I've had Hasbro Consumer Care completely replace Transformers figures in the past when I've complained about faults(Not even breakage ) and they send me new figures sometimes without even sending back the faulty figure. Who knows ? May be they would do the same for Beyblades ? Although I am wondering if they would , since the nature of Beyblade is they are more likely to break than an action figure because of the forces invovled in battle. Well if they are serious about bringing BeyBlade back , I hope they have decent consumer support on getting replacements when they are at fault , like they do with their action figures.
Honestly this generation needs more planning and time if it is to be efficient in the long run. Another issue with these X beys is that their tabs which lock onto the ratchets can break a shitton and stress a lot.
One thing to help its burst resistance is to take off the bit first, then the ratchet. The ratchet would last a lot longer, and that goes for all types.
I do that, but the main issue with burst resistance and rachets is with the rotating plastic outer ring because when it gets beat up in battle, it bends it out of shape and makes it looser. There could be an internal issue with rachets, but i dont know, and the beys burst from force being applied to its rachet bumps.
@@UnshakableThug1it’s actually the white part of the ratchet. Iit bends and losens over time if it bursts too much. Try taking the ratchet apart and straighten the white part un and it should prevent it from bursting a lot
Ye it would be hard for me to be an X consumer without resellers selling parts. I want to buy 2 point bits and a LeonClaw blade but Premier doesn't want to sell them individually yet 😔
Some parts will and others won't. Some parts are almost always good but if you look at the progression of the series the first set of parts usually don't stay competitive as they need to sell the new stuff so they make it better than what we have now. Which is exactly why we need part packs like you said. Or heck, even put an extra bit in the pack so that if it breaks the bey isn't unplayable!@@UnshakableThug1
But also QuadBurst from Hasbro is not too good, I would say that's the worst gen. At least now you can see they 'try' to do the same as Takara, even if they don't reach that level hahahaha. But quadburst from hasbro looks like aliexpress even the graphics on the bey
@@SilverFlame. I'm a tournament player so i stick with authentic parts. It's also in tournament rules that your parts must be from official sellers. That sounds interesting for fun tho
@@SilverFlame. The thing about X is that if you play constantly your parts are eventually going to break. I know 3 of my tips broke from complete luck in battle, and 1 of my knight shields and wizard arrows have actual crack breakage in their metal.
Interesting.. Its seems like i've dodged most of these issues so far. Im pretty sure Hasbro uses softer plastic so there wont be as many breaks like this.
Ye, we await Hasbro's take on X! Hopefully, they will watch X content to be better than TT and will implement the battle pass, but that's wishful thinking 🤣
i believe most of the bit breakage is from very new beys where the bit is stationary rather than rotating with the gear chip as a means of protecting both the bit and the bey’s spin when it hits the xtreme line too fast or harshly, i usually give new ones soft launches to break them in so that the feature works properly and with that all my bits are fine so far
With every single KnightShield blade I own, I noticed that my string launcher tends to shake about 95% of the time I launch a beyblade with said blade. This doesn't happen with other blades. I fear that launching KnightShield enough times will cause the launcher to break.
That's strange. I only use ripcord launchers, and i dont think i notice anything weird with KnightShield. I personally think you dont need string launchers in X tho.
Knight shield is an off balance blade to balance its roundness, the shaking, for me anyway, hasnt damaged my launchers, ripcord or string, its just smth thats mildly annoying
Another update on beyblade x durability, my leon claw launcher broke and another hellssythe blade of mine broke and launcher grip and my brothers wizard arrow is broken. I’m starting to consider quitting Beyblade
Oh man... just to reassure you, my HellsSythe is broke! Chips of metal are gone, and there's big crack down the metal, which is why i have beys i train with and beys i use for tournaments!
But couldn't that theoretically mean Hasbro was right all along to make the beyblade burst season 3-7 plastic instead of metal? And we hated them for that?! Because if metal and high speed can cause such fat damage to the point where we can be anime villains and LITERALLY break beys beyond repair...
I've already started custom making my own bits, still experimenting with the resin mixtures for weight/durability replication but so far they fit the ratchets. Gonna stress test everything with some abusive battles and see what it takes to break the prototypes I already have.
No, i actually like the burst mechanic. It's a buff for attack types, and it's silly! The problem is how fragile the parts are and there's no part packs to replace them!
I mean when the bits are made of plastic and the main gimmick is to have the tips eat at the corners of the stadium its no wonder their breaking so easily, also as much as the burst gimmick was fun for its time I just wish it wasn't in this generation period, the bursting is fun for the moment, but as time goes on it becomes a major problem for people who don't have the money to constantly buy replacements
Yeah, im noticing my rachets get loose over time, to the point they shouldn't be used in competitive. I've disassembled them to try to tighten them, but it seems impossible unless u alter them. Even more reason to have part packs.
Oh no my flat recently became less flat, hopefully they fix these wear issues do to constant high speed impact with maybe better materials in the long run
I couldn’t get into burst or X because of these same concerns and I’m sad to see that they were founded. The durability of metal fusion, metal masters, etc. is legendary and I know because toys I played with as a kid became legitimate competitive tools for me in tournaments later on. I still have my original earth eagle, TT gravity destroyer, and hasbro meteo L drago
Beyblades from the metal saga are more durable in my experience. Since they’re made out of mostly medal they don’t break as often as Burst and Beyblade X beys do. I still have my Phantom Orion BD and Variares DD that I bought in 2013 and they both are working fine despite using them for over 11 years.
