This effect gives me so many possible ideas about what I can do when I begin to repaint my '94 Super V 2000. Over then past years I've grown bored with the plain jane black and silver of the factory style paint I did on the bare frame. Can't wait for the next video to see what ideas it sparks .!!
Ochsengalle und Pipi?! Abgefahren! Vielen Dank für deine tollen Videos. Ohne viel Gelaber kommst du direkt zum Punkt. Davon sollten sich andere UA-camr eine fette Scheibe abschneiden! Weiter so und viel Erfolg!
Nice one I used the crystal fx stuff years ago when it first came out I think I still have a bottle knocking around Somewhere 👍love your work fellow custom painter great channel all the Dred fx custom paint
I wonder if it's possible to control the crystalline development? Using some of the urea crushed into powder and placed strategically for nucleation points might do it. And we're talking like individual granules.
I appreciate you taking the time to explain this. As an artist I’m always on the lookout for new techniques. I’ve already seen it but could it be possible to just use DEF fluid instead?
I just made a paint studio so I can re touch my 2003 540i BMW, I am serousily conserding doing this method for my car, it looks increiable! I might do more of a light blue under coat tho, just to match the original paint it came with.
Thank for video. So if I’m understanding, I will paint a base color, then clear it with 2 coats of 2k clear, sand it with 800 then put crystal liquid on it, then paint light black then sand with grey scotch pad? Then I’m assuming paint candy over then clear it ?
I tried this method earlier though the urea solution wasn't sticking to the surface like yours does in the video, I know it works because the solution got in my gloves and crystallized, but on my test panel it would just slide right off, do you have any tips on what I could be doing wrong?
This so Superb My old car needs a respray Do you think I could do my whole car like this ? You made this look easy and gave me confidence to test and see if I can do the car
@@ETOE I will practice and then give it a go If it can be done ….. I will be able to do it If not it will be candy cherry red all over Never be afraid to try
These videos are amazing. Thank you. If I'm going for a white on white effect, how would I go about doing that? White base with an off white overtop, then clear coat? I'm trying to match a set of custom white wheels I'm ordering. Thanks!
Hi . I did try again but didn't work. My problem is when I go to clean the crystal whit water and soap , the crystal don't come off . So maybe I did spray to much paint on top of the crystal, I did 3 layer of paint , or maybe I wait to much time and let the paint dry to much on top of the crystal . So after paint on top of the crystal solution how long i need to wait before cleaning? I'm trying to do a lexan rc body that is transparent and I need to be done from the inside part. So my plan is to start whit the crystal solution frist, when is all dry applied the color , need to be a full coverage usually take 3 layer , after I brush off the crystal solution and apply the final color so I can achieve the effect. Everything is done from the inside part of a transparent rc body made out of lexan. Your help will be much much appreciated. Thank you so much
Brilliant and clearly explained video!!!! Quick question, what temperature are you running your spray area at? Curious as mine took forever to dry!!!!! Lovely English October weather! Thanks.
Hi! Thanks for the videos! They are beneficial. Can you tell us what are the keys to get bigger cristal? I've been trying different quantities of urea and getting only small crystals.
Heads up, the link you posted for the wetting agent is not ox bile, it’s liquid latex liquid mask. I just tried mixing my own crystal effects and it does not work at all…. Haha it was an epic fail in my workshop, but luckily it was just a test piece
@@user-xf1yz9kg5c me either. No matter how much I stirred. The combo of liquids and urea did get might cold though. Maybe my ml to grams conversion was wrong?
@@nowyourefinished6481 i found a fix. Use hot water in a pan or bowl to heat the mixture within a container. Also use dish soap instead. What i did was i made the liquid saturated, filtered the extra ereum and added a little extra destilled water to the mixture. Make sure not to use it in a cold environment since the saturation is also based on the temperature. What i experienced is that it didn’t crystallize at too cold conditions. It just became one big mess. 20 degrees c with a window open gave me great results. Let me know if you need help
Im loving your videos! The urea on amazon is no longer available. There are several brands, all with different measurement numbers. Does it matter which urea we use? Do the numbers affect your recipe?
I appreciate the science behind this. Much appreciated. A friend showed me he had a kit to do this from the 90s and it was expensive.$$$$$ From house of kolor.
