We Tear Down Ed’s Golden Nugget Rokon Motorcycle
Вставка
- Опубліковано 8 сер 2024
- Robby and crew take apart the Rokon to get it ready for sandblasting and powder coat.
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton.com
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #goldennugget #mattsoffroadrecovery - Авто та транспорт
Brushed finish would be closer to the factory look, polished wouldn't last long in the dirt, and it's ugly when scratched and scuffed. Great jobs guys.. Dinners the man!!
I agree. I think shining up the wheels will take away from the gold frame. All eyes should be on the Gold.
@@Alconium YEP BRUSHED ALUM SEEMS MORE AUTHENIC....JUST LIKE ED
Agreed, don't over-bling it.Brush it.
THIS!!!
might be nice to etch a small message on that aluminum?
Ed looks like a real practical kind of guy. He's going to go through mud and water. Just keep it with a new factory look. Clean the wheels and coat the tires with some shine. Don't put "polish wheels" on his to do list.
I guarantee 'polish Rokon wheels' will never be on Ed's To Do.
These guy's mission is to give Ed the nicest gift they possibly can. They have no expectations of any of this staying in pristine condition, but they do it this way anyway because that's just how they do.
It's also great advertising for their regular work.
@@mircomuntener4643 I with you 100% , It's a work bike . There are a lot out there calling for polish and I thought I'd put my two cents in . In my opinion polish wheels don't fit the bike . Once you start polishing aluminum, you take away the protective oxidation , you are no longer wash and wear.
@@Robalo-2660 truckers near me, including log truck drivers, routinely give their trucks a periodic show shine that includes polishing the alcoa wheels, then go right back to work.
Those wheels will re-patina right back to how they are, and everyone's fine with that.
Polished aluminium looks fantastic, if only for a little while. Way better than chrome.
So little is removed, nobody is harming snything to polish it, and all the over the top cosmetic work is just for the moment of presentation. Everything that happens after that is just whatever it ends up being.
Everyone involved with this project has ensured that the fundamentals, the function, safety, and preservation of every component come first, then they're going over the top on cosmetics and upgrades.
And that's ok.
@@mircomuntener4643 I don't disagree with you , I've got Alcoas on my 97 Gmc dually , this is the second set . I keep my polished and waxed and at my age, I'm 71, it starts to be a chore . I just don't think Ed would want his bike " all chromed out" . Robbie asked for my opinion that's it . Case closed ,
Exactly my thoughts!
Seeing that "Slip Spring" sure brought Me back some Memories as GE washers used one in there transmissions fro Agitate to Spin cycles As well as Westinghouse. Replaced many of them in My Appliance Servicing Days in the 60's & 70's. Loved the story Ed told.
As far as restoring the Golden Nugget and the Rokon goes, you guys at Robby Laytons do the most extensive detail work and spare no expense to make these vehicles look so great. The other people who handle the fabrication and mechanical aspects of these projects don't hold a candle to what you guys have contributed. The work quality that your team provides is gratifying to watch and much appreciated.
I love the polished look. BUT, if you do the rims you probably need to polish more of the other aluminum parts just so the wheels don't look out of place. In this case I think brushed aluminum rims would look better.
jewel it
I am pleased to see you put the original trailer hitch I sent on Ed's Rokon, thank you.
I think a nice, even, very fine, blasted finish on the aluminum wheel discs would look more original, old school and also not show scratches as easily, as I see most people have said they agree with. I think Ed would like all of that taken having been taken into consideration on his Rokon.
jewel the aluminum wheels
Thank you @RLN for all that you're doing for Ed (and everything else you do on your channel)! I love seeing how to do things the correct way (not the lazy/fast way). Your team at RLN is the best! 😃
I vote No on the polished wheels question. I think a brushed satin would fit the overall vibe (and purpose) better.
I would go with a bead blasted finish.
Agree 100%
I also agree 100% on not polishing. I would suggest spinning them somehow and taking like 180 grit sandpaper to them
I say polish the wheels
Engine turning (aka jewelling) would look sweet.
Sand and acid etch the wheels. Maybe a matte clear coat . They are just going to get scuffed if used accordingly.
What I like the most about watching the several off-road Fab / building shops near and around Hurricane Nevada is if you guys all have great love for each other. You show it by the love You are giving Ed.
I can’t wait to see the moment Ed sees what you all have done for him!! I’m so happy for him already.