@@marcamusprime9513 I wonder what the innovation could be, but i like the simplicity of the designs. Also, so far 2 of my blades have broke and i got to say it's a headache since i used them as training dummies, so they've had lots of use and now i gotta replace them.
Even when collecting the designes themselfes are preety bland and sometimes boring, the bits especialy, since you cant make one with a cool gimick since the required height for the whole xtreme dash thing to work, so stuff like z achillies driver is literaly impossible to recreate in x
One quick problem I always had with X is, how are they gonna expand on it? In Burst just by the designs of the beys alone there was a ton of room for expansion. Adding gimmicks to the parts, layer changes, disc frames, so on so forth. But the problem with X going back to basic designs and one big gimmick, while refreshing, holds back what they can really do with it in the future. At least how I see it.
Ye i remember my Hasbro Rock Leone Energy Ring breaking, and i feel like the WD tips would shave off after awhile, while my TT WDs stayed sharp. Also, i saw that Hasbro Metal Fury lacked mode switching, among other issues 😒
💯🔥🔥🔥Great video! thanks for sharing your broken parts and stuff, not enough beytubers showing there's but i've heard a little about the breaking issues. i really hope hasbro makes good stuff (all the way through the generation)
Thanks for watching! This needs to be shown more and breaks happen to me the most since i play and lab combos ALOT because i go to tournaments frequently. and hopefully Hasbro does go crazy, but i doubt it 😓
Okay breaking is just unlucky, i had a bit break because i launched directly on top, not because of its weakness. I use my beys every single day every second. And after that incident, i learned and it never happened again. Just my experience, you seem to be uber unlucky
bro with hasbro i got my chain incendio, green arrow wizard dual pack and my high taper broke within 4 battles. The tip is know a tyranno beat rip off now 💀
I think this is largely bad luck. I still haven’t broken a part. I expect to have to replace things in the future but so far at least for me everything has held up fine.
It is definitely bad luck for bits, but i play a lot, and so far, i have about 7 broken bits and 5 broken rachets. I should mention i deem a part broken if i wouldn't use it in a practice setting, which would be broken rachets and rachets that are too loose from battle or bits with big scrapes or how they were broke in the video.
@@UnshakableThug1 yeah I think maybe I have a couple 3-60 that are getting close but thankfully there’s so many recycled ratchets in releases I’m not super worried about it. But also beyblade is one of the few battling hobbies outside of Japan and for whatever reason there is expectation to never have to replace parts. I think if you look at it like mini4wd or any other competitive hobby like this it kind of puts it into perspective. I just expect that I will have to replace stuff.
They should have stuck to hybrid, 4d and zero-G designs tbh. The burst feature while looking cool, makes the beys more prone to wear and tear. I mean, the only way to burst a metal saga bey was to manage and break a facebolt while it was still planted in there.
Honestly I really havent had any of these problems. Mine have been unintentionally launched on floors, hit on walls, and nothing has broke so fa. The battles are fun as usual and i rlly enjoy it. Tbh what ya’ll probably get are first batches, which normally have the most flaws. I wait a couple of weeks till i get mine. I wouldnt say this is happening to mostly everyone either. Some plastic can get weaker in different temperatures, and from experience, break easier in smaller stadiums. However, school and other activities keep me busy so i rarely use them.
Does Takara Tomy strengthen batches in X? I do play X A LOT so i think breakages like these will just happen eventually to everyone. My bx17 wizard arrow broke yesterday and its the bey i mainly use as a training dummy so im not surprised, i also notice there were cracks in its blade. I posted the damage in a recent community post.
@@UnshakableThug1 well that’s rlly how products like these actually work. Some batches may have abnormalities due to improper molding of the plastic or even the metal. Air bubles could get stuck, therefore making it weaker. It also happens with transformer products aswell.
My needles dent so easily, just one heavy hit that gets them out of the stadium and the sharp ain't sharp no more, one turned into basically quake from burst
@@fencer0Z damn, would reccommend buying something flat and soft to lay your stadium on. There are gaming mousepads like the aqua control plus that have a size of 500mm x 500mm and 4mm of thickness, which makes it softer and it fits under a stadium and is far better for your parts to land on.
if theres something you like to run, stack it deep.... im pretty salty i had to stop running rush when i saw another player's rush bit piece on the floor at the last tournament i was at...
I get the breakage thing but it’s bound to happen with the new gimmick. Plus since the big thing about this gen in that it’s “burst and metal fusion combined” it makes it more likely. I get the frustration though since a lot of these beyblades are genuinely expensive. I bought myself two but haven’t tried them yet so I hope this type of thing doesn’t occur since without the launchers and just the two booster boxes (1 beyblade per box) cost me 40 bucks.
Attack bits have more burst resistance than defense or stamina, even after wear. The fact that they're so tight is new to compensate for the wear. IDK how your bits got broken; they should burst if they get hit too hard to avoid damage, or you have gorilla strength or something
@UnshakableThug1 you can get 3d printed bit replacements, I would just superglue it. I have about 20 beys haven't happened to me yet. Maybe a bad batch
My biggest issue with beyblade x is the fact that I just got back into beyblade by coming across a bunch of clearance quad strike beys, and in order to adopt the new style of bey, then I need to obsolete my brand new (albeit not the greatest) tops. I do have a few Takara Tomy beys and a pro series as well.
