suspension has a bigger effect than just a regular body lift cuz you normally just do about a 2" lift. Thats why suspension lift is more expensive cuz more modifications have to be done to multiple parts over the basic body/ lvl lift kits
Please subscribe! would love the support!! :)
Mine hyper flash inside the truck but outside the lights flash the same as stock incandescent bulb.
Awesome vid man! Running a Super Duty, but looks like most of the stuff will translate right over...
💯💪👌
Thank you! Nice ride! Hopefully these mods will work for you too! 🙌🏽
You should add these:
- rwd rear shocks (Rancho or Eibach)
- proper rwd coilover leveling kit (Eibach or Elka)
- sway bar (less body roll)
- upgraded brake rotors
- painted brake calipers
- cold air intake
- exhaust
- body color mirror caps
- bed cover
- center armrest cover
- painted air vent trim
and paint correction detail (remove those swirl marks, maybe add a ceramic coating too)
Love it!! Thanks for the suggestions!!
Add tow mirrors too. Took me 15 minutes to swap. Easy plug and play
I noticed your upper arm after installing level kit is leveled (straight), how, because I installed level kit on my 2017 lariat but still the upper arm facing downward. I appreciate if you share what you did.
Hey Anees, I actually had a shop install the level kit so unfortunately I cannot give you specifics. My basic understanding is you disconnect the shock, bolt the spacer to the shock, and the install it back in the shock tower. And then you’ll need to get the wheels re-aligned. Hope that helps!!
@@MagargeeFilms same here shocks were disconnected and fixed the levelling kit, then did the wheel alignment but still the upper arm facing downward and due to offloading the upper arm hitting the coilover.😥. Anyway thank you for response. 👍🏻
@@85anees85 that sounds right!! Not sure why your upper arm is not level. I’m sorry I don’t have any more advice other than reach out to a tire shop and ask them
@@MagargeeFilms Thank you
@@85anees85 you’re welcome!
I hate Ford trucks, but gotta say that you did excellent. I would own that truck. Nice job bro
Thank you! Hahaha
Just out of curiosity, what do you hate about Ford?
(I drove a Silverado for 8 years)
What a great device. I just ordered via your link. My biggest thanks.
Awesome! Glad you found something helpful in the video! 🎉
I’m new to trucks so sorry I’m advance lol. Just got my 2017 F-150 XLT Sport yesterday, and it’s already kitted out. But when you say 33” like I hear 33’s, 35’s, etc. what does that number actually depict? Would it be the outer diameter? Because I have toyo open country tires on mine and they have an outer diameter of 34”
Hey Kyle! Congrats on the new truck! So when you hear 33" or 33s or 35s, thats referring to the outter diameter of the tire (or how tall the tire is when standing up right). Keep in mind that number isn't exactly accurate if you were to get out a tape measurer and measure it for yourself. Hopefully this link helps explain how tires are measured www.lesschwab.com/article/tire-size-explained-reading-the-sidewall.html
Lots of cool stuff!
Glad you enjoyed it! Please subscribe! I’d appreciate the support
I did the same upgrade as you. Thanks for the links. Did you convert your tail and reverse lights to LED too? Link?
Awesome!!! I did convert the reverse lights to LED but not the turn/ brake.
Yorkim Super Bright 3157 LED Light Bulbs White, 3056 3156 3156A 3057 4057 3157 4157 T25 LED Bulbs for Brake Lights, Backup Reverse Lights， Reve www.amazon.com/dp/B01A4Z3FOS/ref=cm_sw_r_cp_apip_sdvN8sK3owOUB
Please subscribe! would love the support!! :)
Are your rims 17 x 7.5 or 17x 9 ???
I really like the strong stance
Thank you! they are 17x9! They do have an offset as well. Not sure what it is exactly, but the tires have a 1" poke. Hope that helps! Would love to see what wheels and tires you get!
What brand is the auto stop start remover?
Make sure to check which style switch you have
www.autostopeliminator.com/
I like the Coast guard stripes
in a few years you can take off the 3m tape on the sides and you'll have a ghosted white stripes. nice clean looking truck
Haha that would be cool!!!
Wow!! Thanks for all the accessory links and tips!! Awesome!
Of course! Glad you enjoyed it! Please subscribe! I’d appreciate the support 😊
Oriellys is loving you.
Haha oh yeah
just installed a 2” leveling kit
and it does ride a lot better
same 33” tires
Nice man! Glad to hear it
Solid video. Exactly what I was looking for; minor upgrades to improve aesthetics and quality of life.
Awesome! I’m in the same boat brother 🤙🏽 products are in the description. Please subscribe! Would appreciate the support!
That connector also applies power for your trailer backup assit.
the f150 ecobeast emblem link doesn't work. Any new links?
Looks like the “ecobeast” emblems are temporarily out of stock. Here is a link to black xlt badges. amzn.to/3L9UjLV
Wouldn't chrome stripper and then regular matte black pray paint work better than plasti-dip?