No to polishing the rims. It’s not a show bike. Ed’s going to use it for what it was built for. Polished won’t look good once it’s been run through the gravel and muck. I can’t see Ed wanting to spend time re-polishing on a regular basis. Great job overall. Can’t wait to see more progress!
Yeah, if it's polished, Edd will scratch it up, but, that's the point. Edd has his memories of how he used the Rockon in the past. This is a new beginning, the new scratches will document what he will do in the future. The bike doesn't bless the man, it's the man that will bless the bike.
Everyone involved in this project is making UA-cam history. I've never seen such collaboration on a single (3 piece) project being done for one man. Ed is going to love the results of everyone's hard work. As for the wheels, do whatever you guys want to. Much love and respect to all, and God bless you and yours.
Agreed. The ultimate collab. Let’s hope they finish the project before Ed has the energy and mobility to enjoy it. 🤞🏽
@@ewxlt Given the bit of delay in getting the vids spaced out and published, we're probably only days away from wrapping it all up by this point. Maybe two more weeks at the most I'd think...
Nice work!! Getting that Rokon taken apart... it's getting so close to the finale. I'm getting excited to see it presented to Ed!! You guys (everyone who is part of the whole Nugget and Rokon package) are absolutely AWESOME!!!!!
Visited robby today, grabbed some merch. Absolute genuine down to earth dude. Thanks for gifting us some of your time robby.
When it comes to strapping things down, my father always said, "No one has ever lost a load, because they used one strap too many, but, many a load was lost, because they used one strap to few!"
It’s all winding down, looking forward to the Reveal, Ed will certainly Love it.
If he lives long enough……
Yes polish everything! Everyone wants it back to Ed ASAP but maybe during paint down time you can do the wheels! HB and Robby taking apart the bike show how great y'all work together!
So glad you guys are so detail oriented and will fix the loose ends on the Rokon. Not a shiny fan but buffing the aluminum wheels up seems really rad. you guys rock!
Would love to see a LED headlight swap for increased output and lowered power consumption
As long as it looked close to the original.
That truly is a GREAT idea for a useful, more practical, power-saving, gas-saving, modern upgrade to Ed's Rokon that would definitely benefit him in several ways.
Brushed finish on the wheels. Polish would look great but doesn’t seem like it fits a rokon. This has been so cool watching the progress on Ed’s stuff. Nice work all!!
Make the wheels shine. just one more detail......you all have made such an effort to make everything so nice for Ed. Love the attention to all the little details. KEEP UP THE EXELLENT WORK.
It's great to listen to Ed and his tail's his excitement, thanks for bringing us along, all the best to yous and your loved ones
8:39 I say no. A nice clean satin finish is the way to go. Thanks for the upload.
Cracked fork full of water, split u-joint boot, broken engine guard, pivots "lubricated by rusty water" - B&B missed a lot of basic items while clowning around. Don't polish the wheels to mirror shiny, just clean them up or try to keep the original finish. It's a work bike, not a Harley. If funds allow, I think Rokon has a sealed replacement U-joint.
I don’t think much of B&B.
@@Mr7yhnmki8 agreed
They were too busy figuring out what bible verse to needlessly inject into their videos. Lol
@@RyanBorger he who misseth thy broken fork musth meet thy maker in haste. Forketh failurus verse 1.
B&B dropped the ball for sure!
You and your team absolutely rock it. Ed is going to be blown away when everything is finished. Kudos guys.
Because of this series I bought a Rokon on eBay. Same model from 1968 and even yellow. It is arriving in five days and I haven’t slept since. Thanks Ed‼️
I vote to clean but not polish the wheels. I would guess that's the way Ed remembers it.
You should do a bead blast finish on those wheels. Polishing them would be too flashy for an Off-road bike. Every little scratch would be extremely obvious on a mirror polished wheel & even riding it through tall grass would scratch that aluminum.
jewel it
How much intense off-road riding are you expecting Ed to honestly do on that bike ?
POLISH THEM WHEELS!!!!!!!!!!!!!! You have done everything else show quality why stop now! Details are everything! Keep up the great work. 👍
I hope our buddy Ed lives to see all the love the crews have given to this project!!!
If I may please recommended that you use the GripLockTies. I've estimated the Rokon's main frame tube to be 3" so a 12" tie should work well. They are reusable, rubber lined and can handle temperatures up to 210° F. They were designed for aviation and racing.
That would be the proper way that I was taught when I got my degree in small engine and marine technologies.
That is tough call. The rokon is a work bike and Ed is much older now. I think that polishing the wheel will require constant maintenance and I don’t believe Ed will have the time for that. I would leave it as brush aluminum so that the maintenance to not as high. Just my though though.