I've got 3D models for 3-60 and 4-60 (I intend to model 1-60, 5-60, and 9-60. I dont own a 2-XX or a 7-XX, so I cant model them). I also have models for all the Bits except for Glide, Trans Point, Metal Needle, Rubber Accel, or Bound Spike. I use 3D printed Ratchets and Bits for at-home games and only use real parts at tournaments. I just want to preserve my real parts.
Snapped parts are exactly why the burst mechanic shouldn’t have returned. We already have a new way to score points with extreme finish, so there’s absolutely no need to include childish burst finishes. It just adds another facet of pure luck which beyblade absolutely does not need.
it just is how it is, the game is 2 METAL spinning tops at high speed smackin into one another and shooting around the room sometimes. Paying for two beys is annoying but its always been if u dont want it to break or become worn then u have to buy another one for your collection as well. a lot of parts are cheap to replace and its not as if beyblade x beys dont last AT ALL, they simply are under more stress and recieve more damage than they probably should sometimes.
They won't do parts like you mention, as that's how they get ppl to mass buy those booster packs for the prize bey and the parts. think back to Burst series, how many spammed so they can get their hands on Atomic etc very strong part, if they can just buy atomic directly no one will buy the boosters
Although currently theres no part in X that i view as highly sought after. Kobalt Drake is the rarest part, but i dont think it's an amazing part, despite the performance I've seen when Zankye put Rush on it, but i know i dont need it to win a tournament, as I've went to 3 and got 2nd place twice. So currently, i dont think any part is amazing enough to be in a gacha.
To be frank tho i don't expect the beys and parts to last forever with the speed and crazy design and part breakage happens with all Gens. Yeah part breakage does suck but their not a new issue. You know? While adding durability to anything is a good thing and only adds benefits they are eventually still gonna break with the crazy speed and recoil of X.
@@sleepycCh Understandable. Even in X bursting is mostly luck but the game balance in X is nothing like past gens, which is its main interest to me, so i'm fine with buying parts if their affordable. For example, Flat beats stamina tips, while Taper, which is X's Semi Flat, can beat stamina tips but is weak to stamina and is far better at beating defense.
lol, Takara tommy be like: "you want specific parts? here gacha it yourself at the booster pack or buy the same bey" either way its more money for them
LOL. I heard someone broke their burst tip cause they used it on concrete 😅 but so far 2 Knight Shields, 1 Wizard Arrow, and 1 Hells Sythe have broke for me, and it was just plain battle wear. I noticed that the breaks start as cracks and then as you battle more, the cracks become bigger so every X blade is a ticking time bomb for replacement, but it seems attack blades are more sturdy cause their metal is thicker.
My experience with X they’ve been really durable I call hypocrisy to judge x durability on rare breaks but give burst a slide when it has the worst durability compared to other gens
Well, the breaks i have aren't rare. The bits in my video all broke within a few battles of use and 2 of my 4-80s broke in the same way. But yea burst has worse breaks but i'm not a burst fan anyway.
@@UnshakableThug1 dang that sucks man takara tomy really needs to fix the durability for beyblade x in general I'm glade it is not as bad as burst but still also three of my x beys just broke so now I'm rethinking my investment in this new gen,because I'm not trying to relive the amount of money i wasted on burst
@@giovonniiclayton Jeez, 3? I'm sorry for your loss, this ge nis expensive. So far 1 of my Wizard Arrows and Knight Shield Broke, so i'm expecting they have issues that will lead to them eventually breaking. I notice my Wizard had cracks in it.
I know this might be seen as a SIN, but have you ever considered trying out KO Beyblade X? It would be interesting to see if they are worse, on par, or even BETTER when it comes to durability.
Yeah... thats what happens. I am super excited for this... not anymore 😢 I am a broke ass adult and i was so close to splurging on this on my credit. Thank god this video showed up. Thanks. Maybe when i am less broke and have extra cash. Waiting for that christmas bonus...
The hasbro pro series was allright. Maybe 1 gram or 2 off weight but Maintains all features and gimmicks. It was the non pro series that had a complete lack of all gimmicks. Hollowed out parts and No teeth for bursting, The pro series was "worse" than takara but it was basically the same Mold using a slightly different plastic which i presume was cheaper
They really should have gone with Mattel instead of Hasbro. Mattel revamped Megablocks into Mega Constructs with plastic and chrome plating and prints that are better than lego is. They'd be able to make plastic better than Hasbro. But since Hasbro has history, Hasbro probably just said something like : "Hey beyblade since we know each other so well, I'll do it this cheap"
Really? I'll be honest, I know it's an issue, but I've personally never had anything break. Guess I play my shit a bit weaker haha! Sucks to hear that tho, part breakage sucks. I agree with the beat up ratchets thing tho, they burst so much easier.
@@Average.lifter I did point out that Japan is much cheaper, but even then some parts are in gacha packs, and that alone is bad, but it's worse with breakable parts
@@UnshakableThug1 clearly with the prize beys you need to be extra careful, but i like that. Displaying cobalt drake or fight with him ruining it...i like that materialistic dilemma
I've had Hasbro Consumer Care completely replace Transformers figures in the past when I've complained about faults(Not even breakage ) and they send me new figures sometimes without even sending back the faulty figure.
Who knows ? May be they would do the same for Beyblades ? Although I am wondering if they would , since the nature of Beyblade is they are more likely to break than an action figure because of the forces invovled in battle.