Oke i have tried everything but i just dont get the large crystals. I tried bio grade urea i have tried urea that they use for de-icing roads. I tried normal water and i tried distilled water. I have tried ox gall (which literally does do nothing) soap is king. One crucial thing and that is temperature. How warm is your item and what is the room temperature? How warm is the water ? These things are extremely important to get what you get. Can you explain per bullet point ? Such as water temp and room temp ?
Interesting I've seen diesel exhaust fluid spilled several times and it certainly dries in a crystalline structure... I almost wonder if you could just use def 😛
Hi Martin; I like very much your videos , they teach me a lot of things about customization. about cristal fx, I saw hundreds of videos and meany people use also soap in the mix, and use hot water too. have they something to see in the final fx result? thanks
Thank you for the explanation. I'm a little confused about the use of the wetting agent. According to the product links in your description, the agent is used for water based paints. However, I thought the Rust-Oleum paints you recommend in your description were epoxy/enamel based paints. Are they not? Or, is the repelling nature of the of the two part of what creates the effect?
You could also use jet dry I am sure. It is also a surfactant and does the same thing. I have never heard of the product he mentioned but I know we have jet dry on the dishwasher soap aisle in the US
Hello and thank you for your video.the water must be hot to dissolve the urea? I mixed the three elements but nothing works 😕.no crystal effect at all on my frame
Has too be hot outside from what I've experienced , cold weather or rainy weather and the effect doesn't seem to happen for me, but over 80 and sunny it crystallizes pretty quickly
I really hope i get this down one day! This method doesn't work for me, but if i add some dish soap it does. Maybe it's a bad wettner agent batch. Im 4 tries in, it hasn't been easy. I'm not getting deep crystals. Temperature really, really, really matters and it gets lost in the juxtaposition topics of the school portion. Sanding the helmet before adding the solution really, really, really matters.
Hello, in my country the most common urea i find is a fertilizer type with minimum 46% N content... is that good, or it has to be the 99.5 percent purity one?
Fun fact: urea, which is an organic compound and not a mineral, was the first natural organic compound to be synthesized from minerals only, debunking the vitalistic idea that there were fundamental differences between organic and non-organic matter
Hello sir, great video! Question for you? How long do you let the urea mixture dry on the helmet and how long do you let the black paint set up before wash. Thanks in advance
Hello, I love you videos, please can you help me with a question I have regarding the crystal effect. I would like to use this technique on a clear lexan polycarbonate Remote control car shell . However when painting these shells the paint is applied in the inside of the shell and once painting is completed a protective outer film is removed from the shell revealing the paint , this effectively is the clear coat so I wouldn’t have to do this part of your process. Please can you give me any advice on how you would attempt the crystal effect on this please. Thank you, Gary
How did you get the crystal solution to stick to the silver paint? Mine just keeps beading on the surface even sanding the paint with 800 grit and using that wetting agent you suggested. I even used dishwashing liquid.
@@anthony_trillanes The problem I had with dish soap is trying to get rid of the bubbles. You don't want those drying up on the surface of the part. I've had some luck with the crystals but often they didn't form how I like and they only formed were the solution stayed on the part. I think it also depends on the size of the part you are using. I think it works best on large parts with not alot of angles. But for now, I gave up on the project. I think the problem may be the silver paint. It does not let water stick to it. I watched the video again and he briefly mentioned he clearcoated it and wetsanded after. I will try that. Maybe the solution sticks to the sanded clearcoat better.
Hallo Martin, sehr schick der Helm, aber kannst du mir bitte sagen, ob das nicht auch mit fertigen Adblue machbar wäre? Die Konzentration liegt da bei ca.30% , eventuell zu wenig um schöne Kristalle zu bilden, gibt's dann nur einen weißen pudrigen Überzug? So long.
Hi. Total geil. Abo ist raus, nur bitte einmal in DEUTSCH. Ick bin 41, Englisch is ne weile her und das sieht total spannend aus. Ick möcht dit mal selber ausprobieren, bitte. Bin zwar Techniker und Handwerker, schraube aber in meiner Freizeit mega gern an meinem Mifa Bike rum und ne neue Lackierung wäre cool. Andere Frage: funktioniert das auch auf blacken Rahmen und wenn ja, danach einfach Klarlack drüber oder was macht Ihr dann? Danke Danke
@ETOE another question please. I tried the Crystal FX and it did work however I got super super tight crystals, same patten as on your helmet but imagine about 100-150x smaller. If by chance do you happen to know what can cause a a smaller pattern?