Great video! Thanks for the update. You folks are amazing mechanics and craftsmen
I'd go with vapor blast or slurry blast for the rims. It leaves a good-looking utilitarian surface that won't age as poorly as a high polish.
I am loving this series with Matt’s, Fab Rats, you and so many others on fixing Ed’s stuff. Ed is going to love all what you all did for him.
Exciting!🤗
Don't take this the wrong way, but I kinda like the original patina. Seems a shame to erase all the scratches, that I'm sure have many stories.
As it's going to be apart of the golden nugget set peice, it should match the nugget also👍
Though I understand why you are asking, I reckon everyone just wants to see Ed reaction soon as possible. Good luck and thanks🙂
I was surprised you didn't powered coat the trailer in the first place😉
Yeah but it's going to match the Nugget and the trailer anyway!
You should be able to get a new boot for the split one on the u-joint, those u-joints are just hardened steel with no needle bearings in them so keeping them greased and clean is vital, I have a 1975 Rokon Scout that I did a frame off restoration. Keep up the good work.
Brush polish would look great, more stock looking. Great work to all and everything you have done for Ed
I'm so emotionally involved in this entire Ed surprise 😅 ever since they dragged the Golden Nugget out of the bush I've been waiting for Ed to drive it again 😅
I actually think only the frame an tank should be gold. The fenders and all the parts that will get banged up should be black. Aluminum wheels just need to be brought back to new mill finish aluminum. Not polished.
Agreed!
Agreed 👍
Agree
Listen to these people, that's the best plan for Ed!
Just got my piece of the golden nugget in the mail. I get so stoked when I get a new video notification on Ed’s builds.
Use 3M Roloc Bristle Brush 2'' Yellow 80 Grit to put a series of round circles. By using a drill and putting downward pressure on the brush, you can make a perfect circle. Move the buffer over and create another. I can send you a picture if you’re interested.
Dave
Polish them I think that would look amazing with the fresh paint
Yesss! It’s Rokon time! Big shout out to team Robbie for all the teams hard work 🤗
Nice slip Robby - definitely don't want to relive 2020. You guys do an awesome job!!
I think you need to shine those rims!!
Can’t wait to see the finished product!
Shine up those rims. You guys are too cool. Thanks for taking the time to make these videos. I'm excited for Ed. I live in St. George and hope to see his complete setup someday.
I would do a brushed look on the wheels. Polished is just to much work to keep looking nice, especially for a trail rig.
Ohh man... Ed Smile when he heard you rode his ride.
very cool. can't wait to see him see it.
Can't wait to see edd ride his bike .
I agree with hillbilly the wheels need to be sanded and polished so they shine .plus that shine reflecting the beautiful paint will look killer !
All those involved in this project are amazing! I can't wait to see the video when all this is presented to Ed. I think when i am ready to retire (could be any day at this point) I need to move towards Utah and have me a jeep build and hang out with all you folks. Keep up the great videos and the things you do for everyone.
All the good things that are happening for ED ,. I hope when the time comes that Ed makes it too the presentation of everything that's been happening for him. I don't know how old Ed is, but I would be considering having things pretty much set up for him before too long of time because sometimes things can get a little bit shorter as time goes on. And I would feel really bad if it all fell apart for you guys. We love him just as much as you do, and you're all our celebrities.
Right? It would be heartbreaking if things took so long and something like that happens.
I feel the same way. This project seems like it taking forever. Ed isn't getting any younger.
I've driven past your shop many, many times on my way to the bow hunt each August and now that I'm one of your subscribers, I'm going to stop in and buy some merchandise and hopefully meet you!
Omg you guys and your pointed outtro lmao! Love your work and I’m excited to see this whole thing come together seeing the golden nugget towing nugget jr behind it on the custom trailer will be an awesome reveal. Mad love guys
On the subject of zip ties, for those that don't know, the white ones are for indoor use, and the black ones are for outdoors as they have UV protection.
When in doubt follow that rule but they do make white uv zip ties
Can't wait for the next instalment . Really want to see Ed get his toys back.
Love your show! love the content!!! I've been watching The Golden Nugget build from the start and just caught this video today. The GOLD seat on that Rokon just ain't cutting it. Not enough contrast imo! Keep up the good work!!!
A little late commenting, but we think(my husband and I) that the Rokon wheels should definitely be polished! Everything else about it, the trailer, and the golden nugget are looking amazing. Polished wheels will dress the Rokon up and make it look amazing too!