Well if they are serious about bringing BeyBlade back , I hope they have decent consumer support on getting replacements when they are at fault , like they do with their action figures.
I never knew this about Hasbro, That's crazy. This does lift my hopes for a better beyblade X! Btw sus name 😂
Honestly this generation needs more planning and time if it is to be efficient in the long run. Another issue with these X beys is that their tabs which lock onto the ratchets can break a shitton and stress a lot.
Oh yeah! I saw a tab break once in a video and now that i'm looking at my knight shield i see the stress marks 😭😭
@@UnshakableThug1 zamak metal and high speed battles do not mix my guy.
@@RyujinSaviorX Damn, how did you find out the metal that's used???
@@UnshakableThug1 friend’s family who works with metal can identify the types. Its literally the same metal used for MFB as well
Cool! I guess this is another way metal fight came back 🤣
With metal on metal and such high speed fights its bound to happen
One thing to help its burst resistance is to take off the bit first, then the ratchet. The ratchet would last a lot longer, and that goes for all types.
I do that, but the main issue with burst resistance and rachets is with the rotating plastic outer ring because when it gets beat up in battle, it bends it out of shape and makes it looser. There could be an internal issue with rachets, but i dont know, and the beys burst from force being applied to its rachet bumps.
@@UnshakableThug1it’s actually the white part of the ratchet. Iit bends and losens over time if it bursts too much. Try taking the ratchet apart and straighten the white part un and it should prevent it from bursting a lot
@@BrodyG-uv3nq I'll try that!!
@@UnshakableThug1 nice. Just be carefull and avoid using a lot of pressure. Dont want it to break😢
@@BrodyG-uv3nq hopefully they fix this in the future. Adding some metal to the inside of the ratchet should help
As a wise man once said “The game’s the game.” Thankfully all the resellers I’ve encountered maintain a supply of individual bits and ratchets.
Ye it would be hard for me to be an X consumer without resellers selling parts. I want to buy 2 point bits and a LeonClaw blade but Premier doesn't want to sell them individually yet 😔
What website do you use?
Durability is a major issue with this gen. I know stuff is gonna phase out as it gets outclassed but it makes me feel uneasy about the series.
I hope things don't phase out, and to me it seems like parts like flat and ball won't be obsolete to the gear bits, hopefully.
Some parts will and others won't. Some parts are almost always good but if you look at the progression of the series the first set of parts usually don't stay competitive as they need to sell the new stuff so they make it better than what we have now. Which is exactly why we need part packs like you said. Or heck, even put an extra bit in the pack so that if it breaks the bey isn't unplayable!@@UnshakableThug1
@@danthewildbirdman Well said!
But also QuadBurst from Hasbro is not too good, I would say that's the worst gen. At least now you can see they 'try' to do the same as Takara, even if they don't reach that level hahahaha. But quadburst from hasbro looks like aliexpress even the graphics on the bey
Goes from broken parts to habro bullying and I’m with it
Hasbro had it coming! 👿 They better deliver for X❗️
I have good news
Don't forget the string launcher also problematic. The gear is always stuck.
Dang, i don't use it 😂
@@SilverFlame. I'm a tournament player so i stick with authentic parts. It's also in tournament rules that your parts must be from official sellers. That sounds interesting for fun tho
@@SilverFlame. The thing about X is that if you play constantly your parts are eventually going to break. I know 3 of my tips broke from complete luck in battle, and 1 of my knight shields and wizard arrows have actual crack breakage in their metal.
Interesting.. Its seems like i've dodged most of these issues so far. Im pretty sure Hasbro uses softer plastic so there wont be as many breaks like this.
Ye, we await Hasbro's take on X! Hopefully, they will watch X content to be better than TT and will implement the battle pass, but that's wishful thinking 🤣
i believe most of the bit breakage is from very new beys where the bit is stationary rather than rotating with the gear chip as a means of protecting both the bit and the bey’s spin when it hits the xtreme line too fast or harshly, i usually give new ones soft launches to break them in so that the feature works properly and with that all my bits are fine so far
Beyblade x goes in hard shredding hasbro plastic
i died at the angry parent impersonation 🤣
I'm glad 🤣, i hope it wasn't too cringe.
Lore accurate beyblades
4:51 Damn, you hit the nail on the head buddy! plus the other proposals you made 🔥🔥🔥🔥
I try to keep it 💯🫡
With every single KnightShield blade I own, I noticed that my string launcher tends to shake about 95% of the time I launch a beyblade with said blade. This doesn't happen with other blades. I fear that launching KnightShield enough times will cause the launcher to break.
That's strange. I only use ripcord launchers, and i dont think i notice anything weird with KnightShield. I personally think you dont need string launchers in X tho.
Knight shield is an off balance blade to balance its roundness, the shaking, for me anyway, hasnt damaged my launchers, ripcord or string, its just smth thats mildly annoying
Another update on beyblade x durability, my leon claw launcher broke and another hellssythe blade of mine broke and launcher grip and my brothers wizard arrow is broken. I’m starting to consider quitting Beyblade
how to overcome this. buy fake beyblade at 3 dollars get spare parts.... OR cast in resin the parts to get extras.
Careful buying fakes some of them use lead in the metal!!
If there molded that’s a big problem molded metal breaks easier than say hand made or forged
I can see them tying to reinforce parts with high breakage rates with metal
Now I don't wanna test battle my hell's scythe...
