Should The Riser Be In Back Or On Top Of Tread - Assembly And Stair Squeaking Noise Problems

www.homebuildi... Click on this link to learn more about stair building, home remodeling and construction problems. This video will provide a few more reasons why or how stair squeaks or noise while walking up and down stairs might be eliminated by installing the risers on top of tread instead of behind it. Share you opinions with us on the subject and maybe we can find an inexpensive solution to this age old stair building problem.

[@timleture2566]

Well done. Properly and professionally explained and entirely accurate.

[@stairbuilding]

Awesome and thanks for the kind words.

[@scottwright388]

I did service calls for awhile for a stair manufacturer, and over 90% of my calls was for squeaky stairs. Most were 36" to 42" out to out boxed both stairs. I convinced my company to make some changes, that made a huge difference. One problem is on carpeted stairs, I discovered that the carpet guys were knocking the risers loose from the tread with their kicker. Another problem was that the riser wedges were falling out because of the glue they were using. Also, most squeaks on boxed stairs, was coming from the ends of the risers, and I devised a way to run screws into the risers and stringers, at an angle without removing the carpet...I sure made a lot of homeowners happy back then.

[@stairbuilding]

Very good point and the stairs you're referring to for viewers can called housed stringer or routered out stairs that usually don't have a stringer in the middle. Correct me if I'm wrong.

[@Ranger42]

Awesome instructional video. Answered all my questions. TY

[@stairbuilding]

Great to hear!

[@MrTcheema85]

Hi, is it ok to leave little gap between the tread and the top and bottom of the riser to eliminate the squeak if you have rough stairs.

[@SamDavies-mj2lf]

Thank you, this video was really helpful as to why our stair might be squeaking! On our stair the risers are on top of the treads, but we cannot get behind the stairs to fix them. Any suggestions?

[@stairbuilding]

I do have more videos on fixing squeaking stairs here - www.homebuildingandrepairs.com/repairs/stair/index.html

[@JediMasterFO]

I missed the answer. Riser behind tread or on top of tread?

[@syuill3444]

Behind tread

[@tylere.8436]

Idealy there should be 4 stringers instead of 3 and use pl premium on the gaps. These alone would eliminate any creaking of flex on the treads.

[@MaxKoedding-bl4mg]

Riser goes on tread. The riser supports the stair nose above all across the tread, making sagging less over time.

[@scubacat7279]

SO what is your preference??? Riser sitting on top of the tread???

[@stairbuilding]

I like to install riser first and then treads. Thicker treads can help.

[@Mostviews111]

Glue is your friend when it comes to wood on wood contact.

[@mgloxahatchee]

all of the stairs I do are solid concrete sub base no way to fasten so i do tread first with adhesive

[@ortofoncape]

Notched into the riser with glue only