Andrew, could you please tell me the two wires that need to be jumped. On wiring diagram there is no red/blk wire and on mine there is not one. I see the red/grn which makes sense because that goes to voltage reg, but what would the other be. Thanks
Yellow and black wire on the small harness for the fuel level. I can take a pic if u need it. also you have to run a separate ground from the sending unit to the dash
Hey I was wondering did you ever hook up your turn signals to the dash if so do you remember the color of the wires and how did you go about it I have a 95 Mustang that I just did a turbo build on it's used for the street and would like to have my turn signals working through the dash I just picked up Holly 6.86 dash. By the way your car is amazing
Could you show how to add the boost gauge? Tuner forgot to add it and I would like to know where my boost is at and if it's boosting correctly. It has to be in there, because I see the boost map sensor hooked up into the ECU . Thanks
I know you're running a drag setup but do you still run turn signals? Did you have to do anything to integrate them when changing from stock gauges to holley dash?
ANOTHER VID "Thats what im talkin bout" hey get the "thin mint" some fuzzy dice and curb feelers lol.. ok no don't I couldn't take it.. lol keep it up brother
Hey man question. Did you jump that alternator wire because you kept the factory 3 wire style plug? I converted mine to a 1 wire and wondering if that is something I am going to need to consider doing
hey Andrew can you do a video on how you set up your auto trans? like what crossmember, drivershaft, shifter and how do you control it.
Andrew, could you please tell me the two wires that need to be jumped. On wiring diagram there is no red/blk wire and on mine there is not one. I see the red/grn which makes sense because that goes to voltage reg, but what would the other be. Thanks
no disrespect brother but i was so hoping holley did a better job. it reminds me of a quick E bay find
Yellow and black wire on the small harness for the fuel level. I can take a pic if u need it. also you have to run a separate ground from the sending unit to the dash
Looks great Andrew!
Hey I was wondering did you ever hook up your turn signals to the dash if so do you remember the color of the wires and how did you go about it I have a 95 Mustang that I just did a turbo build on it's used for the street and would like to have my turn signals working through the dash I just picked up Holly 6.86 dash. By the way your car is amazing
Could you show how to add the boost gauge? Tuner forgot to add it and I would like to know where my boost is at and if it's boosting correctly. It has to be in there, because I see the boost map sensor hooked up into the ECU . Thanks
Great video as usual! How's the engine block coming?
Debating my ass off if I should order a Holley HP but I have so many questions about it
Do you happen to have a video of how you wired the alternator in with the Holley? Did you just run a 12v feed off the power tap?
Andrew do you know if these wires are the the same on the 03/04 cobras?
I need one of those plates ! 👍
They are $45 shipped for the abs and $80 shipped for carbon fiber.
Where are the panels from?
@@jacobkeller8440 I made the Holley dash mount. You can email me y2k2gt@yahoo.com
y2k2gt just emailed you
Y2k2gt are you still making the plates ?
Looks awesome
I know you're running a drag setup but do you still run turn signals? Did you have to do anything to integrate them when changing from stock gauges to holley dash?
What knock sensors are you running and what connector or did you delete them
Do you have Eddie Edwards contact information
That looks badass!
no one builds nicer (then newest)digital cluster for older models 2010-2015 ,is that that hard to code?
900 hundy for that dam man I'm seeing 95 to 99 stangs going for a grand and up you must love that car are just have plenty money to dump into it
does it have turn signals ?
Which dash do you have? The holley 553-106 or the Holley 553-109
dose the guy make any other dash set ups
Looking forward to a config vid!
How can I change the color on the digital
It’s so tiny
That's what she said !!!!!!
Love it
Anyway I could get the dash for a 97 cobra
ANOTHER VID "Thats what im talkin bout" hey get the "thin mint" some fuzzy dice and curb feelers lol.. ok no don't I couldn't take it.. lol keep it up brother
How much do you want for the stock gauges?
Where can I get the digital dash from
I had a bad alternator take out an instrument cluster.
Hey man how did you figure out the ohms you had to have for the fuel sending wire? Doing the same thing in my fox right now.
Stock sender for a foxbody should be 16 empty 158 full
Dude im starting my turbo cobra build and was looking for the dash kit for a holley. How can I get the kit from your buddy
MIKE J here’s a link to his Facebook
facebook.com/profile.php?id=100010301829633
Hey man question. Did you jump that alternator wire because you kept the factory 3 wire style plug? I converted mine to a 1 wire and wondering if that is something I am going to need to consider doing
Did you ever get you magazine with you in it?
Tadd Mason no 😔
@@andrewlavender08 email me your address @taddmason2003@yahoo.com
@@andrewlavender08 can you give me eddy information so I can get a temp plate for 93-02 trans am
Looks good in there
Can your buddy make me one I’ll pay?! DM me if he can thanks!
To small.