Oh man... just to reassure you, my HellsSythe is broke! Chips of metal are gone, and there's big crack down the metal, which is why i have beys i train with and beys i use for tournaments!
You know if TT is having this problem imagine Hasbro when they release theres
Hopefully Hasbro can improve this
But couldn't that theoretically mean Hasbro was right all along to make the beyblade burst season 3-7 plastic instead of metal? And we hated them for that?! Because if metal and high speed can cause such fat damage to the point where we can be anime villains and LITERALLY break beys beyond repair...
The removed all gimmicks and fun not just metal also all metal was hidden behind plastic so it doesn't matter
We got robbed of zero g season 2
I heard it didn't do well in Japan. Rest in piece, Zero G🪦
*you need to buy multiple beys!!!
1. Training/Practice bey
2. Staples bey/parts
3. Tournament bey
4. Collector bey
5. Repeat 💸💸💸💸
The beyblade cycle 💀
Beyblade X needs less recolor's and more unique designs.
True, i would say 3 is enough but Wizard Arrow has like 5 now 💀
Metal fight had lots of recolors
@@makinyoumad9498 If you combine Hasbro and TT sure, but in Hasbro recolors were low while TT had many
@@UnshakableThug1 Same with Burst gen
TT became Hasbro
I've already started custom making my own bits, still experimenting with the resin mixtures for weight/durability replication but so far they fit the ratchets. Gonna stress test everything with some abusive battles and see what it takes to break the prototypes I already have.
So basically Beyblade X's biggest problem is Beyblade Burst... Very funny, but I agree. Burst should've never been a thing.
No, i actually like the burst mechanic. It's a buff for attack types, and it's silly! The problem is how fragile the parts are and there's no part packs to replace them!
How on Earth do you watch the video and come to that conclusion
I mean when the bits are made of plastic and the main gimmick is to have the tips eat at the corners of the stadium its no wonder their breaking so easily, also as much as the burst gimmick was fun for its time I just wish it wasn't in this generation period, the bursting is fun for the moment, but as time goes on it becomes a major problem for people who don't have the money to constantly buy replacements
Yeah, im noticing my rachets get loose over time, to the point they shouldn't be used in competitive. I've disassembled them to try to tighten them, but it seems impossible unless u alter them. Even more reason to have part packs.
Oh no my flat recently became less flat, hopefully they fix these wear issues do to constant high speed impact with maybe better materials in the long run
I couldn’t get into burst or X because of these same concerns and I’m sad to see that they were founded. The durability of metal fusion, metal masters, etc. is legendary and I know because toys I played with as a kid became legitimate competitive tools for me in tournaments later on. I still have my original earth eagle, TT gravity destroyer, and hasbro meteo L drago
Time for full metal!
Beyblades from the metal saga are more durable in my experience. Since they’re made out of mostly medal they don’t break as often as Burst and Beyblade X beys do. I still have my Phantom Orion BD and Variares DD that I bought in 2013 and they both are working fine despite using them for over 11 years.
That is the issue with all metal beys. This series feels more like collecting more than playing
Gaawwd 😭 you're not wrong
@@marcamusprime9513 I wonder what the innovation could be, but i like the simplicity of the designs. Also, so far 2 of my blades have broke and i got to say it's a headache since i used them as training dummies, so they've had lots of use and now i gotta replace them.
especialy with burst plastic
Even when collecting the designes themselfes are preety bland and sometimes boring, the bits especialy, since you cant make one with a cool gimick since the required height for the whole xtreme dash thing to work, so stuff like z achillies driver is literaly impossible to recreate in x
The metal blade on my BX-07 dransword broke in half somehow recently, still surprised about it
That's really unexpected and sucks 😦 . My BX-17 Wizard and BX-14 Knight broke
One quick problem I always had with X is, how are they gonna expand on it? In Burst just by the designs of the beys alone there was a ton of room for expansion. Adding gimmicks to the parts, layer changes, disc frames, so on so forth. But the problem with X going back to basic designs and one big gimmick, while refreshing, holds back what they can really do with it in the future. At least how I see it.
Hasbro use weak plastic that's what happened with Burst Pro and Metal fight😊
Ye i remember my Hasbro Rock Leone Energy Ring breaking, and i feel like the WD tips would shave off after awhile, while my TT WDs stayed sharp. Also, i saw that Hasbro Metal Fury lacked mode switching, among other issues 😒
@@UnshakableThug1 Yes hasbro be lazy.
But sometimes they making good and bad,
Look up Metal Fury Hyperblades just like Burst Pro Series.🤔
@@phantomV630ye true, kinda sucks tho, some call it a round 2 cash grab 😔
@@phantomV630 and legends
Oh yeah, i remember my legends galaxy pegasus' rubber tip was too hard to flower pattern, so i wonder if it was plastic LOL
💯🔥🔥🔥Great video! thanks for sharing your broken parts and stuff, not enough beytubers showing there's but i've heard a little about the breaking issues. i really hope hasbro makes good stuff (all the way through the generation)
Thanks for watching! This needs to be shown more and breaks happen to me the most since i play and lab combos ALOT because i go to tournaments frequently. and hopefully Hasbro does go crazy, but i doubt it 😓
Okay breaking is just unlucky, i had a bit break because i launched directly on top, not because of its weakness. I use my beys every single day every second. And after that incident, i learned and it never happened again. Just my experience, you seem to be uber unlucky
bro with hasbro i got my chain incendio, green arrow wizard dual pack and my high taper broke within 4 battles. The tip is know a tyranno beat rip off now 💀
Actually I use fake point bits in local tournaments
👏 Mods! Crush this guy's fake point bits👆 💫 (lowtiergod reference)
I think this is largely bad luck. I still haven’t broken a part. I expect to have to replace things in the future but so far at least for me everything has held up fine.