If it were mine, I wouldn't polish the wheels. Those scratches will stand out more, and if the trails don't scratch them my tire irons would.
NO!! do not make the wheels shine. It was never intended to look like a silver tea set or look like a signaling mirror going thru the woods. It's a back woods machine.
I agree, and that's not Ed's style. He doesn't care about shiny.
Well Said. Make it so.
Absolutely need to see those wheels shine!
Running the tank dry for storage may work in a dry climate, but it is death in a humid climate. The tank will suck in moisture during the day/night temperature cycles and rust the inside of the tank. Where I live we try to store bikes for winter with a tank full to the brim and treated with Stabil or similar. This minimizes the space that can suck in moist air and rust. Also, leaving the carb float bowl full helps keep the seals from drying out.
You all have got to get this project done soon. Ed’s going to fossilize before he sees his old jeep and bike again. Good work of course.
This large of a project takes time . Try to do what they have done in the time they have taken and I bet you can't even come close to being half way finished to the level of perfect that golden nugget is
Been saying the same thing for months. Ed is elderly and he is fading as we speak. Had some relatives decide they were going to do some upgrades to an elderly member of our family. Got her moved into a condo while they went to work. After many changes and basically taking the place down to the studs she up and died. If they would've simply did the heating and ac, carpet appliances, roof and other odds and ends, she could have enjoyed the last two years in comfort. In things ,like this time is not on your side.
ya Ed is not looking as good as he did when this started...sure hope he can do more then just look at it when it's done
@@gmcman355crazy doesn’t really matter what they do in how much time if the old man never gets to see it.
HEY Dinner Do you know where captain hook got his hook from? The second hand store.
I agree that Ed is going to use this Rokon as it was designed, so I don’t think I would spend the time to polish them…but I think they would look awesome powder coated to match the theme of the other two pieces. It’s all going to look so awesome when finished. I love that you have such an eye and commitment to even the smallest of details. I first came across the golden nugget in Matt’s rescue and followed it Fab Rats and then to your garage. I also stumbled across Bikes and Beards…These four channels are the only ones I’ve cared enough about to subscribe to…I think what you guys are doing for Ed is awesome.
Robby, you and your team have truly put the Nugget and now the Rocon as top priority. Once you have gotten each you finish the unit at top priority speed with the highest quality. You should be proud of your team and yourself. Now if someone could please put a fire under Fab Rat to do the same. Fab Rat doesn't appear to have the drive to finish the Nugget like you did. I just want to see Ed get his things back while he is still on this side of the dirt. Thanks for Your great effort and the dedication of your team. You guys and the wife are Outstanding!!!
Brushed wheels would look the best IMHO. Great job guys!
Those wheels are ment to go just about anywhere I think leaving them how they are would be better cuz the polish will get messed up anyway when Ed goes to his mine with it.
What a grand effort by so many skilled professionals. Nice wort everyone!
you guys are great! I like the idea of polishing the wheels. I dont think they will see much of resal dirt anymore under Ed!
Ed's Rocon has alot of little parts I'm certain y'all get it back together, the smile on Ed's face talking about his bike is priceless, no on the polished wheels Ed will be on his claim in rough territory with the Rocon, great video ❤😉👍
jewel it
I had a friend who had a gold Trans Am - it had gold honeycomb rims from the factory. Looked great but eventually those rims rot away and fall apart. He had that happen and he stuck on some shiny Cragar's - totally ruined the look of that car. No shiny chrome rims on gold vehicles - ever!
Hi i'm Drew, I like to comment above, "black and gold" five spoke honeycomb that, the most Golden Nugget inspired design.
😯😯 my face when Robby gave us a sneak peak at Matt’s wrecker when his channel is behind haha
What l like about Robby that he doesn’t missed any damage or paint damage
It’s like no room for errors.
Leave the wheels as is. They weren't meant to bling. Also, the trailer was fine. Unless there was a functional issue with it should have been left alone. I hope you didn't cave because some internet whiners had a problem w/ it.
it looked like they had issues with the paint chipping on the trailer in a bunch of spots
@@austinh1028 I get that. I just hope they don't change it up. It was looking tight.
It would have been a great comment if you didn't go douche at the end with your "internet whiners". It kinda made you sound like one!!
@@EarlofBaltimore hoping the same colors, minus the chips!