Muss der 2K Klarlack geschliffen werden bevor das Urea Gemisch aufgetupft wird? Oder ist der Zwischenschliff nötig für das nachfolgende Schwarz? Vielen Dank fur eine Antwort
Thanks, but the amazon link does not bring up the bag of crystals you have in the video. And they are out of stock. The suggested replacement is nit good.
that chalkboard diagram is art
Thanks mate.
WOW!!!!! BEAUTIFULLY DONE!! Best tutorial video on crystal fx ive EVER seen. Well done
I’ve found my new favourite UA-cam channel! Hilarious, informative, and artistic. Thanks Martin
Ich kann das angekündigte DIY Video, wo Du diesen Effekt auf einen Rahmen bringst, kaum erwarten. Wie immer geniales Video.
This effect gives me so many possible ideas about what I can do when I begin to repaint my '94 Super V 2000. Over then past years I've grown bored with the plain jane black and silver of the factory style paint I did on the bare frame. Can't wait for the next video to see what ideas it sparks .!!
Stunning - love the recent upgrade in production quality too - more in keeping with your immense talent.
I'm building a guitar soon and thought about this for a finish, this video basically has me convinced i can do it.
Fantastic explanation of the science behind the effect, and an excellent, simple demonstration of how this amazing effect is achieved. Subscribed! 😊
Thank you. You are welcome.
That is the best looking chalkboard i have ever seen, someone cares about what he does and has serious design skills...
What is he using to write?? Is that a chaulk pen?
Ochsengalle und Pipi?! Abgefahren! Vielen Dank für deine tollen Videos. Ohne viel Gelaber kommst du direkt zum Punkt. Davon sollten sich andere UA-camr eine fette Scheibe abschneiden! Weiter so und viel Erfolg!
Wonderful to see you back Martin, it has been a long summer without your videos 🎉❤
Nice one I used the crystal fx stuff years ago when it first came out I think I still have a bottle knocking around
Somewhere 👍love your work fellow custom painter great channel all the Dred fx custom paint
Amazing affect created from such a simple process, professor Martin indeed 💜😁
Dude your energy! Great info and chalk board rocks!
Ein absoluter geiler und gleichzeitig einfacher Effekt!!!
Das werde ich mal ausprobieren (die Spraydosen-Variante)
Wowwwwww u are such a talented guy why I can’t find anybody in America 🇺🇸 like u this is so heartbreaking 💔
I’m an absolute huge fan of the channel and you but we used this technique 26 years ago with House of color products.
Does he say he invented the method? Chill out.
very thankful for this video .
i am trying to do a crystal effect on my giant propel .
cant wait for your next crystal effect video !
Glad it was helpful!
Danke!! endlich mal eienr der das vernünftig zeit .. jetzt trau ich mich auch an mein Oldtimer ran mit dem Kristall dingsbums :D
As usual another great video that was amazing I really enjoyed watching that so easy I might give that a go cheers mate
Great to hear.
I wonder if it's possible to control the crystalline development? Using some of the urea crushed into powder and placed strategically for nucleation points might do it. And we're talking like individual granules.
Brilliant, and I loved your diagram!
Now I need to find a place to use this.
I appreciate you taking the time to explain this. As an artist I’m always on the lookout for new techniques. I’ve already seen it but could it be possible to just use DEF fluid instead?
I was wondering the same thing. I think it would be worth a try on a small scale like on a plastic tote or something just to try it.
Supernice! Haste wieder schön gemacht! Ich freu' mich auf nächste Woche. 🤪
HI, I wander how long the Urea-solution can be used? An hour- a day- 10 minutes? Is there a time limit for using the solution? Well done video !!
I just made a paint studio so I can re touch my 2003 540i BMW, I am serousily conserding doing this method for my car, it looks increiable! I might do more of a light blue under coat tho, just to match the original paint it came with.
Thank for video. So if I’m understanding, I will paint a base color, then clear it with 2 coats of 2k clear, sand it with 800 then put crystal liquid on it, then paint light black then sand with grey scotch pad? Then I’m assuming paint candy over then clear it ?
Nice videocclear explanation. Any advaci how to make a bigger crystalla ? A bit more urea or a bit less?? Thank you so much
More crystal solution on the product you like to paint
Thank you so much. I will give a try today . Very appreciate thanks a lots
Amazing work! What should I do for bigger crystals?