It is definitely bad luck for bits, but i play a lot, and so far, i have about 7 broken bits and 5 broken rachets. I should mention i deem a part broken if i wouldn't use it in a practice setting, which would be broken rachets and rachets that are too loose from battle or bits with big scrapes or how they were broke in the video.
@@UnshakableThug1 yeah I think maybe I have a couple 3-60 that are getting close but thankfully there’s so many recycled ratchets in releases I’m not super worried about it. But also beyblade is one of the few battling hobbies outside of Japan and for whatever reason there is expectation to never have to replace parts. I think if you look at it like mini4wd or any other competitive hobby like this it kind of puts it into perspective. I just expect that I will have to replace stuff.
Ye, maybe TT knows this and just wants us to buy more beys, but i think it would be more profitable to make rachet&bit part packs.
@@UnshakableThug1 maybe they’ll do that
Metal Series was peak Beyblade.
I think beyblade x is pretty cool but unfortunately the beys seem like theyre fighting against the stadium more than each other.
It be like that sometimes. If you optimally launch each bit, it will reduce how much the stadium sabotages you!
They should have stuck to hybrid, 4d and zero-G designs tbh. The burst feature while looking cool, makes the beys more prone to wear and tear.
I mean, the only way to burst a metal saga bey was to manage and break a facebolt while it was still planted in there.
Honestly I really havent had any of these problems. Mine have been unintentionally launched on floors, hit on walls, and nothing has broke so fa. The battles are fun as usual and i rlly enjoy it. Tbh what ya’ll probably get are first batches, which normally have the most flaws. I wait a couple of weeks till i get mine. I wouldnt say this is happening to mostly everyone either. Some plastic can get weaker in different temperatures, and from experience, break easier in smaller stadiums. However, school and other activities keep me busy so i rarely use them.
Does Takara Tomy strengthen batches in X? I do play X A LOT so i think breakages like these will just happen eventually to everyone. My bx17 wizard arrow broke yesterday and its the bey i mainly use as a training dummy so im not surprised, i also notice there were cracks in its blade. I posted the damage in a recent community post.
@@UnshakableThug1 well that’s rlly how products like these actually work. Some batches may have abnormalities due to improper molding of the plastic or even the metal. Air bubles could get stuck, therefore making it weaker. It also happens with transformer products aswell.
My needles dent so easily, just one heavy hit that gets them out of the stadium and the sharp ain't sharp no more, one turned into basically quake from burst
Ye the beys can land out the pockets hard. I play on a carpet, do you?
@@UnshakableThug1 I play on a table and have no carpets at home, they sometimes end in the other side of the room with really big hits
@@fencer0Z damn, would reccommend buying something flat and soft to lay your stadium on. There are gaming mousepads like the aqua control plus that have a size of 500mm x 500mm and 4mm of thickness, which makes it softer and it fits under a stadium and is far better for your parts to land on.
@@UnshakableThug1 the problem is they don't just get out of the stadium, they literally fly to the other side of the room
@@fencer0Z ye it happens. If you can, i would play on the floor to lessen fall damage and buy a soft surface to have under the stadium pockets
I was fighting my friend and his low flat just chipped offed but from my battles and his our beys don’t actually break
You have to play enough and maybe with more strength to see these breaks happen. I know at a tournament, someones blade broke mid game.
if theres something you like to run, stack it deep.... im pretty salty i had to stop running rush when i saw another player's rush bit piece on the floor at the last tournament i was at...
i haven’t had a bit or rachet break yet. i’ve had some pretty ridiculous battles too. Am i lucky?
honestly if this situation is not resolved in the future ill just buy a fake beyblade x since they are cheaper 💀
LMAO cant blame ya
@@UnshakableThug1doesn’t MQ contain zero lead now?
@@BladerKev I wouldn't know since i don't buy midfakes, but I would like to know how they compare.
Isnt a beyblade x only 8 dollars tho?
I didn't get anything this heavy, but one of my buts was hit by a blade and has a dent now, it's incredibly bad for lad
I feel ya 😭
I get the breakage thing but it’s bound to happen with the new gimmick. Plus since the big thing about this gen in that it’s “burst and metal fusion combined” it makes it more likely. I get the frustration though since a lot of these beyblades are genuinely expensive. I bought myself two but haven’t tried them yet so I hope this type of thing doesn’t occur since without the launchers and just the two booster boxes (1 beyblade per box) cost me 40 bucks.
Ye at least hasbro is finally here
another problem is the battle length. every battle last like 15 seconds and then ends. what???
LMAO, so true. But it makes tournaments faster, so im not complaining
That's actually better, in burst era 2 minute defense/stamina battles were soo annoying
And honestly 10-20 seconds is just enough for a bey battle
when Hasbro Quad Drive beys are More durable than Takara Tomy's offerings in the fancy new Beyblade X...