@@austinh1028 yeah looked like it had gone rusty up front as well. 👍🏽😎
If you're going to brush or polish the wheels, be sure to clear coat them afterwards to help keep them shiny. Ed isn't going to have the time or energy to spend all day polishing stuff, and the clear will also help keep the dirt from building up in the brushed finish as well.
jewel the aluminum wheels
Hay Robbie when I use to motor cycles I use to use a product called Semi Crome not sure where to get it but it shined up the Aluminum I don't know how well it will work on the wheels EDS bike but I think it will turn out great. The stuff I use to use came in tube and a little goes a long way. Good luck thanks Ray 😊
Need to call the rokon A picker The golden nugget and the picker Keep up the good work guys
Obviously it would look great all polished and matching the nugget, but....
Ask Ed what HE wants to use it for, and finish accordingly:)
I sure he wants to use it, and not just look at it;)
It'll be as immaculate as the rest of the outfit, far too good to take off road but he'll probably do it anyway!
well...he did say put pontoons on it and drive it across the lake
@@madkow007 haha yes he did😄
After reading some 560 comments largely advocating polishing the wheels or clear coating them, I say the wheels new were probably fairly shiny, but NOT highly polished. I suggest hand polish with aluminum wheel cleaner, not buff. Ed was excitedly talking about taking it to his mine. Not taking it to shows. It will be beautiful enough. Diamonds and gold will sparkle on a woman. But both together do not make her beautiful.
You guys are awesome! Polish them for sure.
B polish, kinda make sense to make them look as all other re painted parts. soo it will look like new.
you doing amazing job guys !!!!
Can't wait to see this all back on Ed's hands! Gonna be an awesome day!! 🥰🥰
Can't decide on the wheels...polished would look cool, but not sure if would fit the overall theme of all the nugget build. I'm thinking black might be better? 🤔
Either way, I know you guys will have it looking amazing!! 👍👍👏👏
As a previous owner of a '66 Rokon pretty much exactly like Ed's, don't polish the rims. Ed's going to feel bad enough when he roasts the sides of the Golden Nugget against rocks and trees.
Excellent point!
This shouldn’t be a shiny poser mobile, it is a tool he uses as intended. Don’t make it something he won’t use. Keep the wheels as is.
Good progress on Ed's Rokon, guys. I think Bikes and Beards might want to plan a trip around the time it gets painted. Not doubting you guys, just an observation, since they liked the Rokon so much, they may wanna work on it one more time!!!😉🤙
Polish the aluminum with "Busches" aluminum polish. Use a used scotchbright pad to clean and apply the polish. I used that on my Goldwing MC rims and they shined like chrome!
I'd say leave the rims alone, or powdercoat them argent silver...they dont need to be shiny
DON'T polish the wheel. It'll scratch right up, which will make it look in worse condition that it is. Keep the brushed original look.
jewel the aluminum wheels
I say yes to polishing wheels, super easy to clean and looks mint
Yes please... Polished like a mirror 😍
Leave the wheels alone. They were dull when new.
While it would only take a couple hours to polish those wheels to a mirror finish and it would look way too cool. If the bike were going out on display only, I would say yes, but since your rebuilding it to be used, a good clean up should cover it.
jewel the aluminum wheels
Really help Ed and make it a three Weller (not as young as he once was). Love The thought going on.
It’s always cool to watch you guys enjoy want you do. This reveal to Ed will really be something. Matt has his work cut out for him how to do it 😇
Everyone's saying polish the rims but I think that's a big mistake. Look at who you're building this for, does Ed seem like a flashy kind of guy to you? No. This is an off road machine, give that man something he can ride through the sand and the muck. Restore the aluminum to its original finish but that's it.
I agree. Ed is not a flashy kind of guy.
Cerakote the rims....
Shiny is better
Fr. Clean it up and sand it with high grit so it has a clean matte finish
Brushed Aluminium please.
Two schools of thought. 1. Polished aluminum would be pure eye candy! 2. On the other hand, Ed used to use it to hunt. Flashing his prey animals would not due well for a hunting trip. I would suggest black as the complimentary color. I would covertly find out Ed's plans. He may not hunt anymore but on the other hand, he may not hunt any less. Since the purpose is to please Ed. some more sneakiness may be in order. The seam would apply to the chromed parts. What a conundrum. A show piece or a "go" piece?
Yeah good idea:) I'm for a "go" piece, though everyone loves a show piece;)
It will be a trailer queen, too good for the bush and rocks.
10:47 dinners laugh in the background lol that should be a ringtone dinner lol
Yes on the polish. If it doesn't look nice, paint them or rough them up again