I have the same question !! I do everything you Said but the crystals was very smalls 😔
I've read that for bigger crystal patterns the liquid needs to dry slower. Perhaps yours is drying too fast?
OMG that green helmet looks wicked. Love 💕💕💕💕💕💕💕 it
I tried this method earlier though the urea solution wasn't sticking to the surface like yours does in the video, I know it works because the solution got in my gloves and crystallized, but on my test panel it would just slide right off, do you have any tips on what I could be doing wrong?
This is exactly what happens when I try too. Just like he does it in the video and it just beads up and flows off
Possibly too much wetting agent? Or not enough. 🤔
@@hankharper1229 mine went the same way
Try sanding the surface and following it up with a layer of primer
@@malhaar5880 tried sanding already makes 0 difference, and spraying primer over paint and/or clear is a no go
This so Superb
My old car needs a respray
Do you think I could do my whole car like this ?
You made this look easy and gave me confidence to test and see if I can do the car
I don't think you are able to do it. It needs a lot of experience to do large panels evenly in this style.
@@ETOE
I will practice and then give it a go
If it can be done ….. I will be able to do it
If not it will be candy cherry red all over
Never be afraid to try
@@DarkStar-wu9nqany update on this ?
Brilliant.....I'm going to experiment with this now I know it's so easy to do...PS, you are nuts 😉
Получилось?
Love the sense of humor
This is sick, really want to take the panels off my car and do this, would be much better then wraps and hydrodips.
These videos are amazing. Thank you. If I'm going for a white on white effect, how would I go about doing that? White base with an off white overtop, then clear coat? I'm trying to match a set of custom white wheels I'm ordering. Thanks!
White base with another white on top.
Hi great stuff and channel.
Can this be applied to any surface, such as plastic trim on cars.
Yes, absolutely
Do u spray the solution on wet paint or wait till dry
Very nice explanation.
Hi . I did try again but didn't work. My problem is when I go to clean the crystal whit water and soap , the crystal don't come off . So maybe I did spray to much paint on top of the crystal, I did 3 layer of paint , or maybe I wait to much time and let the paint dry to much on top of the crystal . So after paint on top of the crystal solution how long i need to wait before cleaning? I'm trying to do a lexan rc body that is transparent and I need to be done from the inside part. So my plan is to start whit the crystal solution frist, when is all dry applied the color , need to be a full coverage usually take 3 layer , after I brush off the crystal solution and apply the final color so I can achieve the effect. Everything is done from the inside part of a transparent rc body made out of lexan. Your help will be much much appreciated. Thank you so much
Brilliant and clearly explained video!!!! Quick question, what temperature are you running your spray area at? Curious as mine took forever to dry!!!!! Lovely English October weather! Thanks.
in summer plus 30 degree celcius in winter minus 10 degree celsius.
Great video and explanation !
Hi! Thanks for the videos! They are beneficial. Can you tell us what are the keys to get bigger cristal? I've been trying different quantities of urea and getting only small crystals.
A pump. Don't you know pump it up, you got to pump it up. Don't you know pump it up, you got to pump it up!
Pump it up? Im lost
Heads up, the link you posted for the wetting agent is not ox bile, it’s liquid latex liquid mask. I just tried mixing my own crystal effects and it does not work at all…. Haha it was an epic fail in my workshop, but luckily it was just a test piece
I think I got the same result, been scratching my head for days until saw this comment.
Nvm I got actual wetting agent I think but it didn't work at all for some reason :(
@@ygayovy did you figure it out? The urea wont mix with the water for me
@@user-xf1yz9kg5c me either. No matter how much I stirred. The combo of liquids and urea did get might cold though. Maybe my ml to grams conversion was wrong?
@@nowyourefinished6481 i found a fix. Use hot water in a pan or bowl to heat the mixture within a container. Also use dish soap instead. What i did was i made the liquid saturated, filtered the extra ereum and added a little extra destilled water to the mixture.
Make sure not to use it in a cold environment since the saturation is also based on the temperature. What i experienced is that it didn’t crystallize at too cold conditions.
It just became one big mess.
20 degrees c with a window open gave me great results.
Let me know if you need help
Do I add the wetting agent to the urea mixture or apply wetting agent to helmet first, then apply urea mixture
Very informative. I will be trying this for sure. What is the music please 🙏
Im loving your videos! The urea on amazon is no longer available. There are several brands, all with different measurement numbers. Does it matter which urea we use? Do the numbers affect your recipe?