This is why we need metal sega coming back
My problem is how loose the damn launchers are for being so powerful
As someone who only owns Leon claw im scared it took me a while to get Leon claw
I've had Leon Claw for a while now, and it seems to be sturdy, so dont worry about replacing it!
W guilty gear references
U a real one ❗💯
Attack bits have more burst resistance than defense or stamina, even after wear. The fact that they're so tight is new to compensate for the wear. IDK how your bits got broken; they should burst if they get hit too hard to avoid damage, or you have gorilla strength or something
I'm not even a strong guy but this type of breakage has also happened to me in tournament.
@UnshakableThug1 you can get 3d printed bit replacements, I would just superglue it. I have about 20 beys haven't happened to me yet. Maybe a bad batch
My biggest issue with beyblade x is the fact that I just got back into beyblade by coming across a bunch of clearance quad strike beys, and in order to adopt the new style of bey, then I need to obsolete my brand new (albeit not the greatest) tops. I do have a few Takara Tomy beys and a pro series as well.
Welp, Hasbro screwed you over for releasing the final batch of burst while X is going on 🤦♂️💀. TT was already done with burst.
I've got 3D models for 3-60 and 4-60 (I intend to model 1-60, 5-60, and 9-60. I dont own a 2-XX or a 7-XX, so I cant model them). I also have models for all the Bits except for Glide, Trans Point, Metal Needle, Rubber Accel, or Bound Spike.
I use 3D printed Ratchets and Bits for at-home games and only use real parts at tournaments. I just want to preserve my real parts.
Do you have a model of LF bit? My LF broke exactly like the UA-camr. If you don’t can you tell me how I can make a 3D model of it?
More beyblade batles with memes that was sooooooo cool
I've seen people 3D print these bits. I don't know about their performance tho.
I just bought my first set of beyblade x beys…. Now I’m worried
Say goodbye to ya money 😈💸
Snapped parts are exactly why the burst mechanic shouldn’t have returned. We already have a new way to score points with extreme finish, so there’s absolutely no need to include childish burst finishes. It just adds another facet of pure luck which beyblade absolutely does not need.
I feel like the 1 upside of burst is that it's a buff for attack types, and trust me, it comes in clutch in tournaments!
The same thing literally happened with my DranSword 😭😭🙏🙏
I literally have no problems a couplecracks but thats expected
Trust me, cracks get worse 😞
it just is how it is, the game is 2 METAL spinning tops at high speed smackin into one another and shooting around the room sometimes.
Paying for two beys is annoying but its always been if u dont want it to break or become worn then u have to buy another one for your collection as well. a lot of parts are cheap to replace and its not as if beyblade x beys dont last AT ALL, they simply are under more stress and recieve more damage than they probably should sometimes.
Unlucky... haven't had any problems with mine... had them for weeks now
They won't do parts like you mention, as that's how they get ppl to mass buy those booster packs for the prize bey and the parts. think back to Burst series, how many spammed so they can get their hands on Atomic etc very strong part, if they can just buy atomic directly no one will buy the boosters
Yea, that sucks 😔. Gacha just couldn't stay out of the only toy series i like 😭
Although currently theres no part in X that i view as highly sought after. Kobalt Drake is the rarest part, but i dont think it's an amazing part, despite the performance I've seen when Zankye put Rush on it, but i know i dont need it to win a tournament, as I've went to 3 and got 2nd place twice. So currently, i dont think any part is amazing enough to be in a gacha.
@@UnshakableThug1 we can only hope. At least for once the stadium design favours attack type. It's been hard for attack types for so long
@@Bersilus Ye man, this is the best attacks types have ever been. I run them in tournaments and do great! Plus they're fun.
Can anyone tell me what game is being played on screen?
Valorant. Just as a warning, i think you'll enjoy Apex Legends more.
How to fix Beyblade X: Play metal fight
LMAO the GG references. Who do you main?
SOL BADGUY 😂
I really hope they sell packs of bits and ratchets eventually
To be frank tho i don't expect the beys and parts to last forever with the speed and crazy design and part breakage happens with all Gens. Yeah part breakage does suck but their not a new issue. You know? While adding durability to anything is a good thing and only adds benefits they are eventually still gonna break with the crazy speed and recoil of X.
True, this is the most Xtreme (I'm so funny haha) breakage I've expirenciend, but TT should've at least made part packs if they knew this.
@@UnshakableThug1 Fair point
I stopped using my rush cause you can’t buy the bit by its self it’s annoying
Ye i feel ya, i want a point bit 😔
Metal Fury remains the best beyblade series. It’s peak beyblade and it’s not going to get before than that
I gotta disagree. X is the best gamewise, but MFB is the best in art and nostalgia. But i do think if X wasn't here, the hybrid wheel system is peek.
@@UnshakableThug1 I dunno. I prefer the simple stop spinning or arena out loss conditions. And I’m not too fond of broken parts.
Hmm NO
@@sleepycCh Understandable. Even in X bursting is mostly luck but the game balance in X is nothing like past gens, which is its main interest to me, so i'm fine with buying parts if their affordable. For example, Flat beats stamina tips, while Taper, which is X's Semi Flat, can beat stamina tips but is weak to stamina and is far better at beating defense.
PLEASE HASBRO LISTEN TO THIS GUY!!!!!!