You totally could, however it is very difficult to remove the badges to paint, without destroying them. And you don’t want to paint the badges while they’re on the car, because you’ll risk getting paint on you car. But with plasti-dip, you can easily remove any over spray! 😊
How well is the sun shade working out ? Some reviews on Amazon didnt like too much .
It’s amazing!! Takes like 2 seconds to open up or close, protects the the dash, and keeps the truck cool. It’s also compact and out of the way when driving. Doesnt block visibility at all.
Please subscribe! would love the support!! :)
nice video, what’s the link to the led bar kit
Please subscribe!
amzn.to/30JqL5r
Great video! Just bought my first truck/F-150 and will define be making some upgrades…
Amazing!! Congrats!
All the product links are in the description. Please subscribe! I’d appreciate the support 🙏🏽
I have a 2015 F250 Lariat but dode you gave me some ideas
Awesome! Glad to help! What do you think you’re gonna do?
You going to black out the head lights ?
Maybe!! I just love the bright lights and dont want them to look dim when im driving at night
Well done, I like your truck. I will use some of these on my truck.
Awesome! Thank you, glad you enjoyed the video!
Awesome add-ons! How did you take out seat and install the back seat latch?
I actually didn’t take the seat out! Just reach behind and release the latch with your finger or hook. It’s a rod you have to release
auto stop / start can be tweaked in forscan
Great job! You put in some work getting all of this information together! Thanks for the links, very helpful
Thank you! Glad you liked it!
Please subscribe! I would appreciate the support 😊
Do you have the link for the windshield shade?
Yes sir!!
Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_144S7C3STJCF4ZMCECYE?_encoding=UTF8&psc=1
@@MagargeeFilms thanks
Great video! Great ideas! I’ve got some work to do.
Awesome!! Glad you enjoyed it!!
Great idea with the hood lights
Those are my fav! I actually use those lights everywhere! I just installed some as dome lights in my yxz1000r
Bro. I love all your ideas!!!! I’ve been wanting to do some upgrades for awhile but just didn’t know what on my 2019. Definitely going to add some more now. 🤠🤠🤠
Awesome!!! Glad you found the video useful and found some ideas for yours!! Would love to hear what you do! Links in description if you need!
Like and Subscribe! 🤙🏽
Please subscribe! would love the support!! :)
where did you get the 3m vinyl wrap it is not listed
amzn.to/41eBnmm
Awesome video man! I'm just starting to do some upgrades on my F150! Thanks for all the tips!
You’re welcome! Glad you liked it!
Did you film this at Kaiser.
No lol
was this shot on Biola University parking lot? I’m a returning senior this Fall and was considering buying a truck. it’s be a cool coincidence if you’re local I would love to meet you.. 😅
Haha no! It was actually shot in Parking Structure by Fullerton CA.
Which truck you thinking of getting?!
@@MagargeeFilms aw darn. it looked so similar to my schools parking lot hahah. I am looking into a used toyota tacoma but have no idea which generation/engine/build is the most reliable.
great video. really learned a lot. cant wait to upgrade my new 2012! (My first truck)
Glad you enjoyed it and hopefully got some great ideas! Can’t wait to see what you do! Please subscribe! I would appreciate the support!
Product links in bio 🤙🏽
@@MagargeeFilms awesome absolutely👍🏻 you’ve got my sub
Fantastic truck congratulations
Thank you! Please subscribe
I like the two stripes on the fender. Where did you get that vinyl? Also what is the width of your stripes? because it just looks perfect
Thanks! It was pretty easy to do!
The width is about 5”.
I got the vinyl on Amazon. It’s 3m 1080, which is a good quality for cars.
3M 1080 M22 MATTE DEEP BLACK 5ft x 1ft (5 Sq/ft) Car Wrap Vinyl Film www.amazon.com/dp/B00KPX8LSK/ref=cm_sw_r_cp_api_glt_fabc_KXDBDPWETY1K8H6CHDB3
@@MagargeeFilms thank you so much. But more specifically, what was the width of each individual line? I’m guessing approximately 2.25 inch? Thanks again.
Each line is about 5”. It’s wider than you think! Especially when you stand back and look at it.
@@MagargeeFilms oh wow. Ok thanks. I’m glad I asked. Thanks for the video man.
You’re very welcome! Please subscribe! Would love he support 🙏🏽
Really sweet truck!