Hi
Do you need another layer of clear coat over it, or it depends on the paint you use?
I would like to try it on a car!? :)
Freue mich auf jedes Video - geniale Arbeit und noch genialere Witze!!
I appreciate the science behind this. Much appreciated. A friend showed me he had a kit to do this from the 90s and it was expensive.$$$$$ From house of kolor.
Great video. Does this method leave a texture?
No
Oke i have tried everything but i just dont get the large crystals. I tried bio grade urea i have tried urea that they use for de-icing roads.
I tried normal water and i tried distilled water.
I have tried ox gall (which literally does do nothing) soap is king.
One crucial thing and that is temperature.
How warm is your item and what is the room temperature? How warm is the water ? These things are extremely important to get what you get.
Can you explain per bullet point ? Such as water temp and room temp ?
Interesting I've seen diesel exhaust fluid spilled several times and it certainly dries in a crystalline structure... I almost wonder if you could just use def 😛
Once again another awesome video
Hi Martin; I like very much your videos , they teach me a lot of things about customization. about cristal fx, I saw hundreds of videos and meany people use also soap in the mix, and use hot water too. have they something to see in the final fx result? thanks
maan .... you won my respect
Thank you for the explanation. I'm a little confused about the use of the wetting agent. According to the product links in your description, the agent is used for water based paints. However, I thought the Rust-Oleum paints you recommend in your description were epoxy/enamel based paints. Are they not? Or, is the repelling nature of the of the two part of what creates the effect?
You don't mix the wetting agent in the rustoleum color. You mix it in the distilled water which should be water-based.
You could also use jet dry I am sure. It is also a surfactant and does the same thing. I have never heard of the product he mentioned but I know we have jet dry on the dishwasher soap aisle in the US
My first thought was, desilled water and urea is it AD-blue you are talking about?
damn man, this is crazy, You can write with both hands :) nice
Yes I can.
high ammounts of UREAH is also found in DEF, or DIESEL EXHAUST FLUID for those regen systems.
wahou, excatly what i want to do.. but on glasses. Is it work on tempered glasse ? like table.
Hello and thank you for your video.the water must be hot to dissolve the urea? I mixed the three elements but nothing works 😕.no crystal effect at all on my frame
Has too be hot outside from what I've experienced , cold weather or rainy weather and the effect doesn't seem to happen for me, but over 80 and sunny it crystallizes pretty quickly
Can the crystal fx solution give you the same effect over water based acrylic paints? Like art paints
I really hope i get this down one day! This method doesn't work for me, but if i add some dish soap it does. Maybe it's a bad wettner agent batch. Im 4 tries in, it hasn't been easy. I'm not getting deep crystals. Temperature really, really, really matters and it gets lost in the juxtaposition topics of the school portion. Sanding the helmet before adding the solution really, really, really matters.
Temperature cold or hot the best ?
Wonder if you could use DEF fluid as it's pretty much the same and when drys creates crystals
Hello, in my country the most common urea i find is a fertilizer type with minimum 46% N content... is that good, or it has to be the 99.5 percent purity one?
Fun fact: urea, which is an organic compound and not a mineral, was the first natural organic compound to be synthesized from minerals only, debunking the vitalistic idea that there were fundamental differences between organic and non-organic matter
True.
Hello sir, great video! Question for you? How long do you let the urea mixture dry on the helmet and how long do you let the black paint set up before wash. Thanks in advance
20 minutes and 10 minutes.
Is it a special kind of orea… Can you use the kind you use when it’s showing 😊
Now, I don’t know the ratios, and maybe I’m an idiot, but distilled water and urea; Isn’t that just DEF for diesel engines?
lol no
@@joeprinsen1717 my bad, it’s actually 67.5 percent de-ionized water and 32.5 percent high grade urea.
Yes it is
What's that?
@@DB.scale.models what's that?
is this urea a firtilizer..?
plese answer me..
Hi.. i want to paint my Helmet gold and black. Whats the better mix? Gold firts then black or the other way?
The ideia is to get more black than gold!
I think first gold, next crystal paint next black color. You must experience different varieties
Thanks for the opinion
that turned out very nice
Hello, I love you videos, please can you help me with a question I have regarding the crystal effect.