Takara tomy should stop and remanufacture old plastic beys
LOL
Come on now, we want the lore acurate beyblade battles, beyblade destruction is a feature
Lol, im imagining a blade shattering mid battle
@@UnshakableThug1 that what I want to see, like when in the show the beyblades crack
lol, Takara tommy be like: "you want specific parts? here gacha it yourself at the booster pack or buy the same bey" either way its more money for them
TT be on that pack fr 🚬
i think at this point we could probably rely better on 3d printers honestly
Just imagine. The surprise BX release. The Takara Tomy 3D bit and rachet printer 😂
The BIGGEST PROBLEM in this video is the sound effects that are way too loud. Still a good video nonetheless
Ah damn 😂, i know i made the glass shattering sfx loud on purpose, but were the beginning sounds too loud?
Most of the time they break because people choose to battle them againts metal fight beys or just freaking rocks
LOL. I heard someone broke their burst tip cause they used it on concrete 😅 but so far 2 Knight Shields, 1 Wizard Arrow, and 1 Hells Sythe have broke for me, and it was just plain battle wear. I noticed that the breaks start as cracks and then as you battle more, the cracks become bigger so every X blade is a ticking time bomb for replacement, but it seems attack blades are more sturdy cause their metal is thicker.
@UnshakableThug1 You shouldn't launch them too hard, sometimes launching them with less power gives you the win
@@makinyoumad9498 I don't know about that. Stamina is important for all beys
Yeah beyblade premier had my dragoon storm that i bought from them such good quality the difference between them is ridiculous.
wait a second so TT is not going worldwide? its still hasbro?
Yep, still hasbro. They made an announcement.
@@UnshakableThug1 guess i can order TT stuff now, at least they are cheap this time
I think burst should of continued its not as competitive but can be if people still want it to be and also the designs look amazing
I wish everyone could have their favorite gen, but i have the opposite opinion of burst designs 😭
My experience with X they’ve been really durable I call hypocrisy to judge x durability on rare breaks but give burst a slide when it has the worst durability compared to other gens
Well, the breaks i have aren't rare. The bits in my video all broke within a few battles of use and 2 of my 4-80s broke in the same way. But yea burst has worse breaks but i'm not a burst fan anyway.
@@UnshakableThug1 dang that sucks man takara tomy really needs to fix the durability for beyblade x in general I'm glade it is not as bad as burst but still also three of my x beys just broke so now I'm rethinking my investment in this new gen,because I'm not trying to relive the amount of money i wasted on burst
@@giovonniiclayton Jeez, 3? I'm sorry for your loss, this ge nis expensive. So far 1 of my Wizard Arrows and Knight Shield Broke, so i'm expecting they have issues that will lead to them eventually breaking. I notice my Wizard had cracks in it.
I know this might be seen as a SIN, but have you ever considered trying out KO Beyblade X? It would be interesting to see if they are worse, on par, or even BETTER when it comes to durability.
I have never heard of this way of play, could you explain it?! I'm guessing it's using X in bb-10s?
Never in my life have I seen this happen
Yeah... thats what happens. I am super excited for this... not anymore 😢
I am a broke ass adult and i was so close to splurging on this on my credit. Thank god this video showed up.
Thanks. Maybe when i am less broke and have extra cash. Waiting for that christmas bonus...
I'm glad i helped 🤠 👍
@@UnshakableThug1 thanks! I am super tempted but yeaaah unless I got extra moolah. Sadly not for now 😢
They should’ve just continued Burst until they found a way to create stronger parts that can handle the extreme speed of Beyblade X
BEYBLADE and VALORANT? I love this channel already:)
Burst Was so Good can they please just continue Burst The battles were epic and the beys didnt break every two minutes
The hasbro pro series was allright. Maybe 1 gram or 2 off weight but Maintains all features and gimmicks.
It was the non pro series that had a complete lack of all gimmicks. Hollowed out parts and No teeth for bursting,
The pro series was "worse" than takara but it was basically the same Mold using a slightly different plastic which i presume was cheaper
Fellow innocent, cog, enjoyer
Sorry, what does this mean? Lol.
Wdym bro your beyblade is just evolving, trust the process
At least the bit and blade lol
This is why I’m buying more than one of the same Beyblade
Same here!
They just need to bring metal fight beyblade lol
They really should have gone with Mattel instead of Hasbro. Mattel revamped Megablocks into Mega Constructs with plastic and chrome plating and prints that are better than lego is. They'd be able to make plastic better than Hasbro. But since Hasbro has history, Hasbro probably just said something like : "Hey beyblade since we know each other so well, I'll do it this cheap"
LMAO, it seems like any company that cares will have more credibility than Hasbro. Too bad TT doesn't care..
Really? I'll be honest, I know it's an issue, but I've personally never had anything break. Guess I play my shit a bit weaker haha! Sucks to hear that tho, part breakage sucks. I agree with the beat up ratchets thing tho, they burst so much easier.
low-priced toy who wear faster...not a big deal.
Plus i prefer if they wear and break, it adds that touch of realism to the game.
Ay bro, i would like to keep my money lol. 3 of my blades have broken so far.
@@UnshakableThug1 in japan u spend 7€ each…I bet you bought them at a HUGE reseller rate, so do not blame a 7€ toy that break
@@Average.lifter I did point out that Japan is much cheaper, but even then some parts are in gacha packs, and that alone is bad, but it's worse with breakable parts
@@UnshakableThug1 clearly with the prize beys you need to be extra careful, but i like that. Displaying cobalt drake or fight with him ruining it...i like that materialistic dilemma