@@anthonycaldi7056 thanks!! Appreciate it 🙏🏼
Where is the sunshade from
Amazon!! Dash Designs The Shade Retractable Windshield Sunshade, 23" (SV03) www.amazon.com/dp/B01MUBQWHG/ref=cm_sw_r_cp_api_glt_fabc_PAY17PSKHDSFM3EPFY6Z?_encoding=UTF8&psc=1
Link in bio too 👍🏼
Hey not sure if you will see this comment bud. I really like those Ecobeast badges. I can’t find them on the link. Any info on what’s up with that? Appreciate it 🤟
Hey man! Unfortunately the black ecobeast Badges aren’t on Amazon anymore. Here is a link to black lariat badges. Idk what trim level you have. Hope this helps!
amzn.to/3viHZDB
@@MagargeeFilms thanks for the quick response man! Sadly I own an XLT sport not a Lariat. I’m trying to find a cheaper one. The best one I found that’s legit is around $120 for the three pieces. Not sure what happened with your link. I was digging the ones you got.
@@dutchynehtam yeah I know! I got my badges like a year ago. Hopefully they’re just temporarily out of stock. I’ll search the internet and see what I can find. I’ll let you know if I find anything 🤙🏽
eBay. Black xlt. www.ebay.com/itm/224657240559?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1vbl2pyzcRsWHi1JMxhMYBQ30&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=224657240559&targetid=1599090335177&device=m&mktype=&googleloc=9031526&poi=&campaignid=15275224983&mkgroupid=131097072938&rlsatarget=pla-1599090335177&abcId=9300697&merchantid=459453796&gclid=EAIaIQobChMI65vZjuaO9gIVqgytBh1eMwOSEAQYASABEgItx_D_BwE
shop.vipautoaccessories.com/products/f150-xlt-blackout-fender-emblems-and-tailgate-badge
Clean lookin truck!!
Thanks!! i appreciate that!!
Please subscribe! would love the support!! :)
@@MagargeeFilms done! And I gotta catch up videos!
how long did the sea light leads last you?
I got them in 2017 and still run them 👍🏼 no issues.
Top loader safe in bottom of my console. 4 button pushes, and i'm in it. Anything of value goes in it, including any truck paper work.
Very GQ truck and at the same time seemingly soft and feminine. Nicely done.
So you found a JC Whitney catalog.
Amazon is the new JC Whitney
Where you got ur vinyl wrap
amzn.to/4awyClq
What mud guards are you using?
Here’s the link. Be sure to check if you have a trim piece or not on your fenders so you order the right style!
Teccom Mud Flaps Splash Guards for 2015-2019 Ford F150 2015-2019 with Wheel Lip Molding Front and Rear 4psc Set ABS Molded www.amazon.com/dp/B07Z1K1RJ6/ref=cm_sw_r_cp_apip_OTJnHznGFuOeg
Please subscribe! would love the support!! :)
Should get a full race intercooler if you’re going to keep the light bar
Nice job. Can you provide the link for the under seat toolbox? Thanks!
Yes! Here’s an amazing link!
Husky 10-Compartment Interlocking Small Parts Organizer Black www.amazon.com/dp/B07FLP9MKZ/ref=cm_sw_r_cp_api_glt_fabc_H9H9HBQZJE7EGW9HR1WK
Please subscribe! would love the support!! :)
Did you paint the grill and bumper black?
I did paint the grill black but the bumper is a vinyl wrap! I chose to wrap the bumper so I could go back to white if I ever wanted to.
@@MagargeeFilms What kind of paint Did you use
@@DerekandCourtney It was a Flat Oil Based paint that I used with a spray gun. But honestly, spray paint would work just fine. Just sand and prime first
@@MagargeeFilms OK because my bumper is chrome which I don’t like so I’m going to try to sand it and then prime and paint. But I really love your truck 💙
@@DerekandCourtney awesome! Let me know how it turns out!!
Thanks for the love! 🙏🏽
Magargee Films How has the headlight bulbs been doing? I’m wanting to change mine out but don’t want to spend $200
The headlights have been amazing! Super bright, they don’t get hot, easy to install. These are less than $100
SEALIGHT 9005/HB3 High Beam H11/H9 Low Beam 14000LM LED Headlight Bulbs Combo Package CSP Chips 6000K Cool White www.amazon.com/dp/B07K438ZQD/ref=cm_sw_r_cp_api_glt_fabc_CDD3RQHTANV3P09MFVCN?_encoding=UTF8&psc=1
@@MagargeeFilms That’s great to hear. Thanks for the very quick reply.
@@MagargeeFilms Well I hope to have the same experience you have had. I just placed now my order.
@@keepnitsharp of course! You’ll love the lights!!
Please subscribe if you haven’t already! 😁🙏🏽
Links to tail light, 3rd brake, and license plate LED?
License plate lights.
RUXIFEY LED License Plate Light... www.amazon.com/dp/B083GFZXL4?ref=ppx_pop_mob_ap_share
Brake lights
Yorkim Super Bright 3157 LED... www.amazon.com/dp/B01A4Z3FOS?ref=ppx_pop_mob_ap_share
3rd brake light
iJDMTOY (2) Xenon White High... www.amazon.com/dp/B00S1OD8EM?ref=ppx_pop_mob_ap_share