I would like to use this technique on a clear lexan polycarbonate Remote control car shell . However when painting these shells the paint is applied in the inside of the shell and once painting is completed a protective outer film is removed from the shell revealing the paint , this effectively is the clear coat so I wouldn’t have to do this part of your process. Please can you give me any advice on how you would attempt the crystal effect on this please. Thank you, Gary
Crystal FX solution first, black spray paint second. Remove the crystals, spray silver. Done.
@@ETOE thank you , I am grateful
Hello good day do you have substitutes for the wetting agent? (Oxgall) it isnt available in my my country
Sorry for the trouble.
Thank you
You can use dish soap.A couple drops.
Thank you. 😊@@moses4031
Or try jet dry. The liquid made to put in dishwashers. It is the same type of product (surfactant).
What did you use for the gold in the intro of this video?
should you put finish clear at the end? I might try red and yellow
If you want to keep it longer then yes.
It is possible to make crystal effect paint in colors for camouflage?? For a stock o an bow? Thanks.
I wonder if you can use Borax in water to get a different crystal effect.
This dudes awesome 🎉🎉😂😂😂
nice work Etoe!!!!!
Nice work 😊👍🏻👍🏻
Great video , thanks
This would look really nice on my tank and fenders...
How did you get the crystal solution to stick to the silver paint? Mine just keeps beading on the surface even sanding the paint with 800 grit and using that wetting agent you suggested. I even used dishwashing liquid.
Same issue any solution? I tried dish soap and it works but not getting good crystals
@@anthony_trillanes The problem I had with dish soap is trying to get rid of the bubbles. You don't want those drying up on the surface of the part.
I've had some luck with the crystals but often they didn't form how I like and they only formed were the solution stayed on the part. I think it also depends on the size of the part you are using. I think it works best on large parts with not alot of angles. But for now, I gave up on the project.
I think the problem may be the silver paint. It does not let water stick to it. I watched the video again and he briefly mentioned he clearcoated it and wetsanded after. I will try that. Maybe the solution sticks to the sanded clearcoat better.
Does anyone know if you can use de-ionised water instead of dislilled in this process ? Thanks.
Strike that, I found that making distilled water is easy and free.
Very cool , thanks for the info. Do u use an .80 tip on your Iwata guns ?
I use all nozzles available.
1 QUESTION. Do i need a pond for this project.
Hallo Martin, sehr schick der Helm, aber kannst du mir bitte sagen, ob das nicht auch mit fertigen Adblue machbar wäre?
Die Konzentration liegt da bei ca.30% , eventuell zu wenig um schöne Kristalle zu bilden, gibt's dann nur einen weißen pudrigen Überzug? So long.
Yes you can use adblue as well but it costs more per gallon.
This was awesome!
Hi. Total geil. Abo ist raus, nur bitte einmal in DEUTSCH. Ick bin 41, Englisch is ne weile her und das sieht total spannend aus. Ick möcht dit mal selber ausprobieren, bitte. Bin zwar Techniker und Handwerker, schraube aber in meiner Freizeit mega gern an meinem Mifa Bike rum und ne neue Lackierung wäre cool. Andere Frage: funktioniert das auch auf blacken Rahmen und wenn ja, danach einfach Klarlack drüber oder was macht Ihr dann? Danke Danke
That is amazing and thanks for link in EU 😉
When you mix it do you have to boil the water in One video i see you have to boil it do you have to
@ETOE in the thumbnail for this vid. What colour and product is the Candy Green that is used?
Thanks in advance Martin
@ETOE another question please. I tried the Crystal FX and it did work however I got super super tight crystals, same patten as on your helmet but imagine about 100-150x smaller. If by chance do you happen to know what can cause a a smaller pattern?
Muss der 2K Klarlack geschliffen werden bevor das Urea Gemisch aufgetupft wird? Oder ist der Zwischenschliff nötig für das nachfolgende Schwarz?
Vielen Dank fur eine Antwort
Nichts muss, alles kann. Außer sterben natürlich.
Whats means of ox pile idont undrestand?
Will this work with water based acrylics? Or only solvent paints?
It does but you need more experience in doing it.
What is the name of the product inside the bottle?
One question. Is there a shelf life on the crystal formula after it is mixed?
No
Thanks, but the amazon link does not bring up the bag of crystals you have in the video. And they are out of stock. The suggested replacement is nit good.
If i use soap I should still do a 2% mixture?